journal article·2024-05Open access

Review on manufacturability and strengthening mechanisms of particulate reinforced Mg composites

Yu-Ze Zhang, Bai-Xin Dong, Cheng-Gang Wang, Bai-Chuan Yan, Hong-Yu Yang, Feng Qiu, Shi-Li Shu, Qi-Chuan Jiang

Abstract

The further development of lightweight and energy-saving engineering materials is a great challenge for scientists in the 21st century. Magnesium and its composites, as the metal materials with the lowest density among metal structural materials, have good thermal conductivity, good dimensional stability, high specific strength, good biocompatibility, which can meet the requirements of energy saving, emission reduction, environmental protection. In recent years, magnesium and its composites have found the major applications in various fields such as aerospace, automotive, electronics and medical. However, the fabrication of magnesium matrix composites is difficult, and the deformation behaviors and strengthening mechanisms of particulate reinforced magnesium matrix composites have unique characteristics. This article reviews the recent research progress of the magnesium matrix composites, including different fabrication methods and strengthening mechanisms. According to the classification of solidification rate, the advantages and disadvantages of various techniques used to fabricate magnesium matrix composites were introduced. The traditional fabrication methods and novel fabrication techniques were discussed. The influence mechanisms of particulates on solidification microstructures, recrystallization behaviors, texture strength and twin behaviors of magnesium matrix composites during solidification and extrusion were summarized, and the roles of particulates in solidification and extrusion of magnesium matrix composites was analyzed. The strengthening mechanisms of particulates on the mechanical properties, corrosion resistance, fatigue resistance and creep resistance of magnesium matrix composites were revealed. Finally, the development prospect and research direction of magnesium matrix composites were prospected. It is hoped that this paper can provide a reference for the further development of magnesium matrix composites.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Comprehensive study of magnesium based metal matrix composite10.1016/j.matpr.2021.04.062 ↗
2. Lightweight composite materials for automotive-a review
3. Recent development and applications of magnesium alloys in the hyundai and kia motors corporation10.2320/matertrans.MC200731 ↗
4. Advanced aluminium matrix composites: the critical need of automotive and aerospace engineering fields
5. Nontraditional energy-assisted mechanical machining of difficult-to-cut materials and components in aerospace community: a comparative analysis10.1088/2631-7990/ad16d6 ↗
6. Research on microstructures of sub-rapidly solidified AZ61 magnesium alloy10.1016/j.matchar.2008.12.004 ↗
7. Cho · 2016 · 110
8. Review on magnesium and magnesium-based alloys as biomaterials for bone immobilization10.1016/j.jmrt.2023.02.037 ↗
9. Recent advances in surface endothelialization of the magnesium alloy stent materials10.1016/j.jma.2022.12.017 ↗
10. Influence of heat treatment on microstructure, mechanical and corrosion behavior of WE43 alloy fabricated by laser-beam powder bed fusion10.1088/2631-7990/acfad5 ↗
11. Magnesium alloys development towards the 21st century
12. Magnesium: properties—applications—potential10.1016/S0921-5093(00)01351-4 ↗
13. Effect of multi-pass continuous screw twist extrusion process on microstructure evolution, texture, and mechanical properties of AZ31 magnesium alloy
14. Electrochemical corrosion behavior of AZ91D magnesium alloy-graphene nanoplatelets composites in simulated body fluids
15. Corrosion behavior of AZ31 magnesium alloy with calcium addition10.1016/j.corsci.2022.110205 ↗
16. Optimization on microstructure, mechanical properties and damping capacities of duplex structured Mg-8Li-4Zn-1Mn alloys10.1007/s12613-022-2572-7 ↗
17. Surface metal-matrix composites based on AZ91 magnesium alloy via friction stir processing: a review10.1007/s12613-022-2589-y ↗
18. Overcome strength and toughness trade-off in Cu-decorated carbon nanotubes reinforced magnesium matrix composites by chemical reaction interface and grain refinement10.1016/j.msea.2023.145195 ↗
19. Influence of SiC nanoparticle contents on microstructural evolution and mechanical behavior of AZ91D magnesium matrix composites synthesised through a combination of a master pellet feeding technique and stir casting assisted by ultrasonic vibration
20. Synthesis and mechanical behavior of in-situ porous Ti particle reinforced Mg-Cu-Gd-Ag bulk metallic glass matrix composite10.1016/j.jallcom.2023.171842 ↗
21. Preparation of graphene reinforced AZ31B magnesium-based composites by stirring casting10.1016/j.vacuum.2021.110281 ↗
22. Investigation into machining performance of microstructurally engineered in-situ particle reinforced magnesium matrix composite10.1016/j.jma.2022.10.015 ↗
23. Compression behaviour Mg-Zn-xSr-HA hybrid nanocomposites through powder metallurgy method10.1016/j.matpr.2022.12.133 ↗
24. Simultaneously enhanced mechanical properties and electromagnetic interference shielding performance of a graphene nanosheets (GNSs) reinforced magnesium matrix composite by GNSs induced laminated structure10.1016/j.jallcom.2021.162847 ↗
25. Simultaneously improved modulus, thermal expansion coefficient and wear resistance of a Mg–6Zn–1Gd–0.3 Ca matrix composite by adding high volume fraction SiC particles10.1016/j.jmrt.2023.08.143 ↗
26. Mechanical, biodegradability and biocompatibility behaviour of seashell and ZrO2 particulates reinforced AZ31 Mg composites10.1016/j.ceramint.2024.02.040 ↗
27. Corrosion and corrosion-fatigue behavior of magnesium metal matrix composites for bio-implant applications: a review10.1016/j.jma.2023.04.010 ↗
28. Revealing the tensile creep behavior and mechanism of SiC particles reinforced AZ31 composite fabricated by liquid metallurgy10.1016/j.msea.2022.144325 ↗
29. Strength-plasticity-matched (GNPs+ GFs)/Mg–3Zn-0.1Y magnesium matrix composites with high modulus through liquid-phase dispersion and multistep deformation10.1016/j.coco.2023.101774 ↗
30. Processing, mechanical, corrosion, and wear behavior of ZnO-reinforced Mg and Mg–Zr matrix composites for bioimplant applications10.1016/j.matchemphys.2024.128884 ↗
31. Development of low-alloyed Mg–Zn–Ca–Sn–Mn alloy with high strength-ductility synergy by sub-rapid solidification and hot rolling10.1016/j.jallcom.2020.157317 ↗
32. Effect of cooling rate and Mg addition on the structural evaluation of rapidly solidified Al-20wt% Cu-12wt% Fe alloy10.1016/j.matchar.2016.09.030 ↗
33. Precipitation/recovery kinetics and mechanical properties in rapidly solidified AA6005 AlMgSi sheets via thin strip casting: effects of casting cooling rate and thermomechanical processing route10.1016/j.matchar.2023.113400 ↗
34. Effects of ZnO addition on the microstructure/corrosion, wear and mechanical properties of sintered Mg-Al matrix composites10.1016/j.jallcom.2023.170500 ↗
35. Effect of whisker alignment on microstructure, mechanical and thermal properties of Mg-SiCw/Cu composite fabricated by a combination of casting and severe plastic deformation (SPD)10.1016/j.jma.2022.11.004 ↗
36. Conventional stir casting versus ultrasonic assisted stir casting process: mechanical and physical characteristics of AMCs10.1016/j.jallcom.2019.07.076 ↗
37. Structure-property correlation in magnesium nanocomposites synthesized by disintegrated melt deposition technique
38. Realizing impressive superplasticity in a low-alloyed Mg-Zn-Ca-Al-Mn alloy: the roles of grain boundary segregation and dense β-Mn particles10.1016/j.jma.2023.05.014 ↗
39. Dynamic precipitation and deformation behaviors of a bimodal-grained WE43 alloy with enhanced mechanical properties10.1016/j.ijplas.2023.103682 ↗
40. Additive manufacturing of titanium alloys via selective laser melting: fabrication, microstructure, post-processing, performance and prospect10.1016/j.ijrmhm.2023.106110 ↗
41. 2023. 3D/4D printed bio-piezoelectric smart scaffolds for next-generation bone tissue engineering
42. Advances in 3D printing scaffolds for peripheral nerve and spinal cord injury repair
43. Enhanced strength-ductility synergy in a wire and arc additively manufactured Mg alloy via tuning interlayer dwell time10.1016/j.jma.2023.01.015 ↗
44. Additive manufacturing of promising heterostructure for biomedical applications
45. Development of Mg based biomaterial with improved mechanical and degradation properties using powder metallurgy10.1016/j.jma.2020.02.011 ↗
46. Conventional stir casting versus ultrasonic assisted stir casting process: mechanical and physical characteristics of AMCs10.1016/j.jallcom.2019.07.076 ↗
47. Structure-property correlation in magnesium nanocomposites synthesized by disintegrated melt deposition technique
48. Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: a review10.1016/j.ijmachtools.2018.01.003 ↗
49. Microstructure and properties of multi-layer and multi-bead parts of 316 stainless steel fabricated by laser-arc hybrid additive manufacturing10.1016/j.optlastec.2023.109903 ↗
50. Friction stir processing of magnesium alloys: a review10.1007/s40195-019-00971-7 ↗
51. Microstructure and mechanical properties of the ultra-fine grained ZK60 reinforced with low content of nano-diamond by powder metallurgy10.1016/j.jallcom.2018.11.110 ↗
52. Effect of ball milling the hybrid reinforcements on the microstructure and mechanical properties of Mg–(Ti+ n-Al2O3) composites10.1016/j.jallcom.2011.04.083 ↗
53. Achieving high strength and ductility in a heterogeneous bimodal grain structured TiC/AZ61 magnesium nanocomposites via powder metallurgy10.1016/j.msea.2022.144344 ↗
54. Influence of Ti-6Al-4V particles on the interfacial microstructure and strength-ductility synergetic mechanism of AZ91 magnesium alloy10.1016/j.matchar.2022.112154 ↗
55. Effect of SiC nanoparticle content and milling time on the microstructural characteristics and properties of Mg-SiC nanocomposites synthesized with powder metallurgy incorporating high-energy ball milling10.1016/j.ceramint.2020.07.173 ↗
56. Critical review of Mg matrix composite for bio-implants through powder metallurgy10.1016/j.matpr.2022.03.036 ↗
57. Significant strengthening of copper-based composites using boron nitride nanotubes10.1007/s12613-023-2633-6 ↗
58. Understanding the influencing mechanism of CNTs on the microstructure and mechanical properties of semi-solid stir casting Al-Cu-Mg alloys10.1016/j.jmrt.2022.04.087 ↗
59. Recent progress in Mg-Li matrix composites10.1016/S1003-6326(18)64909-X ↗
60. Comparative investigation of microstructure and high-temperature oxidation resistance of high-velocity oxy-fuel sprayed CoNiCrAlY/nano-Al2O3 composite coatings using satellited powders10.1007/s12613-023-2630-9 ↗
61. Microstructure evolution and performance improvement of powder metallurgy stainless steel with P addition
62. The oxidation behavior and reaction thermodynamics and kinetics of the Mg-X (X= Ca/Gd/Y) binary alloys10.1016/j.corsci.2023.111609 ↗
63. Titanium particulate reinforced AZ31 magnesium matrix composites with improved ductility prepared using friction stir processing10.1016/j.msea.2019.138793 ↗
64. Investigation on mechanical properties of AZ31B magnesium alloy manufactured by stir casting process10.1016/j.jmbbm.2022.105641 ↗
65. Microstructure and strengthening mechanism of bimodal size particle reinforced magnesium matrix composite10.1016/j.compositesa.2012.03.007 ↗
66. Influence of SiC nanoparticle contents on microstructural evolution and mechanical behavior of AZ91D magnesium matrix composites synthesised through a combination of a master pellet feeding technique and stir casting assisted by ultrasonic vibration
67. Grain refinement by AlN particles in Mg–Al based alloys10.1016/j.jallcom.2008.12.029 ↗
68. Microstructures and the improved mechanical properties of AZ91 alloy by incorporating Ti-6Al-4V particles10.1016/j.jmrt.2023.09.091 ↗
69. Understanding the anti-wear mechanism of SiCp/WE43 magnesium matrix composite10.1016/j.vacuum.2019.109049 ↗
70. Preparation of graphene reinforced AZ31B magnesium-based composites by stirring casting10.1016/j.vacuum.2021.110281 ↗
71. Microstructure and mechanical properties of Mg/SiC and AZ80/SiC nano-composites fabricated through stir casting method10.1016/j.msea.2014.11.050 ↗
72. Introduction to magnesium alloy processing technology and development of low-cost stir casting process for magnesium alloy and its composites10.1016/j.jma.2018.05.006 ↗
73. A review on the production of metal matrix composites through stir casting–Furnace design, properties, challenges, and research opportunities10.1016/j.jmapro.2019.04.017 ↗
74. Morphological evolution of semi-solid Mg2Si/AM60 magnesium matrix composite produced by ultrasonic vibration process10.1016/j.jmatprotec.2013.11.012 ↗
75. A new semi-solid casting technique for fabricating SiC-reinforced Mg alloys matrix composites10.1016/j.compositesb.2016.02.019 ↗
76. Achieving strength-thermal conductivity synergy in Mg bulk system via introducing oriented graphite flakes into Mg-Zn-Ca alloy10.1016/j.coco.2022.101451 ↗
77. Microstructure and mechanical properties of SiC particle reinforced magnesium composites processed by injection molding10.1016/j.msea.2011.04.088 ↗
78. Microstructure and tensile properties of micro-SiC particles reinforced magnesium matrix composites produced by semisolid stirring assisted ultrasonic vibration
79. High-strength, high-toughness SiCp reinforced Mg matrix composites manufactured by semisolid injection molding10.1016/j.jmrt.2023.08.142 ↗
80. Role of extrinsic and intrinsic toughening mechanisms in graphene nanosheets reinforced magnesium matrix layered composites10.1016/j.msea.2023.145619 ↗
81. Effect of tip content on the work hardening and softening behavior of Mg–Zn–Ca alloy
82. Effect of injection speed on microstructure of AZ91D magnesium alloy in semi-solid injection process10.2320/matertrans.F-M2012811 ↗
83. Microstructure and mechanical properties of semi-solid die casting Mg–5Zn–2Gd–0.6 Zr alloy
84. Solid fraction analysis with DSC in semi-solid metal processing10.1016/j.jallcom.2009.06.165 ↗
85. Structure-property correlation in magnesium nanocomposites synthesized by disintegrated melt deposition technique10.1016/j.matpr.2018.05.120 ↗
86. Properties and deformation behaviour of Mg–Y2O3 nanocomposites10.1016/j.actamat.2007.05.032 ↗
87. Development of high-performance quaternary LPSO Mg–Y–Zn–Al alloys by disintegrated melt deposition technique10.1016/j.matdes.2015.06.041 ↗
88. Al2O3 nanoparticle addition to concentrated magnesium alloy AZ81: enhanced ductility10.1016/j.jallcom.2012.08.020 ↗
89. Hot working mechanisms in DMD-processed versus cast AZ31–1 wt% Ca alloy10.1016/j.msea.2015.07.074 ↗
90. Thermomechanical processing of AZ31-3Ca alloy prepared by disintegrated melt deposition (DMD)10.3390/cryst10080647 ↗
91. Enhancing the physical, thermal, and mechanical responses of a Mg/2wt.% CeO2 nanocomposite using deep cryogenic treatment10.3390/met13040660 ↗
92. Tribological characterisation of magnesium matrix nanocomposites: a review10.1177/16878140211009025 ↗
93. The process planning for additive and subtractive hybrid manufacturing of powder bed fusion (PBF) process10.1016/j.matdes.2023.111732 ↗
94. Abnormal interfacial bonding mechanisms of multi-material additive-manufactured tungsten–stainless steel sandwich structure10.1088/2631-7990/ac5f10 ↗
95. Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc-and Zr-modified Al-Mg alloys10.1016/j.matdes.2017.11.053 ↗
96. Investigation of Ti-13Nb-13Zr alloy powder properties and development of the L-PBF process
97. Processing, microstructure, and mechanical behavior of AZ31 magnesium alloy fabricated by electron beam additive manufacturing
98. Microstructure and high temperature properties of tungsten processed via electron beam melting additive manufacturing10.1016/j.ijrmhm.2023.106148 ↗
99. Additive manufacturing of ZK60 magnesium alloy by selective laser melting: parameter optimization, microstructure and biodegradability
100. Additive manufacturing of titanium alloys via selective laser melting: fabrication, microstructure, post-processing, performance and prospect