journal article·2024-09Open access

Wire-arc additive manufacturing of Mg-Gd-Y-Zn-Zr alloy: Microstructure and mechanical properties

Ce Zhang, Ruifeng Ju, Yunlong Li, Zhanyong Zhao, Liqing Wang, Kai Ma, Dongdong Zhang, Zhen Zhang, Peikang Bai

Abstract

Mg-Gd-Y-Zn-Zr alloy is an essential high strength weight ratio material in the aerospace field. It has been fabricated gradually using wire-arc additive manufacturing (WAAM), a key integrated preparation technology for large-scale parts. In this investigation, a Mg-9.4Gd-3.3Y-1.75Zn-0.38Zr (wt.%) alloy was prepared by WAAM based in the cold metal transfer (CMT) process. Investigations were conducted into the microstructural evolution and mechanical properties during the solution and aging heat treatment. With an average grain size of 18.30 ± 9.89 μm, the as-deposited Mg-Gd-Y-Zn-Zr alloy is mainly composed of α-Mg matrix, (Mg,Zn)3(Gd,Y) eutectic phase, RE-rich particles, and rare-earth (RE) segregation zone. Following a 12-h heat treatment at 500 °C, the average grain size of the α-Mg matrix showed no appreciable changes. The α-Mg matrix also dissolved the (Mg, Zn)3(Gd, Y) phases, which led to the production of long period stacking ordered (LPSO) phases and the disappearance of the RE-segregation zone. The appearance of the nanoscale β′ phase following aging heat treatment. The deposited alloys had the following tensile properties: 196.5 ± 24 MPa for ultimate tensile strength (UTS), 157.2 ± 14 MPa for yield strength (YS), and 2.08 ± 0.8% for elongation (EL). The formation of LSPO phase can improve the ductility while the formation of nanoscale β′ phase can improve the strength of Mg-Gd-Y-Zn-Zr alloy. Thus, after heat treatment at 500 °C for 12 h, the alloy's EL rose to 9.27 ± 0.94%. After further aging heat treatment for 225 °C at 24h, the alloy's YS rose to 234±3 MPa and its EL was 4.56 ± 0.25%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Additive manufacturing of dense WE43 Mg alloy by laser powder bed fusion
2. Microstructure and mechanical behavior of an additive manufactured (AM) WE43-Mg alloy
3. Creep-resistant magnesium alloys10.1016/S0921-5093(01)01290-4 ↗
4. A high pressure diecast magnesium alloy with superior thermal conductivity and high strength10.1016/j.intermet.2021.107350 ↗
5. Enhanced mechanical properties of as-cast rare earth bearing magnesium alloy via elevated-temperature homogenization
6. Enhanced microstructure homogeneity of rare earthmagnesium alloy under electropulsing10.1016/j.matdes.2024.112668 ↗
7. Effects of Nd on microstructure andmechanical properties of as-cast Mg–12Gd–2Zn–xNd–0.4Zr alloys with stacking faults10.1007/s12613-021-2264-8 ↗
8. High-strength GWZ1031K alloy with gradient structure induced by surface mechanical attrition treatment10.1016/j.matchar.2020.110701 ↗
9. Microstructure evolution and mechanical properties a high-strength Mg-10Gd-3Y–1Zn-0.4Zr alloy fabricated by laser powder bed fusion
10. Effect of trace yttrium on the microstructure, mechanical property and corrosion behavior of homogenized Mg–2Zn–0.1Mn–0.3Ca–xY biological magnesium alloy10.1007/s12613-021-2327-x ↗
11. Temperature field simulation and microstructure study of WAAM fabricated Mg-Gd-Y-Zn-Zr alloy
12. Microstructural evolution and enhanced mechanical properties of Mg–Gd–Y–Zn–Zr alloy via centrifugal casting, ring-rolling and aging10.1016/j.jma.2020.11.009 ↗
13. Characteristic zirconium-rich coring structures in Mg-Zr alloys10.1016/S1359-6462(02)00046-5 ↗
14. Effect of aging treatment on the precipitation transformation and age hardening of Mg-Gd-Y-Zn-Zr alloy10.1016/j.jma.2022.02.012 ↗
15. Enhanced age-hardening response and mechanical properties of the Mg-Gd-Y-Zn-Zr alloy by trace Ag addition10.1016/j.jallcom.2021.159825 ↗
16. Surface metal-matrix composites based on AZ91 magnesium alloy via friction stir processing: a review10.1007/s12613-022-2589-y ↗
17. High-strength Mg‐10Gd‐3Y‐1Zn‐0.5Zr alloy fabricatedby wire-arc directed energy deposition: phase transformation behavior and mechanical properties
18. Review on long-period stacking ordered structures in Mg-Zn-RE alloys10.1007/s12598-012-0510-y ↗
19. Effects of additive manufacturing processes and isothermal aging on the microstructure and properties of 13-8 Mo precipitation hardening martensitic stainless steel
20. Microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloy fabricated by cold metal transfer wire arc additive manufacturing10.1016/j.jmrt.2023.10.265 ↗
21. Wire-arc additive manufacturing of Mg-Gd-Y-Zn-Zr alloy fabricated by cold metal transfer heat source: processing, microstructure, and mechanical properties10.1016/j.jmrt.2024.03.026 ↗
22. Microstructural evolution and mechanical properties of Mg-8.1Gd-2.6Y-0.7Zn-0.5Zr alloy by multi-layer wire arc additive manufacturing10.1016/j.jmrt.2023.11.142 ↗
23. Effect of heat treatment on microstructureevolution and strengthening-toughening behavior of high-strength Mg-Gd-Y-Zn-Zr alloyfabricated by wire-arc additive manufacturing10.1016/j.jmrt.2024.06.202 ↗
24. Effect of annealing on microstructure and tensile properties of as-extruded Mg-5Gd-4Y-0.5Zn-0.5Zr alloy10.1016/j.jmrt.2022.09.080 ↗
25. On the excellent strength-ductility synergy of wire-arc directed energy deposited Mg-Gd-Y-Zn-Zralloy via manipulating precipitates
26. Effect of heat treatment on mechanical properties and microstructure evolution ofMg-9.5Gd-4Y-2.2Zn-0.5Zr alloy10.1016/j.jma.2021.05.018 ↗
27. Recent developments in high-strength Mg-RE-based alloys: focusing on Mg-Gd and Mg-Y systems10.1016/j.jma.2018.08.001 ↗
28. Precipitation in a Mg–10Gd–3Y–0.4Zr (wt.%) alloy during isothermal ageing at 250°C10.1016/j.jallcom.2005.11.046 ↗
29. Microstructural evolution and strengthening mechanism of Mg-Y-RE-Zr alloy fabricated by quasi-directed energy deposition
30. Plastic deformation behavior of Mg12YZn with 18R long-period stacking ordered structure10.1016/j.intermet.2009.07.014 ↗
31. Texture evolution and effect on mechanical properties of repetitive upsetting-extruded and heat treatment Mg-Gd-Y-Zn-Zr alloy containing LPSO phases10.1016/j.jallcom.2022.168666 ↗
32. Microstructure and mechanical properties of a dilute Mg-Gd-Y-Zr alloy fabricated using wire-arc directed energy deposition additive manufacturing10.1016/j.jmrt.2024.02.172 ↗
33. Microstructure and mechanical properties of laser melting deposited GW103K Mg-RE alloy10.1016/j.msea.2017.01.084 ↗
34. Influence of friction stir processing and aging heat treatment on microstructure and mechanical properties of selective laser melted Mg-Gd-Zr alloy
35. High-strength Mg-10Gd-3Y-1Zn-0.5Zr alloy fabricated by wire-arc directed energy deposition: phase transformation behavior and mechanical properties
36. Tailoring strength-ductility balance of caliber-rolled AZ31 Mg alloy through subsequent annealing10.1016/j.jma.2019.11.005 ↗
37. Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys10.1016/j.jallcom.2009.02.131 ↗
38. Strengthening mechanisms in magnesium alloys containing ternary I, W and LPSO phases10.1016/j.jmst.2017.12.005 ↗
39. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗