Fabrication and characterization of weld attributes in hot gas welding of alkali treated hybrid flax fiber and pine cone fibers reinforced poly-lactic acid (PLA) based biodegradable polymer composites: studies on mechanical and morphological properties
Source abstract
Abstract
The contemporary times have witnessed a lot of interest in fabricating green composites because of its biodegradability, durability, affordability, ease of manufacturing and its potential to replace existing commercial goods in the field of engineering applications. The green composites are envisaged to replace synthetic polymer-based composites since the green composites are fabricated using the biodegradable polymers reinforced with natural fibers. In this research work, Flax Fiber and Pine Cone Fibers are reinforced in Poly-lactic Acid (PLA) matrix. The green composites are fabricated using compression moulding technique in different nominations as per the weight fraction such as (90:10), (80:20) and (70:30). It was noticed that a higher tensile strength of 27 MPa is observed in case of group 2 (80:20) specifically for the composite having 80% of matrix and 14% flax and 6% pine cone fibers. An IoT based automatic hot gas welding method was used to join the fibers by considering various input parameters like stand of distance, weld rate, specimen groove geometry, and composition. The mechanical testing of the weld specimens was carried. It was observed that the weld joints having higher stand of distance were observed to have less tensile strength as compared to others and the fracture points of such specimens were observed to be at the weld bead. SEM analysis of the fracture point validated the observations from the mechanical characterization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Additive Manufacturing and 3D Printing Technologies · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Evaluation of mechanical and thermal properties of pine cone fibers reinforced compatibilized polypropylene10.1016/j.matdes.2012.04.032 ↗
2. Combination of poly(lactic) acid and starch for biodegradable food packaging10.3390/ma10080952 ↗
3. Experimental and thermomechanical analysis of the effect of tool pin profile on the friction stir welding of poly (methyl methacrylate) sheets10.1016/j.jmapro.2018.06.015 ↗
4. The effect of treatment on kenaf fi ber using green approach and their reinforced epoxy composites
5. Preparation and characterization of Kenaf papers reinforced with Tapioca starch: physicomechanical and morphological properties10.1080/15440478.2017.1321518 ↗
6. Biodegradable polymer compounds reinforced with banana fiber for the production of protective bags for banana fruits in the context of circular economy10.3390/agronomy11020242 ↗
7. Biodegradable green composites: it's never too late to mend
8. Hedysarum coronarium-based green composites prepared by compression molding and fused deposition modeling10.3390/ma15020465 ↗
9. Green composites based on mater-Bi® and Solanum lycopersicum plant waste for 3D printing applications10.3390/polym15020325 ↗
10. Opuntia Ficus Indica based green composites for NPK fertilizer controlled release produced by compression molding and fused deposition modeling
11. Mechanical properties of compression molded epoxy polymer composites reinforced with kenaf fibers
12. Development and characterization of PLA-based green composites: a review10.1177/0892705712439571 ↗
13. A review of bast fibres and their composites: part 3—modelling
14. PLA based biopolymer reinforced with natural fibre: a review10.1007/s10924-011-0320-6 ↗
15. Improving moisture durability of flax fibre composites by using non-dry fibres10.1016/j.compositesa.2019.05.029 ↗
16. Composition of the essential oils from the 371 leaves of nine pinus species and the cones of three of Pinus species10.1002/ffj.1609 ↗
17. Dynamical mechanical behaviors of rubber-filled wood fiber composites with urea formaldehyde resin10.1016/j.jobab.2022.05.004 ↗
18. Ultra-lightweight 3D woven spacer integrated composites with stabilization of dielectric and robust mechanical properties at room and elevated temperatures10.1002/pc.26917 ↗
19. Research on mechanical behavior of the flax/polyactic acid composites10.1177/0731684409355201 ↗
20. Amancio Friction spot joining of aluminum alloy 2024-T3 and carbon-fiber-reinforced poly(phenylene sulfide) laminate with additional PPS film interlayer: microstructure, mechanical strength and failure mechanisms-10.1016/j.compositesb.2016.03.011 ↗
21. Pal Multi-objective optimization in through laser transmission welding of thermoplastics using grey-based Taguchi method Proced
22. Effect of surface modification on laser direct joining of cyclic olefin polymer and stainless steel10.1016/j.matdes.2014.03.018 ↗
23. Friction stir welding of high density polyethylene-carbon black composite10.1016/j.jmatprotec.2018.09.033 ↗
24. Application of Taguchi method for parametric optimization of through transmission laser welding of acrylic plastics
25. M. Flax fibres reinforced polylactide modified by ionizing radiation10.1016/j.indcrop.2018.01.004 ↗
26. American chemistry council implementing plastic and polymer composite light weighting solutions to meet 2025 corporate average fuel economy standards plastic
27. Influence of fiber volume fraction and curing temperature on mechanical properties of jute/PLA green composites
28. Moisture absorption effects on the mechanical properties of carbon/epoxy composites
29. 2008
30. 2002
31. 1995
32. The effect of treatment on kenaf fiber using green approach and their reinforced epoxy composites10.1016/j.compositesb.2016.08.010 ↗
33. Green composites based on biodegradable polymers and anchovy (Engraulis Encrasicolus) waste suitable for 3D printing applications10.1016/j.compscitech.2022.109768 ↗
34. Regulating the alkyl chain length of quaternary ammonium salt to enhance the inkjet printing performance on cationic cotton fabric with reactive dye ink10.1021/acsami.3c02304 ↗
35. Supramolecular nonwoven materials via thermally induced precursor crystallization of nanocrystalline fibers/belts for recyclable air filters10.1021/acsanm.3c01254 ↗
36. Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy10.1016/j.vacuum.2022.111532 ↗
37. Molecular dynamics simulation and experimental study of tin growth in SAC lead-free microsolder joints under thermo-mechanical-electrical coupling
38. Impacts of biochars on bacterial community shifts and biodegradation of antibiotics in an agricultural soil during short-term incubation10.1016/j.scitotenv.2020.144751 ↗
39. Mg gas infiltration for the fabrication of MgB2 pellets using nanosized and microsized B powders10.1016/j.jeurceramsoc.2022.08.029 ↗
40. Bio-inspired strip-shaped composite composed of glass fabric and waste selvedge from A. pernyi silk for lightweight and high-impact applications10.1016/j.compositesa.2023.107715 ↗
41. Hexafluoro isopropanol based silk fibroin coatings on AZ31 biometals with enhanced adhesion, corrosion resistance and biocompatibility
42. Sulfur-doped g-C3N4/rGO porous nanosheets for highly efficient photocatalytic degradation of refractory contaminants10.1016/j.jmst.2019.09.018 ↗
43. Current research status of interface of ceramic-metal laminated composite material for armor protection
44. Microstructure and properties of graphene nanoplatelets reinforced AZ91D matrix composites prepared by electromagnetic stirring casting10.1016/j.jmrt.2022.11.033 ↗
45. Microstructural evolution in graphene nanoplatelets reinforced magnesium matrix composites fabricated through thixomolding process10.1016/j.jallcom.2023.168824 ↗
46. Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy
47. Enhanced efficiency with CDCA co-adsorption for dye-sensitized solar cells based on metallosalophen complexes10.1016/j.solener.2020.08.096 ↗
48. Synthesis and characterization of Eu(III) complexes of modified cellulose and poly(N-isopropylacrylamide)10.1016/j.carbpol.2013.01.045 ↗
49. Synthesis and characterization of phenylboronic acid-containing polymer for glucose-triggered drug delivery+10.1080/14686996.2019.1700394 ↗
50. Correlating multi-scale structure characteristics to mechanical behavior of Caprinae horn sheaths10.1016/j.jmrt.2022.10.044 ↗
51. Integrating tough Antheraea pernyi silk and strong carbon fibres for impact-critical structural composites10.1038/s41467-019-11520-2 ↗
52. Comparison of toughening mechanisms in natural silk-reinforced composites with three epoxy resin matrices10.1016/j.compositesa.2021.106760 ↗
53. Fabrication of novel polymer composites from leather waste fibers and recycled poly(ethylene-vinyl-acetate) for value-added products10.3390/su15054333 ↗
54. Effect of nanoadditives on the novel leather fiber/recycled poly(ethylene-vinyl-acetate) polymer composites for multifunctional applications: fabrication, characterizations, and multiobjective optimization using central composite design10.1515/ntrev-2022-0067 ↗
55. Emerging progressive developments in the fibrous composites for acoustic applications10.1016/j.jmapro.2023.07.053 ↗
56. Recent progressive developments in conductive-fillers based polymer nanocomposites (CFPNC's) and conducting polymeric nanocomposites (CPNC's) for multifaceted sensing applications
57. Ranakoti · J Mater Res Technol · 2022 · 19 · 286310.1016/j.jmrt.2022.06.024 ↗
58. Influences of various thermal cyclic behaviours on thermo adsorption/mechanical characteristics of epoxy composite enriched with basalt fiber10.1155/2023/9716173 ↗
59. Critical review on advancements on the fiber-reinforced composites: role of fiber/matrix modification on the performance of the fibrous composites10.1016/j.jmrt.2023.08.036 ↗
60. Effect of the addition of TiB2 with waste glass powder on microstructure, mechanical and physical behavior of PET-based polymer composite material10.1080/15376494.2023.2249888 ↗
61. Study on the physicomechanical, fracture-deformation, interface-adhesion, and water-absorption properties of twill fabric cotton-bamboo/epoxy composites10.1016/j.jmrt.2023.05.102 ↗
62. Mechanical, fracture-deformation, and tribology behaviour of fillers-reinforced sisal fiber composites for lightweight automotive applications10.1515/rams-2023-0342 ↗
63. Abhinav kumar, bashir salah, syed sajid ullah. Exploring the mechanical, tribological, and morphological characteristics of areca fiber epoxy composites reinforced with various fillers for multifaceted applications10.3389/fmats.2023.1185215 ↗
64. Fabrication and characterizations of Glass fiber-reinforced functional leaf spring composites with or without microcapsule-based dicyclopentadiene as self-healing agent for automobile industrial applications: comparative analysis
65. Fiber-reinforced composites in milling and grinding: machining bottlenecks and advanced strategies
66. Mishra · 2022
67. Effect of hybridization on physio-mechanical behavior of vetiver and jute fibres reinforced epoxy composites for structural applications: studies on fabrication, physicomechanical, water-absorption, and morphological properties
68. Dry sliding wear characteristics of natural fibre reinforced poly-lactic acid composites for Engineering applications: fabrication, properties and characterizations10.1016/j.jmrt.2023.01.006 ↗
69. Investigation of copper reinforced Acrylonitrile butadiene styrene and Nyl on 6 based thermoplastic polymer nanocomposite filaments for 3D Printing of Electro nic Components
70. Effect of marbles dust on mechanical, morphological, and wear performance of basalt fibre reinforced epoxy composites for structural applications10.3390/polym14071325 ↗
71. Evaluation of various properties for spent alumina catalyst and Si3N4 reinforced with PET-based polymer composite10.1080/15376494.2023.2249888 ↗
72. Critical review on polylactic acid: properties, structure, processing, biocomposites, and nanocomposites10.3390/ma15124312 ↗
73. Critical review on advancements on the fiber-reinforced composites: role of fiber/matrix modification on the performance of the fibrous composites10.1016/j.jmrt.2023.08.036 ↗