Optimizing process parameters for hot forging of Ti-6242 alloy: A machine learning and FEM simulation approach
Source abstract
Abstract
In this study, we investigated the hot deformation behavior of Ti–6Al–2Sn–4Zr–2Mo (Ti-6242) alloy and propose a method to derive optimal hot process parameters for grain refinement and avoidance of flow instability. Microstructural Risk Index (MRI) was introduced as a microstructural evaluation index consisting of grain size, standard deviation of grain size, and flow instability. The initial temperature of the material and the stroke speed of the die were selected as design variables. Finite element analysis (FEA) was used to calculate grain size and flow instability and determine MRI of the forgings. The grain size model coefficient and flow instability were calculated based on the flow stress curve and verified with optical microscope (OM) and electron backscatter diffraction (EBSD) analysis results. The Deep Neural Network (DNN) model was used to determine the optimal process parameters for the forging process. The MRI prediction accuracy of the trained DNN models showed excellent performance at 97.01 %. The MRI of the optimized process variables was improved by 7.95 % compared to the minimum MRI of the training data set. Optimized process parameters can improve the quality of forgings through grain refinement and avoidance of flow instability regions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Thermo-mechanical material response and hot sheet metal forming of Ti-624210.1016/j.msea.2007.12.047 ↗
2. Flow characterization of a duplex near α Ti6242 alloy through interrelation of microstructural evolution, 3D activation energy map, and processing map10.1002/adem.201500426 ↗
3. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
4. High-temperature flow characterization and microstructural evolution of Ti6242 alloy: yield drop phenomenon10.1016/j.msea.2016.07.043 ↗
5. Effects of direct aging on near-alpha Ti–6Al–2Sn–4Zr–2Mo (Ti-6242) titanium alloy fabricated by selective laser melting (SLM)10.1016/j.msea.2020.139533 ↗
6. Cyclic oxidation behaviour of the titanium alloys Ti-6242 and Ti-17 with Ti–Al–Cr–Y coatings at 600 and 700 C in air10.1016/j.surfcoat.2013.02.021 ↗
7. Study of alpha-case depth in Ti-6Al-2Sn-4Zr-2Mo and Ti-6Al-4V
8. Effectiveness of hot deformation and subsequent annealing for β grain refinement of Ti–5Al–5Mo–5V–1Cr–1Fe titanium alloy10.1007/s12598-020-01677-x ↗
9. Simulation of hot compression of Ti–Al alloy10.1016/j.intermet.2006.10.019 ↗
10. Hot deformation behavior and dynamic recrystallization kinetics of AZ61 and AZ61+ Sr magnesium alloys10.1016/j.jma.2016.05.001 ↗
11. Influence of bimodal grain size distribution on the corrosion behavior of friction stir processed biodegradable AZ31 magnesium alloy10.1016/j.jma.2015.12.004 ↗
12. Microstructural characteristics and dynamic recrystallization behavior of β-γ TiAl based alloy during high temperature deformation10.1016/j.intermet.2018.04.002 ↗
13. Hot deformation and dynamic recrystallization behavior of TiAl-based alloy10.1016/j.intermet.2019.106521 ↗
14. Dynamic softening behavior and microstructural characterization of TiAl-based alloy during hot deformation10.1016/j.matchar.2017.05.022 ↗
15. Grain size-dependent mechanical properties of a high-manganese austenitic steel10.1007/s40195-018-0828-z ↗
16. Effect of alloying elements on fracture toughness and ductility in magnesium binary alloys; a review10.2320/matertrans.MT-M2019185 ↗
17. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
18. Characterization of the microstructures and dynamic recrystallization behavior of Ti-6Al-4V titanium alloy through experiments and simulations10.1007/s11665-021-06044-0 ↗
19. The johnson-mehl-avrami-kohnogorov model: a brief review10.1007/BF03185527 ↗
20. Mesoscale modeling of dynamic recrystallization behavior, grain size evolution, dislocation density, processing map characteristic, and room temperature strength of Ti-6Al-4V alloy forged in the (α+ β) region10.1016/j.jallcom.2017.02.285 ↗
21. Experimental study and numerical simulation of dynamic recrystallization behavior of TiAl-based alloy10.1016/j.matdes.2017.02.088 ↗
22. Optimization of hot deformation processing parameters for as-extruded 7005 alloys through the integration of 3D processing maps and FEM numerical simulation10.1016/j.jallcom.2023.169804 ↗
23. Processing maps: a status report10.1361/105994903322692420 ↗
24. Modelling of hot deformation for microstructural control10.1179/imr.1998.43.6.243 ↗
25. Processing maps for hot working of titanium alloys10.1016/S0921-5093(97)00782-X ↗
26. Characterization of hot workability in AA 7050 aluminum alloy using activation energy and 3-D processing map10.1016/j.jmatprotec.2015.05.018 ↗
27. Difference in the hot compressive behavior and processing maps between the as-cast and homogenized Al-Zn-Mg-Cu (7075) alloys10.1016/j.jmst.2016.04.006 ↗
28. Hot deformation behavior of a Sr-modified Al-Si-Mg alloy: constitutive model and processing maps10.1016/S1003-6326(18)64692-8 ↗
29. Hot deformation characterization of as-homogenized Al-Cu-Li X2A66 alloy through processing maps and microstructural evolution10.1016/j.jmst.2019.06.001 ↗
30. Unstable flow during hot deformation of Ti-24AI-20Nb alloy10.1179/mst.1997.13.9.755 ↗
31. The analysis of flow behavior of Ti-6Al-2Sn-4Zr-6Mo alloy based on the processing maps10.1007/s12289-019-01533-z ↗
32. Effects of initial aging time on processing map and microstructures of a nickel-based superalloy10.1016/j.msea.2014.10.031 ↗
33. Hot deformation behavior and processing workability of a Ni-based alloy10.1016/j.jallcom.2018.08.010 ↗
34. Hot workability characteristics of as-cast titanium alloy Ti–6Al–2Zr–1Mo–1V: a study using processing map10.1016/j.msea.2012.11.070 ↗
35. Characterization on hot deformation behavior of Ti-22Al-25Nb alloy using a combination of 3D processing maps and finite element simulation method10.1016/j.jallcom.2018.04.225 ↗
36. Hot formability study of Cr5 alloy steel by integration of FEM and 3D processing maps10.3390/ma15144801 ↗
37. The adiabatic correction factor for deformation heating during the uniaxial compression test10.1361/105994901770344593 ↗
38. A new method for evaluation of friction in bulk metal forming10.1016/j.jmatprotec.2004.03.029 ↗
39. Dynamic recrystallization and texture evolution of Ti-22Al-25Nb alloy during plane-strain compression10.1016/j.jallcom.2018.03.372 ↗
40. Microstructural variations and kinetic behaviors during metadynamic recrystallization in a nickel base superalloy with pre-precipitated δ phase10.1016/j.matdes.2019.107584 ↗
41. Grain size model for continuous dynamic recrystallization of titanium alloy in hot deformation10.1007/s11431-018-9336-9 ↗
42. Prediction of 42CrMo steel flow stress at high temperature and strain rate10.1016/j.mechrescom.2007.10.002 ↗
43. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization10.1016/1359-6454(95)00146-7 ↗
44. Predicting the critical stress for initiation of dynamic recrystallization10.2355/isijinternational.46.1679 ↗
45. Modeling of the dynamic recrystallization kinetics of a continuous casting slab under heavy reduction10.1007/s11661-018-5005-5 ↗
46. The Avrami kinetics of dynamic recrystallization10.1016/j.actamat.2009.02.033 ↗
47. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
48. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗
49. Hot deformation behavior and processing map of a typical Ni-based superalloy10.1016/j.msea.2013.09.049 ↗
50. Ziegler H. Progress in solid mechanics. Ed Sneddon IN y Hill, R, Nueva York (EE UU)(4) 1963.
51. Hot deformation behavior of the post-cogging FGH4096 superalloy with fine equiaxed microstructure10.1016/j.matchar.2011.06.004 ↗
52. Numerical simulation of crack condition in forging products of M50 bearing steel based on processing map theory10.3390/met13050921 ↗
53. Hot deformation characteristics and processing map of a phosphorous modified super austenitic stainless steel10.1016/j.matdes.2016.11.054 ↗
54. Hot deformation and processing maps of X-750 nickel-based superalloy10.1016/j.matdes.2013.03.081 ↗
55. Robust parameters control methodology of microstructure for heavy forgings based on Taguchi method10.1016/j.matdes.2008.08.039 ↗
56. Processing parameters optimization in hot forging of AISI 4340 steel using instability map and reinforcement learning10.1016/j.jmrt.2023.01.106 ↗
57. Effects of deformation temperatures on stress/strain distribution and microstructural evolution of deformed 42CrMo steel10.1016/j.matdes.2008.05.010 ↗
58. Study of the dynamic recrystallization of Ti–6.5 Al–3.5 Mo–1.5 Zr–0.3 Si alloy in β-forging process via Finite Element Method modeling and microstructure characterization10.1016/j.matdes.2010.09.033 ↗
59. Finite-element analysis of microstructure evolution in the cogging of an Alloy 718 ingot10.1016/j.msea.2006.02.415 ↗
60. Improvement of generalization ability of deep CNN via implicit regularization in two-stage training process10.1109/ACCESS.2018.2810849 ↗
61. Improving performance of Devanagari script input-based P300 speller using deep learning
62. Omojokun · 1989
63. Byrd · 1987
64. Modeling of AGS and recrystallized fraction of microalloyed medium carbon steel during hot deformation10.1016/S0921-5093(03)00104-7 ↗
65. The kinetics and cellular automaton modeling of dynamic recrystallization behavior of a medium carbon Cr-Ni-Mo alloyed steel in hot working process10.1016/j.msea.2016.09.056 ↗