Effect of Ti content on achieving development of mechanical properties and wear resistance of CoCrFeNiMoTix high entropy alloy
Source abstract
Abstract
To achieve the synergy among density, strength, ductility, wear performance and thermal stability, a series of newly developed CoCrFeNiMoTix (x = 2 and 16.666 at. %) high entropy alloys (HEAs) via multiple phases nano crystalline structure were successfully fabricated using mechanical alloying (MA) following by spark plasma sintering (SPS). The results demonstrated that the SPSed Ti2-HEA and Ti16.6-HEA have a multiple phases structure consisting of FCC structure (Ni-type as a major phase), two types of BCC structure (Mo-type and Ti-type), topologically close packed (TCP) phases (laves, sigma (σ) and R phases) and geometrically close packed (GCP) phase (L12 precipitates). The micro hardness, strength and specific strength were increased from 711 HV, 1770 MPa and 197 MPa.Cm3/g for the Ti2-HEA to 817 HV, 1830 MPa and 236 MPa.Cm3/g for the Ti16.6-HEA, respectively, which were affected by more percentages of precipitates, intermetallic and BCC phases. Besides, fracture strain, coefficient friction, wear rate and the surface roughness were decreased from 16%, 0.19, 4.9*10−4 mm3 N−1 m−1 and 54.2 for the Ti2-HEA to 14.5%, 0.17, 2.7*10−4 mm3 N−1 m−1 and 31.6 for the Ti16.6-HEA. The ultimate shear strength (USS) values at 300 °C, 400 °C, 500 °C and 600 °C were increased from 960 MPa, 820 MP, 646 MPa and 24 MPa for the Ti2-HEA to 1180 MPa, 1010 MP, 802 MPa and 94 MPa for the Ti16.6-HEA, respectively. The Ti16.6-HEA illustrated higher thermal stability at all temperatures, where the USS slightly was decreased from 300 °C to 500 °C with a sudden drop at 600 °C.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Effect of laser re-melting on electric current assistive sintered CoCrFeNiAlxTiy high entropy alloys: formation, micro-hardness and wear behaviors10.1016/j.surfcoat.2020.126179 ↗
2. High strength and ductility AlCrFeNiV high entropy alloy with hierarchically heterogeneous microstructure prepared by selective laser melting10.1016/j.jallcom.2019.152196 ↗
3. Corrosion and corrosive wear of AlCrFeCoNi and Co-free AlCrFeNi-Tix (x= 0–1.5) high-entropy alloys in 3.5 wt% NaCl and H2SO4 (pH= 3) solutions10.1016/j.wear.2023.204765 ↗
4. Low-density NiAlFeCrMoV eutectic high-entropy alloys with excellent mechanical and wear properties10.1016/j.jmrt.2022.11.096 ↗
5. Using C to enhance the wear resistance of AlCrFe2Ni4Ti2 high-entropy alloy via replacing brittle phases by in-situ formed TiC in a matrix with improved ductility10.1016/j.wear.2023.204822 ↗
6. Wear and corrosion properties of B4C-added CoCrNiMo high-entropy alloy coatings with in-situ coherent ceramic10.1016/j.matdes.2021.110068 ↗
7. Modified criterions for phase prediction in the multi-component laser-clad coatings and investigations into microstructural evolution/wear resistance of FeCrCoNiAlMox laser-clad coatings10.1016/j.apsusc.2018.08.264 ↗
8. Novel cost-effective Fe-based high entropy alloys with balanced strength and ductility10.1016/j.matdes.2018.11.033 ↗
9. Effect of carbon on recrystallised microstructures and properties of CoCrFeMnNi-type high-entropy alloys10.1016/j.jallcom.2020.156839 ↗
10. Evolution in microstructure, wear, corrosion, and tribocorrosion behavior of Mo-containing high-entropy alloy coatings fabricated by laser cladding10.1016/j.corsci.2021.109727 ↗
11. Studies on the microstructure and properties of AlxCoCrFeNiTi1-x high entropy alloys10.1016/j.jallcom.2018.01.247 ↗
12. Microstructure, wear and oxidation behavior of AlCrFeNiX (X= Cu, Si, Co) high entropy alloys produced by powder metallurgy10.1016/j.vacuum.2021.110143 ↗
13. Review of novel high-entropy protective materials: wear, irradiation, and erosion resistance properties10.3390/e25010073 ↗
14. Towards high entropy alloy with enhanced strength and ductility using domain knowledge constrained active learning10.1016/j.matdes.2022.111186 ↗
15. The synergistic addition of Al, Ti, Mo and W to strengthen the equimolar CoCrFeNi high-entropy alloy via thermal-mechanical processing10.1016/j.jallcom.2022.163774 ↗
16. Effect of hybrid carbonaceous reinforcement on structure, mechanical and wear properties of spark plasma sintered CrCoFeMnNi HEA/GNP+CNT composite10.1016/j.jallcom.2022.166110 ↗
17. Trimodal hierarchical structure in the carbonaceous hybrid (GNPs+ CNTs) reinforced CoCrFeMnNi high entropy alloy to promote strength-ductility synergy
18. Zhang · 2024
19. Microstructural properties and wear resistance of Fe-Cr-Co-Ni-Mo-based high entropy alloy coatings deposited with different coating techniques10.3390/app12063156 ↗
20. Effect of Ti addition on the sliding wear behavior of AlCrFeCoNi high-entropy alloy
21. Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0. 2 high-entropy alloy at room and cryogenic temperatures10.1016/j.actamat.2018.11.049 ↗
22. Simultaneously improving mechanical properties and oxidation resistance of Ti-bearing high-entropy superalloys at intermediate temperature via silicon addition10.1016/j.jmst.2023.01.044 ↗
23. Structure and high temperature mechanical properties of novel non-equiatomic Fe-(Co, Mn)-Cr-Ni-Al-(Ti) high entropy alloys10.1016/j.intermet.2018.09.010 ↗
24. On the effect of Fe in L12 strengthened Al–Co–Cr–Fe–Ni–Ti complex concentrated alloy10.1016/j.mtla.2020.100909 ↗
25. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
26. Effect of μ-precipitates on the microstructure and mechanical properties of non-equiatomic CoCrFeNiMo medium-entropy alloys10.1016/j.jallcom.2018.12.040 ↗
27. Bidirectional improvement of strength and ductility of CoCrFeNiTi (Co40Cr16Fe35Ni8Ti1) high-entropy alloys suitable for coronary stents10.1016/j.jmrt.2022.03.084 ↗
28. Effect of Ti on microstructures and mechanical properties of high entropy alloys based on CoFeMnNi system10.1016/j.msea.2018.09.050 ↗
29. High-strength Al0. 2Co1. 5CrFeNi1. 5Ti high-entropy alloy produced by powder metallurgy and casting: a comparison of microstructures, mechanical and tribological properties10.1016/j.matchar.2019.110046 ↗
30. Microstructures and mechanical properties of FeCoCrNi-Mo High entropy alloys prepared by spark plasma sintering and vacuum hot-pressed sintering
31. A superfine eutectic microstructure and the mechanical properties of CoCrFeNiMox high-entropy alloys10.1557/jmr.2018.177 ↗
32. Synergistic alloying effects on nanoscale precipitation and mechanical properties of ultrahigh-strength steels strengthened by Ni3Ti, Mo-enriched, and Cr-rich co-precipitates10.1016/j.actamat.2021.116788 ↗
33. Microstructure and mechanical properties of nanostructured CoCrFeMoTi high-entropy alloy fabricated by mechanical alloying and spark plasma sintering10.1007/s11665-019-04501-5 ↗
34. Ball milling process variables optimization for high-entropy alloy development using design of experiment and genetic algorithm10.1016/j.powtec.2023.118766 ↗
35. Phase evolution and stability of nanocrystalline CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.jallcom.2018.08.200 ↗
36. Effects of fabrication techniques on the mechanical properties of high entropy alloys: a review10.1016/j.ijlmm.2023.08.001 ↗
37. Effect of sintering parameters on phase evolution, microstructural development and mechanical behavior of Ni46Al12Co18Cr8Fe12Mo4 high entropy alloy synthesized via mechanical alloying and spark plasma sintering10.1016/j.msea.2023.145695 ↗
38. Exploring the mechanical and tribological properties of AlCrFeNiTi high-entropy alloy fabricated by mechanical alloying and spark plasma sintering10.1016/j.vacuum.2023.112611 ↗
39. X-ray analysis of ZnO nanoparticles by Williamson–Hall and size–strain plot methods10.1016/j.solidstatesciences.2010.11.024 ↗
40. Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC AlxCoCrFeNi high entropy alloys10.1016/j.jallcom.2017.08.067 ↗
41. Evaluation of mechanical properties using shear–punch testing10.1016/j.msea.2004.12.048 ↗
42. Effects of elements on the microstructure and mechanical properties of AlCoCrFeNiTi high-entropy alloys10.3390/met13010178 ↗
43. Effect of Iron content on the microstructure evolution, mechanical properties and wear resistance of FeXCoCrNi high-entropy alloy system produced via MA-SPS10.1016/j.jallcom.2021.159410 ↗
44. Effect of Cr, Mo and Ti on the microstructure and Vickers hardness of multi-component systems10.1016/j.jallcom.2014.01.081 ↗
45. Achieving low wear in a μ-phase reinforced high-entropy alloy and associated subsurface microstructure evolution
46. Influence of Mo/Cr ratio on the lamellar microstructure and mechanical properties of as-cast Al0.75CoCrFeNi compositionally complex alloys10.1016/j.jallcom.2021.163183 ↗
47. The effects of secondary elemental Mo or Ti addition in Al0. 3CoCrFeNi high-entropy alloy on age hardening at 700 °C10.1016/j.jallcom.2010.02.032 ↗
48. Effect of Fe addition on microstructure and mechanical properties of as-cast Ti49Ni51 alloy10.3390/ma12193114 ↗
49. CoCrFeNi (W1− xMox) high-entropy alloy coatings with excellent mechanical properties and corrosion resistance prepared by mechanical alloying and hot pressing sintering10.1016/j.matdes.2016.12.076 ↗
50. Cantor-derived medium-entropy alloys: bridging the gap between traditional metallic and high-entropy alloys10.1016/j.jmrt.2022.01.118 ↗
51. Evolution of annealing twins in a hot deformed nickel-based superalloy10.3390/ma15010007 ↗
52. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
53. Punching shear failure behavior of fine-grained ZK60 Mg alloy processed by a novel forward shear normal extrusion process at room and elevated temperatures10.1016/j.engfailanal.2023.107568 ↗
54. Mechanically alloyed high entropy alloys: existing challenges and opportunities10.1016/j.jmrt.2022.01.141 ↗
55. Effect of the geometry and the surface treatment of punching tools on the tool life and wear conditions in the piercing of thick steel plate10.1016/S0924-0136(98)00375-6 ↗
56. Modeling and experimental analysis of shear-slitting of AA6111-T4 aluminum alloy sheet10.3390/ma13143175 ↗
57. Investigation on shearing and local formability of hot-rolled high-strength plates10.1115/1.4033660 ↗
58. Punching test for estimating tensile strength and total elongation of steel sheets10.1007/s00170-021-06898-7 ↗
59. Effect of phase composition on microstructure and wear resistance of (Al16. 80Co20. 74Cr20. 49Fe21. 28Ni20. 70) 99.5 Ti0. 5 high-entropy alloy coatings
60. Determination of structural, tribological, isothermal oxidation and corrosion properties of Al–Co–Cr–Fe–Ni–Ti–Cu high-entropy alloy10.1016/j.vacuum.2021.110072 ↗
61. Benefits of passive element Ti to the resistance of AlCrFeCoNi high-entropy alloy to corrosion and corrosive wear
62. Microstructure and tribological property of CoCrFeMoNi High entropy alloy treated by ion sulfurization10.1016/j.jmrt.2019.12.090 ↗
63. Fabrication and wear behavior of TiC reinforced FeCoCrAlCu-based high entropy alloy coatings by laser surface alloying10.1016/j.matchemphys.2020.123571 ↗
64. Microstructural and tribological characteristics of in situ induced chrome carbide strengthened CoCrFeMnNi high-entropy alloys10.1007/s11665-020-04872-0 ↗
65. Fabrication and properties of nanocrystalline Co0. 5FeNiCrTi0. 5 high entropy alloy by MA–SPS technique10.1016/j.matdes.2012.08.048 ↗
66. High-strength ultrafine-grained CoCrFeNiNb high-entropy alloy prepared by mechanical alloying: properties and strengthening mechanism10.1016/j.jallcom.2020.155308 ↗
67. High-temperature tensile strength of Al 10 Co 25 Cr 8 Fe 15 Ni 36 Ti 6 compositionally complex alloy (high-entropy alloy)10.1007/s11837-015-1484-7 ↗
68. Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2 (Ni, Co, Fe, Cr) 14 compositions10.1016/j.actamat.2018.01.050 ↗
69. A novel FeCrNiAlTi-based high entropy alloy strengthened by refined grains10.1016/j.jallcom.2020.153729 ↗
70. A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures10.1016/j.scriptamat.2021.114132 ↗
71. FeCoCrNiMo high-entropy alloys prepared by powder metallurgy processing for diamond tool applications10.1080/00325899.2018.1429044 ↗
72. Microstructure, phase evolution, and chemical behavior of crcufenitialx high entropy alloys processed by mechanical alloying10.3390/e25020256 ↗
73. Tribological properties of high-entropy alloys under dry conditions for a wide temperature-A review10.3390/ma14195814 ↗