journal article·2023-11Open access

Influences of Ti and Mo alloying on the microstructure and properties of laser cladding for CoCrFeNi high-entropy alloys

Guofu Lian, Jianghuai Yang, Changrong Chen, Xu Huang, Meiyan Feng

Abstract

The CoCrFeNiTi_(1-x) Mo_x high-entropy-alloy coating was prepared using a powder presetting method. The work investigated the influences of Ti and Mo addition on the microstructure and properties of CoCrFeNi high-entropy alloys. The first-principles calculation showed that CoCrFeNiTi_(1-x) Mo_x was mainly composed of the FCC phase, BCC phase, and IMCs. The coating exhibited high hardness, and the mechanical stability of the high-entropy alloys of FCC and BCC phases was maintained when x = 0.5. The coating primarily consisted of FCC, BCC, σand CoTi2 phases when x ≤ 0.75. The coating primarily consisted of FCC, BCC, σand Co2Mo3 phases when x = 1. It exhibited high microhardness, elastic modulus, elastic stiffness, and wear resistance when x = 0.5. Its average microhardness, local elastic modulus, and elastic stiffness were 873.28 HV0.5, 265.5606 GPa, and 102.8008 GPa, respectively. Besides, COF and the wear mass loss were 0.7026 mm3 and 0.0410 mm3, respectively. The coating exhibited exceptional corrosion resistance with a self-corrosion voltage of −0.700 V and a self-corrosion current of 5.387e-007 A when x = 1. The results offer practical guidance for preparing high-entropy-alloy coatings with various advantages as well as a theoretical foundation for preparing such alloys by laser cladding.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Microstructure and mechanical properties of Ti–C–TiN-reinforced Ni204-based laser-cladding composite coating10.1016/j.ceramint.2020.11.054 ↗
2. Recent research and development status of laser cladding: a review10.1016/j.optlastec.2021.106915 ↗
3. Research and progress of laser cladding on engineering alloys: a review10.1016/j.jmapro.2021.03.061 ↗
4. Synthesis and characterization of refractory TiZrNbWMo high-entropy alloy coating by laser cladding10.1016/j.surfcoat.2017.01.012 ↗
5. Microstructure and properties of 6FeNiCoSiCrAlTi high-entropy alloy coating prepared by laser cladding10.1016/j.apsusc.2010.09.084 ↗
6. Solid solution island of the Co-Cr-Fe-Ni high entropy alloy
7. Microstructure and wear behavior of atmospheric plasma-sprayed AlCoCrFeNiTi high-entropy alloy coating10.1007/s11665-016-2396-6 ↗
8. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic
9. Effect of Ti content on the microstructure and corrosion resistance of CoCrFeNiTix high entropy alloys prepared by laser cladding10.3390/ma13102209 ↗
10. Evolution in microstructure, wear, corrosion, and tribocorrosion behavior of Mo-containing high-entropy alloy coatings fabricated by laser cladding10.1016/j.corsci.2021.109727 ↗
11. A geometrical parameter for the formation of disordered solid solutions in multi-component alloys10.1016/j.intermet.2014.04.019 ↗
12. The mechanical properties of high entropy (-like) alloy Wx (TaTiVCr) 1-x via first-principles calculations10.1016/j.fusengdes.2018.08.008 ↗
13. Phase composition prediction of Al-Co-Cr-Fe-Ni high entropy alloy system based on thermodynamic and electronic properties calculations10.1016/j.matpr.2021.01.079 ↗
14. Atomic-size effect and solid solubility of multicomponent alloys10.1016/j.scriptamat.2014.09.010 ↗
15. Microstructure, mechanical property and corrosion resistance of FeCoCrNi-M high-entropy alloy coatings on 6061 aluminum alloy prepared by laser cladding10.1016/j.surfcoat.2022.129217 ↗
16. Effects of electro-negativity on the stability of topologically close-packed phase in high entropy alloys10.1016/j.intermet.2014.04.001 ↗
17. Microstructure, thermostability and tribological behavior of composite CoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding10.1016/j.ijleo.2023.170899 ↗
18. Investigation on solid particles erosion resistance of laser cladded CoCrFeNiTi high entropy alloy coating10.1016/j.intermet.2021.107111 ↗
19. Applications of special quasi-random structures to high-entropy alloys10.1007/978-3-319-27013-5_10 ↗
20. Computational modeling of high-entropy alloys: structures, thermodynamics and elasticity10.1557/jmr.2017.366 ↗
21. Effect of Ti addition on microstructure and tribological properties of laser cladding Ni35/WC coating in an oxygen-free environment10.1016/j.surfcoat.2022.128480 ↗
22. Local atomic structure of a high-entropy alloy: an X-ray and neutron scattering study10.1007/s11661-012-1474-0 ↗
23. Microstructure and properties of CoCrFeNiTi high-entropy alloy coating fabricated by laser cladding10.1007/s11665-020-05204-y ↗
24. Phase selection, lattice distortions, and mechanical properties in high‐entropy alloys10.1002/adem.202000466 ↗
25. Design and characterization on microstructure evolution and properties of laser-cladding Ni1. 5CrFeTi2B0. 5Mox high-entropy alloy coatings10.1016/j.surfcoat.2020.126793 ↗