Enhancing thermoelectric properties of Ca3Co4O9 ceramics through oscillatory pressure sintering
Source abstract
Abstract
Oscillatory Pressure Sintering (OPS) has been demonstrated to be a favorable manufacturing approach for the control of fine and uniform distribution of grains in various ceramic systems, which can lead to enhanced densification and thus improved physical and mechanical properties. In this study, OPS was utilized to prepare pure Ca3Co4O9 thermoelectric material. The results show that the electrical properties and thermoelectric properties of Ca3Co4O9 prepared by OPS are superior to those of samples sintered by conventional hot pressing (HP) without oscillation. This may be attributed to the better alignment of plate-like grains in the OPS samples, which increase electrical conductivity, and also the higher density of grain boundaries that enhance the phonon scattering and, thus, the reduction of thermal conductivity. This study suggests that a straightforward oscillatory pressure sintering approach can be utilized to obtain high-quality and high-performance thermoelectric materials without the need for doping, templating, or high-temperature sintering.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Key issues in development of thermoelectric power generators: high figure-of-merit materials and their highly conducting interfaces with metallic interconnects10.1016/j.enconman.2016.01.065 ↗
2. History of development of thermoelectric materials for electric power generation and criteria of their quality10.1590/1516-1439.272214 ↗
3. A comprehensive exergy analysis of a prototype Peltier air-cooler; experimental investigation10.1016/j.renene.2018.07.056 ↗
4. Multiscale architectures boosting thermoelectric performance of copper sulfide compound10.1007/s12598-020-01698-6 ↗
5. Constructing n-type Ag2Se/CNTs composites toward synergistically enhanced thermoelectric and mechanical performance10.1016/j.actamat.2021.117502 ↗
6. Large thermoelectric power in NaCo2O4 single crystals10.1103/PhysRevB.56.R12685 ↗
7. Complex oxide materials for potential thermoelectric applications10.1557/mrs2006.46 ↗
8. Misfit-layered cobaltite with an anisotropic giant magnetoresistance: Ca3Co4O910.1103/PhysRevB.62.166 ↗
9. Enhancement of the thermoelectric performance of p-Type layered oxide Ca3Co4O9+δ through heavy doping and metallic nanoinclusions10.1002/adma.201004782 ↗
10. Effect of Ag-doping on crystal structure and high temperature thermoelectric properties of c-axis oriented Ca3Co4O9 thin films by pulsed laser deposition10.1016/j.jallcom.2011.09.008 ↗
11. Thermoelectric transportation in Cu-added Ca3Co4O9 ceramics consolidated by spark plasma sintering10.1016/j.physb.2023.414738 ↗
12. Significant enhancement of the thermoelectric performance in Ca3Co4O9 thermoelectric materials through combined strontium substitution and hot-pressing process10.1016/j.jeurceramsoc.2018.12.049 ↗
13. High-temperature electrical transport behaviors in textured Ca3Co4O9-based polycrystalline ceramics10.1063/1.3086875 ↗
14. Sol-gel synthesis, microstructure, and thermoelectric properties of Ca2.8- xBixDy0.2Co4O9+δ10.1016/j.ceramint.2017.08.191 ↗
15. Terbium ion doping in Ca3Co4O9: a step towards high-performance thermoelectric materials
16. Enhancement of the thermoelectric performance of p-type layered oxide Ca3Co4O9+δ through heavy doping and metallic nanoinclusions10.1002/adma.201004782 ↗
17. High‐temperature electrical transport and thermoelectric power of partially substituted Ca3Co4O9-based ceramics10.1111/j.1551-2916.2006.01370.x ↗
18. Optimizing electrical and thermal transport properties of Ca3Co4O9 based thermoelectric materials by Ag and Fe co-addition
19. Improved high-temperature thermoelectric properties of dual-doped Ca3Co4O910.1021/acsomega.1c05721 ↗
20. Enhanced thermoelectric performance of Ca3Co4O9 ceramics through grain orientation and interface modulation10.1039/D0TA07007F ↗
21. Porous Ca3Co4O9 with enhanced thermoelectric properties derived from Sol-Gel synthesis10.1016/j.jeurceramsoc.2017.04.059 ↗
22. Spark plasma texturing (SPT) of p-type [Ca2CoO3]0.62[CoO2] thermoelectric oxide10.1016/j.jallcom.2016.03.063 ↗
23. Synthesis of Ca3Co4O9 ceramics by polymerized complex and hydrothermal hot-pressing processes and investigation of its thermoelectric properties
24. Ca3Co4O9 ceramics consolidated by SPS process: optimisation of mechanical and thermoelectric properties10.1016/j.materresbull.2010.05.006 ↗
25. An oscillatory pressure sintering of zirconia powder: rapid densification with limited grain growth10.1111/jace.14953 ↗
26. Microstructure and mechanical properties of zirconia ceramics consolidated by a novel oscillatory pressure sintering10.1016/j.ceramint.2015.04.026 ↗
27. Sintering of high-performance silicon nitride ceramics under vibratory pressure10.1111/jace.13486 ↗
28. A novel oscillatory pressure-assisted hot pressing for preparation of high-performance ceramics10.1111/jace.12869 ↗
29. Influence of a mechano-chemical treatment on the synthesis and characteristics of p-type thermoelectric Ca3Co4O9 ceramics10.1016/j.jallcom.2016.06.058 ↗
30. Topotactical reactions with ferrimagnetic oxides having hexagonal crystal structures-I10.1016/0022-1902(59)80070-1 ↗
31. Synthesis of single-phase Ca3Co4O9 ceramics and their processing for a microstructure-enhanced thermoelectric performance10.1016/j.ceramint.2016.01.128 ↗
32. Texture, mechanical and thermoelectric properties of Ca3Co4O9 ceramics10.1016/j.jallcom.2009.10.048 ↗
33. Two-step processing of thermoelectric (Ca0.9Ag0.1)3Co4O9/nano-sized Ag composites with high ZT10.1016/j.jeurceramsoc.2019.04.004 ↗
34. Small-polaron versus band conduction in some transition-metal oxides
35. Synthesis and thermoelectric power factor of (Ca0.95Bi0.05)3Co4O9/Ag composites10.1016/j.matchemphys.2008.08.029 ↗
36. Thermoelectric properties-texture relationship in highly oriented Ca3Co4O9 composites10.1063/1.1785286 ↗
37. High electrical conductivity of layered cobalt oxide Ca3Co4O9 epitaxial films grown by topotactic ion-exchange method10.1063/1.2234277 ↗
38. An oxide single crystal with high thermoelectric performance in air10.1143/JJAP.39.L1127 ↗
39. Thermoelectric properties of highly grain-aligned and densified Co-based oxide ceramics10.1063/1.1542942 ↗
40. Topotactic synthesis of highly-textured thermoelectric cobaltites10.1039/b304295b ↗
41. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
42. Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics10.1126/science.aaa4166 ↗
43. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
44. Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states10.1126/science.1159725 ↗
45. Thermoelectrics with earth abundant elements: low thermal conductivity and high thermopower in doped SnS10.1039/C4TA04462B ↗
46. A new route to fabricate high-performance binderless tungsten carbide: dynamic sinter forging10.1111/jace.19024 ↗
47. Preparation of super-strong ZrO2 ceramics using dynamic hot forging10.1016/j.jeurceramsoc.2022.10.004 ↗
48. Evolution of anisotropy in hierarchical porous ceramics during sinter-forging10.1016/j.jeurceramsoc.2015.12.042 ↗
49. Yang · 2012
50. Tensile stress regions caused by reverse plastic deformation in one-dimensional strain elastic-plastic compressional wave propagation