journal article·2024-05Open access

Mechanical properties and energy absorption capabilities of plate-based AlSi10Mg metamaterials produced by laser powder bed fusion

Chaofeng Gao, Jiahao Shi, Huaping Tang, Hao Tang, Zhiyu Xiao, Yunjie Bi, Zhongqiang Liu, Jeremy Heng Rao

Abstract

Plate-based lattice structures are an emerging category of mechanical metamaterials with exceptional mechanical performance. In this work, plate-based SCFCC metamaterials of AlSi10Mg with various relative densities are fabricated by laser powder bed fusion (LPBF). Circular holes are strategically designed and placed at the center of each non-load-bearing face for residual powder removal. Quasi-static compression experiments and numerical simulations are performed to investigate their mechanical performance and deformation mechanisms. Results indicate that the elastic modulus of SCFCC metamaterials decreases by 3.5% with the presence of 0.9 mm diameter holes, while increasing the hole size shows negligible impact on the elastic modulus. The novel plate-based SCFCC structure exhibits superior mechanical properties and enhanced energy absorption capacity concerning conventional high-stiffness truss-based and shell-based counterparts. The improvement, at the relative density of 0.2, can be observed in terms of elastic modulus (around 50%), peak compressive strength (around 300%), energy absorption capacity (around 400% or 200%). When increasing the relative density from 0.2 to 0.5, plate-based SCFCC metamaterial still maintains superior mechanical performance while the gaps between SCFCC and its counterparts narrow down gradually owing to the loss of structural features. Moreover, mechanical characteristics and coefficients of three Gibson and Ashby analytical equations are determined. This work proposes a novel type of plate-based structure with both exceptional mechanical performance and good additive manufacturability, which opens a new avenue for the design of lightweight mechanical metamaterials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. SLM lattice structures: properties, performance, applications and challenges10.1016/j.matdes.2019.108137 ↗
2. Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: current status and outstanding challenges10.1016/j.cossms.2018.05.002 ↗
3. Optical negative-index metamaterials10.1038/nphoton.2006.49 ↗
4. Double-negative acoustic metamaterial
5. Relating pore shape to the non-linear response of periodic elastomeric structures10.1016/j.jmps.2013.11.014 ↗
6. 3D soft metamaterials with negative Poisson's ratio10.1002/adma.201301986 ↗
7. Programmable multistable perforated shellular
8. Heat flux manipulation with engineered thermal materials10.1103/PhysRevLett.108.214303 ↗
9. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
10. Wang · The cell size reduction of aluminum foam with dynamic gas injection based on the improved foamable melt · 2017 · 527 · 123
11. Optimization of cellular structure of aluminum foams produced by powder metallurgy method10.1016/j.matlet.2017.12.144 ↗
12. Mechanical metamaterials associated with stiffness, rigidity and compressibility: a brief review10.1016/j.pmatsci.2017.12.003 ↗
13. Mechanical metamaterials: smaller and stronger10.1038/nmat4591 ↗
14. Mechanical metamaterials and their engineering applications10.1002/adem.201800864 ↗
15. Multi-lattice inner structures for high-strength and light-weight in metal selective laser melting process10.1016/j.matdes.2019.107786 ↗
16. Effects of heat treatment on microstructure and mechanical properties of selective laser melted Ti-6Al-4V lattice materials10.1016/j.ijmecsci.2020.106042 ↗
17. A comparative investigation on the mechanical properties and cytotoxicity of Cubic, Octet, and TPMS gyroid structures fabricated by selective laser melting of stainless steel 316L10.1016/j.jmbbm.2022.105151 ↗
18. Experimental and analytical investigation of mechanical behavior of laser-sintered diamond-lattice structures
19. Porous tantalum scaffolds: fabrication, structure, properties, and orthopedic applications10.1016/j.matdes.2021.110095 ↗
20. Foam topology: bending versus stretching dominated architectures10.1016/S1359-6454(00)00379-7 ↗
21. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗
22. Plate-nanolattices at the theoretical limit of stiffness and strength10.1038/s41467-020-15434-2 ↗
23. A variational approach to the theory of the elastic behaviour of multiphase materials10.1016/0022-5096(63)90060-7 ↗
24. Continuous graded Gyroid cellular structures fabricated by selective laser melting: design, manufacturing and mechanical properties10.1016/j.matdes.2018.12.007 ↗
25. Compressive mechanical properties and energy absorption characteristics of SLM fabricated Ti6Al4V triply periodic minimal surface cellular structures10.1016/j.mechmat.2022.104241 ↗
26. Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading
27. Triply periodic minimal surface (TPMS) porous structures: from multi-scale design, precise additive manufacturing to multidisciplinary applications10.1088/2631-7990/ac5be6 ↗
28. Manufacturability, mechanical properties, mass-transport properties and biocompatibility of triply periodic minimal surface (TPMS) porous scaffolds fabricated by selective laser melting10.1016/j.matdes.2020.109034 ↗
29. Mechanical properties of three-dimensional functionally graded triply periodic minimum surface structures10.1016/j.ijmecsci.2023.108118 ↗
30. Mechanical and biological properties of enhanced porous scaffolds based on triply periodic minimal surfaces10.1016/j.matdes.2022.110803 ↗
31. Mechanical responses of sheet-based gyroid-type triply periodic minimal surface lattice structures fabricated using selective laser melting10.1016/j.matdes.2022.110407 ↗
32. Compression–compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting10.1016/j.actamat.2019.09.042 ↗
33. Response of an aluminium Schwarz triply periodic minimal surface lattice structure under constant amplitude and random fatigue10.1016/j.ijfatigue.2022.107020 ↗
34. Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness10.1038/nature21075 ↗
35. 3D plate-lattices: an emerging class of low-density metamaterial exhibiting optimal isotropic stiffness
36. Energy absorption characteristics of additively manufactured plate-lattices under low- velocity impact loading10.1016/j.ijimpeng.2020.103768 ↗
37. Impact behavior of nanoengineered, 3D printed plate-lattices10.1016/j.matdes.2021.109516 ↗
38. Additively-manufactured anisotropic and isotropic 3D plate-lattice materials for enhanced mechanical performance: simulations & experiments10.1016/j.actamat.2020.08.063 ↗
39. Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: simulations & experiments10.1016/j.jmps.2018.08.022 ↗
40. Additive manufactured semi-plate lattice materials with high stiffness, strength and toughness
41. Compression experiment and numerical evaluation on mechanical responses of the lattice structures with stochastic geometric defects originated from additive-manufacturing10.1016/j.compositesb.2020.108030 ↗
42. Effect of heat treatment on AlSi10Mg lattice structure manufactured by selective laser melting: microstructure evolution and compression properties10.1016/j.matchar.2022.111882 ↗
43. The effect of topology on the quasi-static and dynamic behaviour of SLM AlSi10Mg lattice structures
44. Mechanical behaviour of AlSi10Mg lattice structures manufactured by the Selective Laser Melting (SLM)
45. Crushing behavior of multi-layer metal lattice panel fabricated by selective laser melting10.1016/j.ijmecsci.2018.07.029 ↗
46. Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
47. Mechanical design and energy absorption performances of novel dual scale hybrid plate-lattice mechanical metamaterials10.1016/j.eml.2020.100918 ↗
48. Si/SiC ceramic lattices with a triply periodic minimal surface structure prepared by laser powder bed fusion
49. Gibson · 1999
50. Ashby · 2000
51. Compressive strain at the onset of densification of cellular solids10.1177/0021955X06063519 ↗
52. 3D‐Printed mechanical metamaterials with high energy absorption10.1002/admt.201800419 ↗