Experimental and MD simulation study of surface residual stress and surface quality of SiCp/Al in pulsed laser-ultrasonic assisted grinding
Source abstract
Abstract
The utilisation of aluminium-based silicon carbide composites (SiCp/Al) is on the rise. However, during the grinding process, where abrasive particles compel SiC particles into the aluminium matrix, stress concentration occurs near the interface between the two phases. This phenomenon results in adverse surface deformation accompanied by residual compressive stress (RCS). Consequently, a pulsed laser-ultrasonic-assisted grinding method (PL-UAG) has been proposed. The effectiveness of the method is verified through grinding experiments. Moreover, the influence process of the thermal effect of pulsed laser and the evolution mechanism of microscopic RS near the SiCp/Al two-phase interface are revealed through molecular dynamics simulation. The experimental results show that the surface RCS of SiCp/Al gradually decreases and transforms into residual tensile stress (RTS) with the increase of laser power. The RCS increases with the grinding depth. The RCS is reduced to 17 Mpa and the surface roughness Sa value is reduced to 0.110 μm with the laser power is 40 W and the grinding depth is 1 μm. The simulation results show that the energy dissipation process of pulsed laser helps to reduce thermal deformation and damage. The laser-induced thermal effect reduces the deformation of the aluminium matrix caused by particle extrusion and inhibits the formation and slip of dislocations in the aluminium matrix. In addition, the ultrasonic shock effect effectively weakens the RTS generated by the laser.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A comprehensive review of advances in ultrasonic vibration machining on SiCp/Al composites10.1016/j.jmrt.2023.04.245 ↗
2. Review of multi-dimensional ultrasonic vibration machining for aeronautical hard-to-cut materials10.1007/s00170-022-10416-8 ↗
3. Simultaneously improved strength and ductility in Al matrix composite with heterogeneous structures under impact loadings10.1016/j.jmrt.2022.12.187 ↗
4. Towards the understanding the effect of surface integrity on the fatigue performance of silicon carbide particle reinforced Almatrix composites10.1016/j.jmapro.2021.11.029 ↗
5. Long range internal stresses in single-phase crystalline materials10.1016/j.ijplas.2012.10.003 ↗
6. Enhanced multiscale modeling of macroscopic and microscopic residual stresses evolution during multi-thermo-mechanical processes10.1016/j.matdes.2016.11.070 ↗
7. A grinding force predictive model and experimental validation for the laser-assisted grinding (LAG) process of zirconia ceramic10.1016/j.jmatprotec.2022.117492 ↗
8. Key technologies for laser-assisted precision grinding of 3D C/C-SiC composites10.1016/j.jeurceramsoc.2023.03.048 ↗
9. Investigation of surface integrity in laser-assisted machining of nickel based superalloy10.1016/j.matdes.2020.108851 ↗
10. Investigations on continuous-wave laser and pulsed laser induced controllable ablation of SiCf/SiC composites
11. Laser-assisted grinding of silicon nitride by picosecond laser10.1007/s00170-017-0440-9 ↗
12. Enhancing machinability of Ti6Al4V by ultrashort-pulse laser-induced modification assisted grinding10.1007/s00170-023-11073-1 ↗
13. Residual stresses in ultrasonic vibration assistance turning cemented carbide
14. Mechanism and feasibility of ultrasonic-assisted milling to improve the machined surface quality of 2D C/SiC compositesf10.1016/j.ceramint.2020.03.047 ↗
15. Multi-dimensional ultrasonic-assisted belt grinding on the surface integrity of Inconel 71810.1016/j.jmapro.2023.08.005 ↗
16. Finite element analysis and experimental study on the cutting mechanism of SiCp/Al composites by ultrasonic vibration-assisted cutting10.1016/j.ceramint.2022.08.142 ↗
17. Experimental and FEM study of cutting mechanism and damage behavior of ceramic particles in orthogonal cutting SiCp/Al composites10.1016/j.ceramint.2020.11.072 ↗
18. Microscopic residual stress evolution at the SiCp/Al interface during nanoindentation via molecular dynamics simulation
19. Study of nanoscale wear of SiCp/Al nanocomposites using molecular dynamics simulations
20. Tensile deformation of nanocrystalline Al-matrix composites: effects of the SiC particle and graphene10.1016/j.commatsci.2018.09.050 ↗
21. A molecular dynamics investigation into the mechanisms of material removal and subsurface damage of nanoscale high speed laser-assisted machining10.1080/08927022.2016.1228106 ↗
22. Molecular dynamics simulation of laser assisted grinding of GaN crystals10.1016/j.ijmecsci.2022.107856 ↗
23. Surface formation in laser-assisted grinding high-strength alloys10.1016/j.ijmachtools.2023.104002 ↗
24. Analysis of microscopic deformation mechanism of SiCp/Al composites induced by ultrasonic vibration nanoindentation10.1016/j.jclepro.2023.140073 ↗
25. Molecular dynamics simulation on crystal defects of single-crystal silicon during elliptical vibration cutting10.1016/j.ijmecsci.2022.108072 ↗
26. Surface/subsurface formation mechanism of tungsten during ultrasonic elliptical vibration cutting
27. Surface morphology improvement and residual stress distribution of SiCp/Al composites using high-power fiber laser-CNC milling cooperative machining strategy10.1016/j.jmapro.2023.10.068 ↗
28. Molecular dynamics simulation of laser assisted grinding of GaN crystals10.1016/j.ijmecsci.2022.107856 ↗
29. Material removal mechanism in and experiments of electrorheological polishing of foldable intraocular lenses at low temperatures10.1016/j.jmapro.2023.06.047 ↗
30. Study of nanoscale wear of SiCp/Al nanocomposites using molecular dynamics simulations10.1007/s11249-021-01414-0 ↗
31. Phase transformation Prediction considering crystallographic orientation in microgrinding multiphase material10.1115/1.4047492 ↗
32. Optimized interatomic potential for study of structure and phase transitions in Si-Au and Si-Al systems10.1016/j.commatsci.2020.109891 ↗
33. Geometrical aspects of nanofillers influence the tribological performance of Al-based nanocomposites
34. Electron-ion coupling effects on radiation damage in cubic silicon carbide10.1088/0953-8984/25/23/235402 ↗
35. Electron-phonon coupling and electron heat capacity of metals under conditions of strong electron-phonon nonequilibrium10.1103/PhysRevB.77.075133 ↗
36. Removal of SiC at atomic and close-to-atomic scale by nanosecond ultraviolet laser10.1016/j.optlastec.2022.108863 ↗
37. Growth of highly oriented graphite by ultraviolet nanosecond pulsed laser ablation of monocrystalline diamond10.1016/j.apsusc.2021.151995 ↗
38. Effect of laser spot overlap ratio on surface characteristics and adhesive bonding strength of an Al alloy processed by nanosecond pulsed laser10.1016/j.jmapro.2020.12.055 ↗
39. Finite element analysis of ultrasonic assisted milling of SiCp/Al composites10.1007/s00170-019-04542-z ↗
40. Effect of crystallographic orientation on residual stress induced in micro-grinding10.1007/s00170-020-06329-z ↗
41. Mechanical response and microstructure evolution of SiC particle-reinforced Al-MMCs under ultrasonic loading