Influence of graphene content and nickel decoration on the microstructural and mechanical characteristics of the Cu/Sn–Ag–Cu/Cu soldered joint
Source abstract
Abstract
In this research article, lead-free nanocomposite soldering is assessed by using the eutectic composition of Sn-3.5Ag-0.7Cu (SAC, wt%) solder alloy as the matrix and graphene nanoplatelets (GNPs) as the reinforcing agent. Powders of these materials are mixed in a mechanical milling system, then compacted, and sintered before application. The effects of GNPs content with different amounts of 0.05, 0.1, and 0.2 wt% are examined to prepare nanocomposite solders as compared to the SAC solder alloy. Furthermore, to improve the metallurgical compatibility between the graphene and SAC solder matrix, the surface of GNPs was decorated by nickel particles using electroless plating techniques before incorporation. After that, the solderability of these prepared lead-free nanocomposite solders is investigated on the copper substrate. As the main result, the formation of the intermetallic compound (IMC) layers at the interface between the Cu-substrate and solder material was found very determinative to control the mechanical performance of soldered joints during lap-shear testing. The content of GNPs and Ni-coating modification strongly affected the morphology and growth of IMC layers at the interface. By increasing the amount of GNPs up to ∼0.2 wt% and using Ni-coating, the growth of IMC layers was considerably suppressed, leading to a significant improvement of the joint strength up to ∼27%, despite a reduction of ∼50% of the ductility. Furthermore, isothermal aging at 150 °C up to 100 h resulted in a remarkable increase in the shear strength (∼45%) and elongation to failure (∼19.9%) through controlling the growth of the IMC layers at the interface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Humpston · 1993
2. Structure and properties of lead-free solders bearing micro and nano particles
3. Aging induced structural and electrochemical corrosion behaviour of Sn-1.0Ag-0.5Cu and Sn-3.8Ag-0.7Cu solder alloys10.1016/j.jallcom.2018.01.292 ↗
4. Mechanisms of beta-Sn nucleation and microstructure evolution in Sn–Ag–Cu solders containing titanium10.1016/j.jallcom.2018.11.097 ↗
5. Intermetallic compound formation and mechanical property of Sn-Cu-xCr/Cu lead-free solder joint10.1016/j.jallcom.2017.09.011 ↗
6. The role of delayed elasticity and stress relaxation in Sn-Bi-Cu lead-free solders solidified under permanent magnet stirring10.1016/j.jallcom.2018.01.089 ↗
7. Lead-free Sn-based/MW-CNTs nanocomposite soldering: effects of reinforcing content, Ni-coating modification, and isothermal ageing treatment10.1007/s10854-019-00767-6 ↗
8. Microstructure evolution and properties of rapidly solidified Au-20Sn eutectic solder prepared by single-roll technology10.1016/j.jallcom.2018.12.073 ↗
9. The interfacial reaction between In-48Sn solder and polycrystalline Cu substrate during solid state aging10.1016/j.jallcom.2017.12.355 ↗
10. Brittle fracture induced by phase transformation of Ni-Cu-Sn intermetallic compounds in Sn-3Ag-0.5Cu/Ni solder joints under extreme temperature environment10.1016/j.jallcom.2018.10.394 ↗
11. Thermodynamic characteristics, microstructure and mechanical properties of Sn-0.7Cu-xIn lead-free solder alloy10.1016/j.jallcom.2018.01.386 ↗
12. Assessment of room-temperature short-term stress relaxation and strain relaxation with recovery in Sn-Bi lead-free solders solidified under rotating magnetic field10.1016/j.jallcom.2017.09.272 ↗
13. Comparative study on the isothermal aging of bare Cu and ENImAg surface finish for Sn–Ag–Cu solder joints10.1016/j.jallcom.2018.01.054 ↗
14. Microstructural modifications and properties of SiC nanoparticles-reinforced Sn-3.0Ag-0.5Cu solder alloy10.1016/j.matdes.2014.08.058 ↗
15. Novel SiC nanoparticles-containing Sn-1.0Ag-0.5Cu solder with good drop impact performance10.1016/j.msea.2013.04.022 ↗
16. Strengthening mechanism of SiC-particulate reinforced Sn-3.7Ag-0.9Zn lead-free solder10.1016/j.jallcom.2009.02.002 ↗
17. Coupling effects of rare-earth Pr and Al2O3 nanoparticles on the microstructure and properties of Sn-0.3Ag-0.7Cu low-Ag solder10.1016/j.jallcom.2019.01.034 ↗
18. Performance of Sn-3.0Ag-0.5Cu composite solder with TiC reinforcement: physical properties, solderability and microstructural evolution under isothermal ageing10.1016/j.jallcom.2016.05.245 ↗
19. Effect of nano-Fe2O3 additions on wettability and interfacial intermetallic growth of low-Ag content Sn–Ag–Cu solders on Cu substrates10.1016/j.jallcom.2014.12.024 ↗
20. Effect of TiO2 nanoparticle addition on electroless Ni-P under bump metallization for lead-free solder interconnection10.1016/j.msea.2014.02.011 ↗
21. Effects of Ni and TiO2 additions in as-reflowed and annealed Sn-0.7Cu solders on Cu substrates10.1016/j.jmatprotec.2016.11.031 ↗
22. Effect of adding 0.5wt% ZnO nanoparticles, temperature and strain rate on tensile properties of Sn-5.0wt% Sb-0.5wt% Cu (SSC505) lead free solder alloy10.1016/j.msea.2016.01.081 ↗
23. Effect of ageing time on the tensile behavior of Sn-3.5 wt% Ag-0.5 wt% Cu (SAC355) solder alloy with and without adding ZnO nanoparticles10.1016/j.msea.2015.08.053 ↗
24. Mechanical properties of Sn-0.7Cu/Si3N4 lead-free composite solder10.1016/j.msea.2012.07.039 ↗
25. Wettability, electrical and mechanical properties of 99.3Sn-0.7Cu/Si3N4 novel lead-free nanocomposite solder10.4028/www.scientific.net/AMR.277.106 ↗
26. Electrochemical corrosion behavior of CeO2 nanoparticle reinforced Sn-Ag based lead free nanocomposite solders in 3.5wt.% NaCl bath10.1016/j.surfcoat.2014.11.023 ↗
27. Evolution of nano-Ag3Sn particle formation on Cu-Sn intermetallic compounds of Sn-3.5Ag-0.5Cu composite solder/Cu during soldering10.1016/j.jallcom.2010.11.010 ↗
28. Influence of SnO2 nanoparticles addition on microstructure, thermal analysis, and interfacial IMC growth of Sn-1.0Ag-0.7Cu solder10.1007/s11664-017-5374-3 ↗
29. Reinforced solder joint performance by incorporation of ZrO2 nanoparticles in electroless Ni-P composite layer
30. Influence of La2O3 nanoparticle additions on microstructure, wetting, and tensile characteristics of Sn–Ag–Cu alloy10.1016/j.matdes.2015.07.137 ↗
31. Synthesis and properties of pulse electrodeposited lead-free tin-based Sn/ZrSiO4 nanocomposite coatings10.1007/s11661-015-3313-6 ↗
32. Chapter 8 – mechanical properties of carbon nanotubes and graphene A2 – Tanaka, K
33. Graphene: status and prospects10.1126/science.1158877 ↗
34. The rise of graphene10.1038/nmat1849 ↗
35. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
36. Two-dimensional gas of massless Dirac fermions in graphene10.1038/nature04233 ↗
37. Enhanced performance of light-controlled conductive switching in hybrid cuprous oxide/reduced graphene oxide (Cu2O/rGO) nanocomposites10.1364/OL.42.000911 ↗
38. Enhanced X-ray photon response in solution-synthesized CsPbBr3 nanoparticles wrapped by reduced graphene oxide10.1016/j.solmat.2018.08.009 ↗
39. Preparation of cubic Cu2O nanoparticles wrapped by reduced graphene oxide for the efficient removal of rhodamine B10.1016/j.jallcom.2017.05.132 ↗
40. Tunable photoluminescence of water-soluble AgInZnS–graphene oxide (GO) nanocomposites and their application in-vivo bioimaging10.1016/j.snb.2017.07.144 ↗
41. Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide10.1016/j.carbon.2007.02.034 ↗
42. Graphene–aluminum nanocomposites10.1016/j.msea.2011.07.043 ↗
43. The role of microstructural features on the electrical resistivity and mechanical properties of powder metallurgy Al-SiC-Al2O3 nanocomposites10.1016/j.matdes.2017.05.047 ↗
44. Graphene reinforced metal and ceramic matrix composites: a review
45. Microstructures and properties of new Sn–Ag–Cu lead-free solder reinforced with Ni-coated graphene nanosheets10.1016/j.jallcom.2015.09.178 ↗
46. Influence of Ag-modified graphene nanosheets addition into Sn–Ag–Cu solders on the formation and growth of intermetallic compound layers10.1016/j.jallcom.2017.01.286 ↗
47. Fabrication and properties of Ni-modified graphene nanosheets reinforced Sn–Ag–Cu composite solder10.1016/j.jallcom.2018.12.080 ↗
48. Effects of graphene nanosheets on interfacial reaction of Sn–Ag–Cu solder joints10.1016/j.jallcom.2015.08.018 ↗
49. Indentation size effect on Ag nanoparticle-modified graphene/Sn–Ag–Cu solders10.1007/s11664-017-5822-0 ↗
50. Effect of graphene nanosheets on the corrosion behavior of Sn–Ag–Cu solders10.1007/s10854-015-3112-2 ↗
51. Lead free Sn–Ag–Cu solders reinforced by Ni-coated graphene nanosheets prepared by mechanical alloying: microstructural evolution and mechanical durability10.1016/j.msea.2017.07.024 ↗
52. Design and performance of Ag nanoparticle-modified graphene/SnAgCu lead-free solders10.1016/j.msea.2016.04.084 ↗
53. Intermetallic compound layer growth at the interface between Sn–Cu–Ni solder and Cu substrate10.1016/j.jallcom.2004.03.076 ↗
54. Intermetallic compounds growth between Sn-3.5Ag lead-free solder and Cu substrate by dipping method10.1016/j.jallcom.2004.09.023 ↗
55. Effect of alumina nanoparticles on the microstructure and mechanical durability of meltspun lead-free solders based on tin alloys10.1016/j.jallcom.2016.06.296 ↗
56. Influence of autogenous seeding on densification and microstructure in processing of γ-alumina nanopowders10.1080/01411594.2010.514565 ↗
57. Effect of graphene doping on microstructural and mechanical properties of Sn-8Zn-3Bi solder joints together with electromigration analysis10.1016/j.jallcom.2013.05.124 ↗
58. Reinforcement of graphene nanosheets on the microstructure and properties of Sn-58Bi lead-free solder10.1016/j.matdes.2016.10.034 ↗
59. Effect of Graphene Oxide Nano-Sheets (GONSs) on thermal, microstructure and stress–strain characteristics of Sn-5 wt% Sb-1 wt% Ag solder alloy10.1007/s10854-015-4032-x ↗
60. Suppressing effect of 0.5wt.% nano-TiO2 addition into Sn–3.5Ag–0.5Cu solder alloy on the intermetallic growth with Cu substrate during isothermal aging10.1016/j.jallcom.2011.05.116 ↗
61. Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: dispersion, microstructure, stability, and strengthening10.1016/j.matchar.2017.08.009 ↗
62. Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction-stir processing10.1016/j.surfcoat.2017.12.045 ↗
63. Intermetallic compounds (IMCs) formation during dissimilar friction-stir welding of AA5005 aluminum alloy to St-52 steel: numerical modeling and experimental study10.1007/s00170-018-2879-8 ↗
64. Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing10.1016/j.jallcom.2004.07.057 ↗
65. Multi-scale modeling of elasto-plastic response of Sn–Ag–Cu lead-free solder alloys at different ageing conditions: effect of microstructure evolution, particle size effects and interfacial failure10.1016/j.msea.2016.03.011 ↗