Mechanical properties and corrosion resistance of AlxCoCuFeMn high-entropy alloys
Source abstract
Abstract
In the engineering application of alloys as structural materials, the mechanical properties and corrosion resistance are the key factors that need to be considered, and which are closely related to the microstructure. The effects of Al on the microstructure, mechanical properties and corrosion resistance of AlxCoCuFeMn (x = 0, 0.25, 0.5, 0.75, 1) high-entropy alloys (HEAs) have been investigated in the present work. The results indicate AlxCoCuFeMn HEAs have a typical dendritic structure, the Al free CoCuFeMn HEA has a Cu-rich FCC1 phase in interdendrites region and a Fe–Co rich FCC2 phase in dendrite region. When the content of Al increases, the fraction of FCC1 phase precipitated in the dendrite region, the FCC2 phase gradually developed into BCC&B2 phases, and finally only FCC1 and BCC&B2 phases were left in AlCoCuFeMn. With increasing of Al contents, the hardness and compressive yield strength of HEAs increased monotonically from 175 HV, 434 MPa to 463 HV, 1342 MPa, respectively. Meanwhile, the mass density decreased from 7.94 g/cm3 to 6.99 g/cm3 with increasing Al contents. The corrosion resistance of HEAs are ameliorated as the Al content increased. Among the five HEAs, AlCoCuFeMn shows remarkable comprehensive corrosion resistance, for which, the Ecorr and Icorr values are found to be −0.342 V and 5.53 × 10−6 A cm−2. The results of present study are useful to design low-cost corrosion-resistant HEAs with high strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Relative crystal stability of AlxFeNiCrCo high entropy alloys from XRD analysis and formation energy calculation10.1016/j.jallcom.2015.06.260 ↗
4. Synthesis and characterization of high-entropy alloy AlxFeCoNiCuCr by laser cladding
5. Characterization of BCC phases in AlCoCrFeNiTix high entropy alloys10.1016/j.matlet.2014.09.100 ↗
6. Synthesis and characterization of AlCoCrCuFeZnx high-entropy alloy by mechanical alloying10.1016/j.pnsc.2016.06.008 ↗
7. High-entropy alloys as a platform for catalysis: progress, challenges, and opportunities10.1021/acscatal.0c03617 ↗
8. Evaluation of microstructural and mechanical properties of AlxCrFeMnNi high entropy alloys10.1016/j.matpr.2019.12.320 ↗
9. Effect of Al content on microstructure and mechanical properties of as-cast AlxFeMnNiCrCu0.5 high-entropy alloys10.1016/j.msea.2021.142495 ↗
10. The effect of heat treatment at 1200 °C on microstructure and mechanical properties evolution of AlCoCrFeNiSiYHf high entropy alloys10.1016/j.vacuum.2022.111039 ↗
11. Development and oxidation behavior of high entropy silicide (NbMoTaWV)Si2 coatings on NbMoTaWV alloy10.1016/j.jallcom.2022.165384 ↗
12. Searching for magnetic high entropy alloy treasure in CoCrxFeNiQy10.1016/j.intermet.2022.107581 ↗
13. Supporting data for strengthening and deformation behavior of as-cast CoCrCu1.5MnNi high entropy alloy with micro-/nanoscale precipitation10.1016/j.dib.2022.108567 ↗
14. Effects of Al and Ti co-doping on the strength-ductility-corrosion resistance of CoCrFeNi-AlTi high-entropy alloys10.1016/j.jallcom.2022.166751 ↗
15. Effect of Cr content on microstructure characteristics and mechanical properties of ZrNbTaHf0.2Crx refractory high entropy alloy10.1016/j.jallcom.2022.166593 ↗
16. Microstructure and corrosion behavior of AlCrTiV-X (X = Cu, Mo, CuMo) high-entropy alloy films in 3.5 wt.% NaCl solution
17. Microstructure and properties of FeCoNiCrX (X=Mn, Al) high-entropy alloy coatings10.1016/j.jallcom.2022.166061 ↗
18. Influence of phase decomposition on mechanical behavior of an equiatomic CoCuFeMnNi high entropy alloy10.1016/j.actamat.2019.09.030 ↗
19. Microstructure evolution and mechanical properties of a novel CrNbTiZrAlx (0.25 ≤ x ≤ 1.25) eutectic refractory high-entropy alloy10.1016/j.matlet.2020.127869 ↗
20. Effect of Al content on structure and mechanical properties of the AlxCrNbTiVZr (x=0; 0.25; 0.5; 1) high-entropy alloys10.1016/j.matchar.2016.09.039 ↗
21. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
22. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
23. Microstructure, mechanical properties, and oxidation behavior of AlxCr0.4CuFe0.4MnNi high entropy alloys10.1002/adem.201600726 ↗
24. The effect of Al content on microstructures and comprehensive properties in AlxCoCrCuFeNi high entropy alloys10.1016/j.vacuum.2018.12.009 ↗
25. B2-strengthened Al-Co-Cr-Fe-Ni high entropy alloy with high ductility10.1016/j.matlet.2022.132828 ↗
26. Microstructure and corrosion properties of AlxCuFeNiCoCr(x=0.5, 1.0, 1.5, 2.0) high entropy alloys with Al content10.1016/j.jallcom.2022.165455 ↗
27. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
28. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
29. Hayes · 2016
30. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
31. High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating10.1016/j.apsusc.2018.03.135 ↗
32. Effect of Al content on the thermal oxidation behaviour of AlHfMoNbTi high-entropy alloys analysed by in situ environmental TEM10.1016/j.corsci.2021.109711 ↗
33. Microstructure and properties of AlCrFeNiCoCu high entropy alloy prepared by powder metallurgy10.1016/j.jallcom.2012.12.071 ↗
34. Mixing enthalpy of liquid phase calculated by Miedema's scheme and approximated with sub-regular solution model for assessing forming ability of amorphous and glassy alloys10.1016/j.intermet.2010.06.003 ↗
35. Effects of mixing enthalpy and cooling rate on phase formation of AlxCoCrCuFeNi high-entropy alloys10.1016/j.mtla.2019.100292 ↗
36. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
37. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
38. Formation condition of solid solution type high-entropy alloy10.1016/S1003-6326(13)62557-1 ↗
39. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
40. Gao · 2016
41. Liquid-phase separation in undercooled CoCrCuFeNi high entropy alloy10.1016/j.intermet.2017.03.021 ↗
42. Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties10.1063/1.2734517 ↗
43. A review on fundamental of high entropy alloys with promising high-temperature properties10.1016/j.jallcom.2018.05.067 ↗
44. Microstructure and mechanical properties of FeCoCrNiMn high-entropy alloy produced by mechanical alloying and vacuum hot pressing sintering10.1016/S1003-6326(18)64774-0 ↗
45. Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility10.1016/j.actamat.2017.10.058 ↗
46. Effects of Al addition on microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloy10.1016/j.msea.2015.09.034 ↗
47. A simple strategy for fabrication of an FCC-based complex concentrated alloy coating with hierarchical nanoprecipitates and enhanced mechanical properties
48. Achieving dual-phase structure and improved mechanical properties in AlCoCrFeTi0.5 high-entropy alloys by addition of Ni10.1016/j.msea.2021.142194 ↗
49. Mechanical properties and corrosion behavior of novel Al-Mg-Zn-Cu-Si lightweight high entropy alloys10.1016/j.jallcom.2021.163508 ↗
50. Effect of titanium addition on the corrosion behavior of CoCuFeNiMn high entropy alloy10.1016/j.jallcom.2022.163867 ↗
51. Microstructure formation mechanism and corrosion behavior of FeCrCuTiV two-phase high entropy alloy prepared by different processes10.1016/j.fusengdes.2021.112792 ↗
52. Effect of thermally induced B2 phase on the corrosion behavior of an Al0.3CoCrFeNi high entropy alloy10.1016/j.jallcom.2022.163886 ↗