journal article·2023-05Open access

Study on the corrosion electrochemistry behavior and wear resistance of the arc thermal sprayed Zn–Al alloy coating

Zou Zhixiang, Zeng Jiao, Liu Zhengwei, Mo Yuandong, Liang Guiming, Wang Liangliang, Guo Zhongning

Abstract

The mechanisms of deposition and solidification processes of molten droplets after collision with the substrate during arc spraying were investigated by Fluent simulation. Subsequently, the Al, ZnAl alloys and Zn–Al pseudo-alloy coatings were prepared by arc spraying through parameter optimization. Furthermore, the electrochemical properties of arc-sprayed Al, ZnAl alloys and Zn–Al pseudo-alloy coatings corroded in 3.5 wt% NaCl solution for different days were studied. The electrochemical impedance spectra (EIS) investigation indicated that the pitting corrosion occurred on the surface of Al coating, and even the substrate material also appeared to be corroded. In comparison, the Zn–Al pseudo-alloy coating has both pure Zn and Al coatings in a corrosive environment with the cathodic effect of sacrificial anode protection and the shielding effect of a passivated protective film. As a result, it has an excellent corrosion resistance. Meanwhile, the corrosion mechanism of arc-sprayed Al, ZnAl alloys and Zn–Al pseudo-alloy coatings was further characterized by the combination of SEM surface morphology and XRD pattern after the corrosion. Furthermore, the wear resistance of the above-mentioned coatings was examined, and the investigations showed that the arc-sprayed Zn–Al pseudo-alloy coatings also have an excellent wear resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Quantitative characterization of Q235B steel electrochemical corrosion by acoustic emission10.1016/j.ijpvp.2022.104686 ↗
2. Comparative study on ultra-low-cyclefatigue behavior of Q235 normal-steel and Q690 high-strength steel10.1016/j.jcsr.2022.107308 ↗
3. Improving corrosion stability of ZnAlMg by alloying for protection of car bodies10.1016/j.surfcoat.2016.03.062 ↗
4. Composition of corrosion products formed on Zn-Mg, Zn-Al and Zn-Al-Mg coatings in model atmospheric conditions
5. Formation sequence of Fe–Al intermetallic phases at interface between solid Fe and liquid Zn–6Al–3Mg alloy10.1016/j.intermet.2019.03.011 ↗
6. Anti-corrosion coatings for protection of steel railway structures exposed to atmospheric environments: a review10.1016/j.conbuildmat.2021.123115 ↗
7. A focused review on smart carriers tailored for corrosion protection: developments, applications, and challenges
8. Recent advances and future perspectives for carbon nanostructures reinforced organic coating for anti-corrosion application
9. Development of hydrothermal corrosion model and BWR metal coating for CVD SiC in light water reactors
10. In situ monitoring of the microstructural corrosion mechanisms of zinc–magnesium–aluminium alloys using time lapse microscopy10.1016/j.corsci.2011.02.043 ↗
11. Plastic metallicbarrier layer for crack propagation within plasma-sprayed Cu/ceramic coatings10.1016/j.surfcoat.2018.12.124 ↗
12. Microstructure and properties of Ti/TiBCN coating on 7075 aluminum alloy by laser cladding10.1016/j.surfcoat.2017.11.034 ↗
13. Experimental study on the electrochemical anti-corrosion properties of steel structures applying the arc thermal metal spraying method10.3390/ma7127722 ↗
14. A review on recent approaches in the field of hot dip zinc galvanizing process10.1016/j.surfcoat.2014.12.054 ↗
15. Frictional wear performance under oil-lubricated conditions and wear resistance mechanism of high-velocity arcsprayed FeNiCrAl coating10.1016/j.surfcoat.2018.08.060 ↗
16. Beyond traditional coatings: a review on thermal-sprayed functional and smart coatings10.1007/s11666-019-00857-1 ↗
17. Influence of bath temperature on zinc plating and passivation process10.1179/1743294412Y.0000000102 ↗
18. Corrosion behaviour of zinc deposits obtained under pulse current electrodeposition: effects of coumarin as additive10.1016/j.corsci.2008.12.020 ↗
19. Thermal spray deposition of aluminum and zinc coatings on thermoplastics10.1016/j.surfcoat.2020.126114 ↗
20. Anticorrosion behavior of polyvinyl butyral (PVB)/polymethylhydrosiloxane (PMHS)/chitosan (Ch) environment-friendly assembled coatings
21. Long-term corrosion behavior of the 7A85 aluminum alloy in an industrial-marine atmospheric environment10.1016/j.jmrt.2021.03.085 ↗
22. Hydrogen absorption, desorption and embrittlement of Zn and ZnNi-electrodeposited bolts10.1016/j.jmrt.2021.02.006 ↗
23. Electrodeposition of zinc–cobalt alloy from a complexing alkaline glycinate bath10.1016/j.electacta.2007.01.010 ↗
24. Corrosion behaviour of Zn-Ni alloy and Zn-Ni-nanoTiO2 composite coatings electrodeposited from ammonium citrate baths10.1016/j.psep.2020.05.048 ↗
25. Effect of Al and Sn on the microstructure, micro-hardness and corrosion properties of Zn-Al-Mg coatings
26. Corrosion electrochemistry properties of thermally sprayed Zn-Cu-Ti coating in simulated ocean atmosphere10.1016/j.jmrt.2022.10.108 ↗
27. Long-term atmospheric corrosion properties of thermally sprayed Zn, Al and Zn-Al coatings exposed in a coastal area10.1016/j.corsci.2013.05.021 ↗
28. Research on Zn-Al15 thermal spray metal coating and its organic painting composite system protection performance10.1016/j.proeng.2011.12.632 ↗
29. Evaluation of corrosion properties of steel with Zn-30 mass% Al thermalspray coating using accelerated atmospheric exposure test10.2320/matertrans.C-M2021821 ↗
30. Effect of laser surface melting on friction and wear behavior of AM50 magnesium alloy10.1016/j.surfcoat.2007.11.023 ↗
31. Friction and wear properties of plasma-sprayed Cr2O3–BaCrO4 coating at elevated temperatures10.1016/j.ceramint.2021.12.081 ↗