Local control of microstructure and mechanical properties of high-strength steel in electric arc-based additive manufacturing
Source abstract
Abstract
Additive manufacturing offers a significant potential for producing metallic parts with distinctly localised microstructures and mechanical properties, commonly known as functional grading. While functional grading is generally accomplished through compositional variations or in-situ thermo-mechanical treatments, variation of process parameters during additive manufacturing can offer a promising alternative approach. Focusing on the electric arc-based additive manufacturing process, this work focuses on the functional grading of high-strength steel (S690 grade) by adjusting the travel speed and inter-pass temperature. Through a combination of thermal simulations and experimental measurements on single bead-on-plate depositions, it is shown that the microstructure and the mechanical properties of parts can be controlled through the rational adjustment of process parameters. A rectangular block was fabricated to demonstrate functional grading using a constant wire feed rate and varying travel speed. The rectangular block consisted of a low heat input (LHI) region deposited sandwiched between high heat input (HHI) zones. A graded microstructure was obtained with the HHI zones composed of a mixture of polygonal ferrite, acicular ferrite, and bainite, while the LHI region being primarily composed of martensite. The hardness and profilometry-based indentation plastometry measurements indicated that the LHI region exhibited higher hardness (32%) and strength (50%), but lower uniform elongation (80%), compared to the HHI zones. The present study demonstrates the potential to achieve functional grading by adjusting process parameters in electric arc-based additive manufacturing, providing opportunities for tailor-made properties in parts.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Directed energy deposition (DED) additive manufacturing: physical characteristics, defects, challenges and applications10.1016/j.mattod.2021.03.020 ↗
2. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
3. A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement10.1016/j.jmapro.2018.08.001 ↗
4. Wire + arc additive manufacturing10.1179/1743284715Y.0000000073 ↗
5. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
6. An overview of Direct Laser Deposition for additive manufacturing; Part II: mechanical behavior, process parameter optimization and control
7. Wire and arc additive manufacturing of HSLA steel: effect of thermal cycles on microstructure and mechanical properties
8. A study on wire and arc additive manufacturing of low-carbon steel components: process stability, microstructural and mechanical properties10.1007/s40430-020-02567-0 ↗
9. The effect of groove shape on molten metal flow behaviour in gas metal arc welding10.3390/ma14237444 ↗
10. The effects of process parameters on melt-pool oscillatory behaviour in gas tungsten arc welding10.1088/1361-6463/abf808 ↗
11. Measuring the melt pool size in a wire arc additive manufacturing process using a high dynamic range two-colored pyrometric camera10.1007/s40194-020-00892-5 ↗
12. A review on wire arc additive manufacturing: monitoring, control and a framework of automated system10.1016/j.jmsy.2020.08.008 ↗
13. A simulation-based approach to characterise melt-pool oscillations during gas tungsten arc welding10.1016/j.ijheatmasstransfer.2020.120535 ↗
14. Microstructure and mechanical properties of low-carbon high-strength steel fabricated by wire and arc additive manufacturing10.3390/met10020216 ↗
15. Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing10.1007/s00170-019-04393-8 ↗
16. On microstructure and mechanical properties of a low-carbon low-alloy steel block fabricated by wire arc additive manufacturing10.1007/s11665-021-05568-9 ↗
17. Wire and arc additive manufacturing of high-strength low-alloy steel: microstructure and mechanical properties10.1002/adem.202001036 ↗
18. Mechanical characterization and fatigue assessment of wire and arc additively manufactured HSLA steel parts10.1016/j.ijfatigue.2022.107146 ↗
19. Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure
20. Parametric study and characterization of wire arc additive manufactured steel structures10.1007/s00170-021-07261-6 ↗
21. Effect of thermal history on microstructure evolution and mechanical properties in wire arc additive manufacturing of HSLA steel functionally graded components10.1016/j.msea.2022.143569 ↗
22. Wire arc additive manufacturing of high-strength low alloy steels: study of process parameters and their influence on the bead geometry and mechanical characteristics10.1007/s00170-020-05482-9 ↗
23. A review of wire arc additive manufacturing: development, principles, process physics, implementation and current status10.1088/1361-6463/ac1e4a ↗
24. A review of research on high-strength steel structures10.1680/jstbu.16.00197 ↗
25. Bhadeshia · 2017
26. Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments10.1016/j.actamat.2014.04.045 ↗
27. A metallurgical phase transformation framework applied to SLM additive manufacturing processes10.1016/j.matdes.2019.107618 ↗
28. Kou · 2002
29. Ouden · 2009
30. Effects of cooling conditions on the shape, microstructures, and material properties of SS308L thin walls built by wire arc additive manufacturing10.1016/j.matlet.2020.128580 ↗
31. Tailoring microstructural features of wire arc additive manufacturing 2Cr13 part via varying inter-layer dwelling time10.1016/j.matlet.2018.08.037 ↗
32. Wire arc additive manufacturing of Ti6AL4V using active interpass cooling10.1080/10426914.2020.1732414 ↗
33. Microstructure estimation and validation of ER110S-G steel structures produced by wire and arc additive manufacturing10.1016/j.jmrt.2023.01.214 ↗
34. Steel-copper functionally graded material produced by twin-wire and arc additive manufacturing (T-WAAM)10.1016/j.matdes.2021.110270 ↗
35. Weld bead modeling and process optimization in Hybrid Layered Manufacturing10.1016/j.cad.2011.01.006 ↗
36. Selection of parameters of pulsed current gas metal arc welding10.1016/j.jmatprotec.2005.07.013 ↗
37. A new finite element model for welding heat sources10.1007/BF02667333 ↗
38. Simplified numerical model for the laser metal deposition additive manufacturing process10.2351/1.4983251 ↗
39. A smart model to estimate effective thermal conductivity and viscosity in the weld pool10.1063/1.1695593 ↗
40. Numerical study of molten metal melt pool behaviour during conduction-mode laser spot melting10.1088/1361-6463/abca62 ↗
41. Computer modeling of heat flow in welds10.1007/BF02670226 ↗
42. Modeling metal deposition in heat transfer analyses of additive manufacturing processes10.1016/j.finel.2014.04.003 ↗
43. The relationship between stress and strain for homogeneous deformation
44. Experimental and computational issues for automated extraction of plasticity parameters from spherical indentation10.1016/j.mechmat.2018.06.004 ↗
45. Comparison between stress-strain plots obtained from indentation plastometry, based on residual indent profiles, and from uniaxial testing10.1016/j.actamat.2019.02.006 ↗
46. Indentation plastometry of very hard metals10.1002/adem.202101398 ↗
47. Indentation plastometry of welds10.1002/adem.202101645 ↗
48. Profilometry-based inverse finite element method indentation plastometry10.1002/adem.202100437 ↗
49. Modelling the continuous cooling transformation diagram of engineering steels using neural networks Part I: phase regions
50. Austenite decomposition during continuous cooling of an HSLA-80 plate steel10.1007/BF02649815 ↗
51. Continuous cooling transformations and microstructures in a low-carbon, high-strength low-alloy plate steel10.1007/BF02672564 ↗
52. Microstructural characterisation of thick-walled wire arc additively manufactured stainless steel10.1016/j.jmatprotec.2021.117373 ↗
53. The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V10.1016/j.matchar.2016.02.001 ↗
54. Grain structure control during metal 3D printing by high-intensity ultrasound10.1038/s41467-019-13874-z ↗
55. Evolution of solidification texture during additive manufacturing10.1038/srep16446 ↗
56. Effect of solidification defects and HAZ softening on the anisotropic mechanical properties of a wire arc additive-manufactured low-carbon low-alloy steel part10.1007/s11837-019-03773-5 ↗
57. The mechanism of acicular ferrite in weld deposits10.1016/j.cossms.2004.10.001 ↗
58. Microstructure and mechanical properties of high strength steel deposits obtained by Wire-Arc Additive Manufacturing10.1016/j.jmatprotec.2020.116759 ↗
59. Analysis of fracture toughness properties of wire + arc additive manufactured high strength low alloy structural steel components10.1016/j.msea.2019.138285 ↗
60. Microstructure and mechanical properties of bainite containing martensite and retained austenite in low carbon HSLA steels10.2320/matertrans1989.32.715 ↗
61. Retained austenite transformation during heat treatment of a 5 Wt pct Cr cold work tool steel10.1007/s11661-017-4232-5 ↗
62. Characterization of martensite-austenite constituents and micro-hardness in intercritical reheated and coarse-grained heat affected zones of API X70 HSLA steel10.1016/j.matchar.2018.05.057 ↗
63. Correlation of microstructure and fracture properties in weld heat- affected zones of thermomechanically controlled processed steels10.1007/BF02651759 ↗
64. Influence of martensite-austenite (MA) on impact toughness of X80 line pipe steels10.1016/j.msea.2016.03.095 ↗
65. Effect of cooling rate on intercritically reheated microstructure and toughness in high strength low alloy steel10.1179/mst.1993.9.1.8 ↗
66. Microstructure characterization and its relationship with impact toughness of C-Mn and high strength low alloy steel weld metals - a review10.1016/j.jmrt.2020.12.006 ↗
67. Wang · 2016 · 481
68. Martensite in steel: strength and structure10.1016/S0921-5093(99)00288-9 ↗
69. Krauss G. Tempering of lath martensite in low and medium carbon steels: assessment and challenges.
70. Effect of microstructural variation on weld metal cold cracking of HSLA-100 steel10.2355/isijinternational.43.706 ↗
71. Assessment of heat-affected zone softening of hot-press-formed steel over 2.0 GPa tensile strength with bead-on-plate laser welding10.3390/app11135774 ↗
72. López · 2012 · 67
73. Influence of the soft zone on the strength of welded modern hsla steels10.1007/BF03321352 ↗
74. Microstructural evolution and its influence on toughness in simulated inter-critical heat affected zone of large thickness bainitic steel10.1016/j.msea.2018.11.070 ↗
75. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗