journal article·2023-11Open access

MXene-decorated bio-based porous carbon composite phase change material for superior solar-thermal energy storage and thermal management of electronic components

Wenjing Chen, Shikun Xiao, Yi Liu, Xiaowu Hu, Yuqiong Xie, Yichi Liu, Yan Ma, Lixiang Luo, Xiongxin Jiang

Abstract

Energy storage technology based on phase change materials (PCM) can effectively solve the problem of poor energy utilization. However, PCM suffer from problems such as low thermal conductivity and easy leakage, which seriously hinder their application in fields such as thermal energy storage. To solve the above issues, this research prepared a series of novel composite PCM by immersing polyethylene glycol (PEG) into MXene-wrapped wood-based porous carbon support materials through a simple vacuum impregnation method. Specially, the balsa wood-derived porous carbon has excellent skeletal structure and hydrophilicity under 1000 °C carbonization temperature and delignification treatment. Further, the effect of MXene content on the properties of the composite PCM was systematically investigated. It was shown that the composite PCM (PDM-20) made within 20 mg/mL MXene dispersion had the best overall performance, with a significant increase in thermal conductivity up to 0.69 W m-1 K-1, the enthalpy efficiency and relative enthalpy efficiency values of 96.8%/103.0%, respectively, while the photo-thermal conversion efficiency reaching 90.1%, which was much higher than that of the unmodified composite PCM. In addition, PDM-20 provided a remarkable delayed effect on the heating and cooling of electronic components. Therefore, PDM-20 prepared in this study has broad application prospects in heat storage, solar thermal absorption and heat management of electronic devices. Meanwhile, it also offers a new idea for the development and fabrication of green and environmentally friendly composite PCM.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · MXene and MAX Phase Materials · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Optically-controlled long-term storage and release of thermal energy in phase-change materials10.1038/s41467-017-01608-y ↗
2. MXene@C heterogeneous nanocomposites with the 2D-0D structure for ultra-light and broadband electromagnetic wave absorption10.1016/j.carbon.2022.06.070 ↗
3. Direct measurement of crystal growth velocity in epitaxial phase-change material thin films10.1021/acsami.9b16111 ↗
4. Tetrapods based engineering of organic phase change material for thermal energy storage10.1016/j.cej.2023.141984 ↗
5. Performance optimization of metal hydride hydrogen storage reactors based on PCM thermal management10.1016/j.apenergy.2023.120923 ↗
6. Photothermal and thermoelectric performance of PCMs doped with nanoparticles and metal foam10.1016/j.icheatmasstransfer.2023.106712 ↗
7. A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management10.1016/j.apenergy.2023.121658 ↗
8. Development of cost-effective PCM-carbon foam composites for thermal energy storage10.1016/j.egyr.2021.12.065 ↗
9. Confined crystals of the smallest phase-change material10.1021/nl4010354 ↗
10. Experimental study on nano-encapsulated inorganic phase change material for lithium-ion battery thermal management and thermal runaway suppression10.1016/j.cej.2023.142401 ↗
11. A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management
12. Ti3C2Tx MXene-based flexible piezoresistive physical sensors10.1021/acsnano.1c09925 ↗
13. Enzymolysis-treated wood-derived hierarchical porous carbon for fluorescence-functionalized phase change materials10.1016/j.compositesb.2022.109735 ↗
14. Forecasting energy demand of PCM integrated residential buildings: a machine learning approach10.1016/j.jobe.2023.106335 ↗
15. Enhanced thermal performance of phase-change materials supported by mesoporous silica modified with polydopamine/nano-metal particles for thermal energy storage10.1016/j.renene.2021.06.021 ↗
16. Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials10.1016/j.energy.2018.09.128 ↗
17. Photo-triggered hierarchical porous carbon-based composite phase-change materials with superior thermal energy conversion capacity10.1021/acssuschemeng.9b07659 ↗
18. Review on form-stable inorganic hydrated salt phase change materials: preparation, characterization and effect on the thermophysical properties10.1016/j.apenergy.2021.116845 ↗
19. Construction of wheat bran biomass porous aerogel by starch pasting for fabrication of phase change composites with high latent heat storage and temperature regulation10.1021/acs.energyfuels.3c00447 ↗
20. 3D lamellar structure of biomass-based porous carbon derived from towel gourd toward phase change composites with thermal management and protection10.1021/acsabm.0c01196 ↗
21. Nanosilver modified navel orange peel foam/polyethylene glycol composite phase change materials with improved thermal conductivity and photo-thermal conversion efficiency10.1016/j.est.2022.105976 ↗
22. Shape-stabilized phase-change materials supported by eggplant-derived porous carbon for efficient solar-to-thermal energy conversion and storage10.1039/C9SE01272A ↗
23. Enhanced thermal performance of phase change materials supported by hierarchical porous carbon modified with polydopamine/nano-Ag for thermal energy storage10.1016/j.est.2022.104129 ↗
24. Nano-Ag modified bio-based loofah foam/polyethylene glycol composite phase change materials with higher photo-thermal conversion efficiency and thermal conductivity10.1016/j.est.2022.105238 ↗
25. Cellulose nanofibrous/MXene aerogel encapsulated phase change composites with excellent thermal energy conversion and storage capacity10.1016/j.energy.2022.125505 ↗
26. 25th anniversary article: MXenes: a new family of two-dimensional materials10.1002/adma.201304138 ↗
27. Safety issue on PCM-based battery thermal management: material thermal stability and system hazard mitigation10.1016/j.ensm.2022.09.007 ↗
28. Anisotropic hemp-stem-derived biochar supported phase change materials with efficient solar-thermal energy conversion and storage10.1007/s42773-022-00162-1 ↗
29. Nickel foam/Covalent-Organic Frameworks for composite phase change materials with enhanced solar-thermal energy conversion and storage capacity10.1016/j.applthermaleng.2023.120808 ↗
30. Shape-stabilized phase change composites supported by biomass loofah sponge-derived microtubular carbon scaffold toward thermal energy storage and electric-to-thermal conversion10.1016/j.est.2022.105891 ↗
31. Hierarchical porous carbon foam-based phase change composite with enhanced loading capacity and thermal conductivity for efficient thermal energy storage10.1016/j.renene.2021.03.071 ↗
32. Enhanced photothermal conversion capability of melamine foam-derived carbon foam-based form-stable phase change composites10.1016/j.enconman.2022.115693 ↗
33. Sandwich-structured MXene/wood aerogel with waste heat utilization for continuous desalination10.1016/j.cej.2022.140362 ↗
34. Ultra-light MXene aerogel/wood-derived porous carbon composites with wall-like "mortar/brick" structures for electromagnetic interference shielding10.1016/j.scib.2020.02.009 ↗
35. Anisotropic reed-stem-derived hierarchical porous biochars supported paraffin wax for efficient solar-thermal energy conversion and storage10.1016/j.est.2022.106153 ↗
36. Honeycomb-like structured biological porous carbon encapsulating PEG: a shape-stable phase change material with enhanced thermal conductivity for thermal energy storage10.1016/j.enbuild.2017.10.078 ↗
37. Fully bio-based Poly (Glycerol-Itaconic acid) as supporter for PEG based form stable phase change materials10.1016/j.coco.2021.100893 ↗
38. Dual-encapsulated multifunctional phase change composites based on biological porous carbon for efficient energy storage and conversion, thermal management, and electromagnetic interference shielding10.1016/j.est.2022.105358 ↗
39. Automatic coupling of ABAQUS and a boundary element code for dynamic elastoplastic problems10.1016/j.enganabound.2015.12.021 ↗
40. A facile synthesis of solid-solid phase change material for thermal energy storage10.1016/j.applthermaleng.2016.10.088 ↗
41. Hybrid network structure of boron nitride and graphene oxide in shape-stabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability10.1016/j.solmat.2017.08.025 ↗
42. Sandwich-structured MXene/wood aerogel with waste heat utilization for continuous desalination10.1016/j.cej.2022.140362 ↗
43. Polyethylene glycol phase change material embedded in a hierarchical porous carbon with superior thermal storage capacity and excellent stability10.1016/j.compscitech.2021.108832 ↗
44. Three-dimensional montmorillonite/Ag nanowire aerogel supported stearic acid as composite phase change materials for superior solar-thermal energy harvesting and storage10.1016/j.compscitech.2021.109121 ↗
45. Microscopic optimization model and algorithm for integrating train timetabling and track maintenance task scheduling10.1016/j.trb.2019.07.010 ↗
46. Graphene embedded form stable phase change materials for drawing the thermo-electric energy harvesting10.1016/j.enconman.2018.05.001 ↗
47. Emerging PEG/VO2 dual phase change materials for thermal energy storage10.1016/j.solmat.2022.111686 ↗
48. Local surface plasmon resonance assisted energy harvesting in thin film organic solar cells10.1016/j.jallcom.2020.158172 ↗
49. Biomass porous potatoes/MXene encapsulated PEG-based PCMs with improved photo-to-thermal conversion capability10.1016/j.solmat.2021.111559 ↗
50. Polyurethane-based solid-solid phase change materials with in situ reduced graphene oxide for light-thermal energy conversion and storage10.1016/j.cej.2018.01.021 ↗
51. Phase change material enhanced radiative cooler for temperature-adaptive thermal regulation10.1021/acsnano.2c11916 ↗
52. Highly efficient photo-thermal effect by atomic-thickness confinement in two-dimensional ZrNCl nanosheets10.1021/nn506473m ↗
53. Self-floating carbon nanotube membrane on macroporous silica substrate for highly efficient solar-driven interfacial water evaporation10.1021/acssuschemeng.5b01274 ↗
54. Form-Stable phase change composites based on porous carbon derived from polyacrylonitrile hydrogel10.1016/j.cej.2021.134206 ↗