journal article·2024-03Open access

Effects of La content on microstructure and tribological properties of laser clad Ni60/WC/La2O3 composite coatings on Cr12MoV

Xiaojin Miao, Meiping Wu, Hang Wang, Yongwu Zhao, Chen Cui, Rui He, Dadong Jie

Abstract

The Ni60/WC/La2O3 composite coatings with 0∼2 wt% La2O3 content were prepared on Cr12MoV substrates by laser cladding. The microstructure and tribological properties of the coatings were studied in detail. The results revealed that WC particles were partially dissolved to form new carbides with lower hardness. The dissolution mechanisms were consisted of dissolution-diffusion, diffusion-nucleation, and penetration-dissolution-nucleation. The wear mechanism of C0∼C3 coatings with La2O3 contents of no more than 1.5% was dominated by oxidative wear, while that of C4 coating with a La2O3 content of 2% was dominated by abrasive wear. The best performance of the coatings was obtained at a La2O3 content of 1.5 wt%. The hardness reached 1024.3 HV0.2, which was 3.64 times higher than that of the substrate. And the wear loss was 2.5 mg, which was 88.8% lower than that of the substrate.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Microstructure evolution of laser cladded NiCrBSi coating assisted by an in-situ laser shock wave10.1016/j.jmatprotec.2023.118132 ↗
2. Simplification and experimental investigation of geometrical surface smoothness model for multi-track laser cladding processes10.1016/j.jmapro.2018.11.004 ↗
3. High-efficiency fabrication of Inconel 625 coating for AISI 1045 carbon steel through laser cladding with hot wire: microstructure and wear resistance10.1016/j.jmapro.2023.07.063 ↗
4. Numerical simulation and surface morphology of laser cladding of nickel-based C276 alloy coatings on AerMet100 steel surface10.1016/j.jmrt.2023.10.045 ↗
5. Multi-layer laser cladding analysis and high-temperature oxidative wear behavior of cast iron with a low expansion coefficient10.1016/j.surfcoat.2023.130079 ↗
6. Hot corrosion behaviour of HVOF-sprayed NiCrBSi coatings on Ni- and Fe-based superalloys in Na2SO4–60% V2O5 environment at 900°C10.1016/j.actamat.2005.10.009 ↗
7. Abrasion resistance of Ni-Cr-B-Si coating deposited by laser cladding process10.1016/j.triboint.2019.106002 ↗
8. Microstructural characterization and surface properties of laser clad Ni-ZrB2 coatings on Ti-6Al-4V alloy
9. Repair of spline shaft by laser-cladding coarse TiC reinforced Ni-based coating: process, microstructure and properties10.1016/j.ceramint.2021.07.189 ↗
10. Corrosion and wear behavior of laser cladded Ni–WC coatings10.1016/j.surfcoat.2015.06.039 ↗
11. Effect of WC content on microstructure and mechanical properties of Ni3Al-bonded cermets10.1016/j.ceramint.2015.12.058 ↗
12. Microstructure and phase transformation of WC/Ni60B laser cladding coatings during dry sliding wear10.1016/j.wear.2007.01.132 ↗
13. Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC10.1016/j.wear.2014.12.021 ↗
14. Study of the sliding wear and friction behavior of WC+NiCrBSi laser cladding coatings as a function of actual concentration of WC reinforcement particles in ball-on-disk test10.1007/s11249-016-0734-3 ↗
15. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization10.1016/j.apsusc.2008.04.003 ↗
16. Laser cladding assisted by induction heating of Ni–WC composite enhanced by nano-WC and La2O310.1016/j.ceramint.2014.06.097 ↗
17. Microstructural and mechanical characteristics of laser coatings10.1016/S0257-8972(99)00394-1 ↗
18. Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels10.1016/j.msea.2017.12.003 ↗
19. Effects of La2O3 on the microstructure and property of laser cladding Ni-based ceramic coating10.1016/j.ijleo.2016.11.111 ↗
20. Analysis of the sequentially coupled thermal–mechanical and cladding geometry of a Ni60A-25%WC laser cladding composite coating10.1016/j.optlastec.2023.109595 ↗
21. Effect of the scanning speed of laser cladding on microstructure and mechanical properties of WC/Ni composite coatings10.1007/s12206-022-0115-9 ↗
22. Microstructure evolution and growth control of ceramic particles in wide-band laser clad Ni60/WC composite coatings10.1016/j.matdes.2015.12.121 ↗
23. Preparing WC-Ni coatings with laser cladding technology: a review10.1016/j.mtcomm.2023.106939 ↗
24. The role of La2O3 in direct laser sintering of submicrometre WC–Cop/Cu MMCs10.1088/0022-3727/41/9/095308 ↗
25. Effect of CeO2 on microstructure and corrosive wear behavior of laser-cladded Ni/WC coating
26. Microstructures and properties of Ni/TiC/La2O3 reinforced Al based composite coatings by laser cladding10.1016/j.optlastec.2019.04.002 ↗
27. Rare earth elements modification of laser-clad nickel-based alloy coatings10.1016/S0169-4332(01)00017-4 ↗
28. Wear resistance of diode laser-clad Ni/WC composite coatings at different temperatures10.1016/j.surfcoat.2016.06.081 ↗
29. Laser-based surface modifications of aluminum and its alloys10.1080/10408436.2015.1076716 ↗
30. Rare earth elements modification of laser-clad nickel-based alloy coatings10.1016/S0169-4332(01)00017-4 ↗
31. Laser cladding in-situ carbide particle reinforced Fe-based composite coatings with rare earth oxide addition10.1016/S1002-0721(08)60377-4 ↗
32. Effect of La2O3 on corrosion resistance of laser clad ferrite-based alloy coatings10.1016/j.corsci.2005.01.002 ↗
33. Microstructure and property of Ni/WC/La2O3 coatings by ultrasonic vibration-assisted laser cladding treatment10.1016/j.optlaseng.2019.105848 ↗
34. Effects of CeO2 on microstructure and properties of TiC/Ti2Ni reinforced Ti-based laser cladding composite coatings10.1016/j.optlaseng.2019.03.001 ↗
35. Microstructure, microhardness and corrosion resistance of NiCrBSi coatings under electromagnetic field auxiliary laser cladding10.1016/j.surfcoat.2018.11.034 ↗
36. Research and development of rare-earth cemented carbides10.1016/S0263-4368(01)00018-X ↗
37. A study of Ni-based WC composite coatings by laser induction hybrid rapid cladding with elliptical spot10.1016/j.apsusc.2007.10.062 ↗
38. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization10.1016/j.apsusc.2008.04.003 ↗
39. Effect of RE oxides on the microstructure of the coatings fabricated on titanium alloys by laser alloying technique10.1016/j.scriptamat.2005.11.011 ↗
40. Effect of nano-La2O3 doping on the tribological behavior of laser cladded WC-12Co coating on 65Mn steel under water lubrication condition10.1016/j.triboint.2022.107428 ↗
41. Characteristics of plasma cladding Fe-based alloy coatings with rare earth metal elements10.1016/j.msea.2006.10.142 ↗
42. Effect of WC particles preparation method on microstructure and properties of laser cladded Ni60-WC coatings10.1016/j.jmrt.2022.11.120 ↗
43. Development and characterization of composite Ni–Cr + WC laser cladding10.1016/j.wear.2007.02.023 ↗
44. Microstructure and wear behavior of arc-shaped 40CrNiMo steel after laser hardening10.1016/j.jmrt.2023.04.197 ↗
45. Effect of temperature and load on three-body abrasion of cermets and steel10.1016/j.triboint.2011.06.029 ↗
46. Dry sliding tribological behavior and mechanical properties of Al2024–5wt.%B4C nanocomposite produced by mechanical milling and hot extrusion10.1016/j.matdes.2013.09.024 ↗
47. Large scale multi-parameter analysis of wear of self-mated 100Cr6 steel – a study of the validity of Archard's law10.1016/j.triboint.2021.106945 ↗
48. The third-body approach: a mechanical view of wear10.1016/0043-1648(84)90025-5 ↗
49. Wear resistance of FeCoCrNiMnAlx high-entropy alloy coatings at high temperature10.1016/j.apsusc.2020.145736 ↗
50. The oxidation of metals at high temperature
51. Effects of Cr content on microstructure and tribological properties of laser cladding Ti-based coatings10.1016/j.triboint.2023.108744 ↗
52. Wear behavior of laser cladded WC-reinforced Ni-based coatings under low temperature10.1016/j.triboint.2022.107939 ↗
53. Microstructure and wear resistance performance of Cu–Ni–Mn alloy based hardfacing coatings reinforced by WC particles10.1016/j.jallcom.2015.09.130 ↗
54. Sliding wear behavior of cold-sprayed Ni-WC composite coatings: influence OF WC content
55. A novel intermediate temperature self-lubricating CoCrCu1-xFeNix high entropy alloy fabricated by direct laser cladding
56. Correlation between the characteristics of the mechanically mixed layer and wear behaviour of aluminium, Al-7075 alloy and AlMMCs10.1016/S0043-1648(00)00463-4 ↗