Comparative investigation on ingot evolution and product quality under different arc distributions during vacuum arc remelting process
Source abstract
Abstract
The arc characteristics especially the arc distribution of the vacuum arc remelting (VAR) process are closely related to the ingot evolution and consequently the final product quality. Taking segregation defects and solidification quality as the indexes to evaluate the final product quality under different arc distributions, a three-dimensional full-scale transient model for predicting segregation defects is developed in this paper. Local solidification time (LST) and secondary dendrite arm spacing (SDAS) are used to characterize the solidification quality. This model is adopted to predict channel segregation (freckle) and macrosegregation defects during VAR process of Ni-5.8 wt.%Al-15.2 wt.%Ta alloy under several typical arc distributions. The results show that the diffuse arc has the shallowest molten pool among several arc distributions. At the early stage of solidification, the solute enrichment channels formed under the Gaussian and diffuse arc are slender and concentrated, while they are relatively sparse and uneven in thickness under the rotating arc. The value of volume-averaged segregation extent is always the smallest under the diffuse arc and the largest under the Gaussian arc, with final values of 67.53% and 69.66%, respectively. The volume-averaged values of LST and SDAS are relatively the largest under the Gaussian arc, about 1599 s and 209 μm, respectively; and they are the smallest under the diffuse arc, about 1520 s and 206 μm, respectively. In the same process conditions, the product quality of VAR ingots prepared under the diffuse arc is the best, followed by the rotating arc, and the worst under the Gaussian arc.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Welding Techniques and Residual Stresses · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Titanium Nitride (TiN) germination and growth during vacuum arc remelting of a maraging steel10.3390/met10040541 ↗
2. Molecular dynamics simulations of dynamics mechanical behavior and interfacial microstructure evolution of Ni-based single crystal superalloys under shock loading10.1016/j.jmrt.2021.11.116 ↗
3. Microstructure characteristics and mechanical properties of a novel heavy density Ni-W-Co matrix alloy prepared by VIM/VAR10.1016/j.jmrt.2021.05.060 ↗
4. Effects of scandium and silicon addition on the microstructure and mechanical properties of Ti-6Al-4V alloy10.1016/j.jmrt.2020.03.092 ↗
5. Recent development of nickel-based disc alloys and corresponding cast-wrought processing techniques
6. Modeling fluid flow in three-dimensional single crystal dendritic structures10.1016/j.actamat.2010.01.014 ↗
7. Macrosegregation behavior of Ti-10V-2Fe-3Al alloy during vacuum consumable arc remelting process10.1007/s11665-010-9645-x ↗
8. Effect of variation in process parameters on the formation of freckle in INCONEL 718 by vacuum arc remelting10.1007/s11661-008-9638-7 ↗
9. Columnar-to-equiaxed transition during the solidification of a Ti–10V–2Fe–3Al alloy10.1134/S0036029516120119 ↗
10. A multiscale transient modeling approach for predicting the solidification structure in VAR processed alloy 718 ingots10.1007/s11663-012-9715-6 ↗
11. Effect of process parameters on grain structure formation during VAR of INCONEL alloy 71810.1023/B:JMSC.0000048729.68319.f0 ↗
12. A multiscale 3D model of the vacuum arc remelting process10.1007/s11661-013-1680-4 ↗
13. Electrical and magnetic techniques for monitoring arc behavior during VAR of INCONEL 718: results from different operating conditions10.1023/B:JMSC.0000048724.99705.e7 ↗
14. On the modeling of thermal radiation at the top surface of a vacuum arc remelting ingot10.1007/s11663-018-1194-y ↗
15. Segregation development in multiple melt vacuum arc remelting10.1007/s11663-008-9163-5 ↗
16. A parametric study of the vacuum arc remelting (VAR) process: effects of arc radius, side-arcing, and gas cooling10.1007/s11663-019-01719-5 ↗
17. Feedback-Based control over the spatio-temporal distribution of arcs during vacuum arc remelting via externally applied magnetic fields10.1007/s11663-020-01959-w ↗
18. Measurement of the spatio-temporal distribution of arcs during vacuum arc remelting and their implications on VAR solidification defects
19. Multiscale modeling of the vacuum arc remelting process for the prediction on microstructure formation10.1142/S0217979209061305 ↗
20. Solidification in remelting processes10.1016/j.msea.2005.08.157 ↗
21. Liquid metal pool behavior during the vacuum arc remelting of INCONEL 71810.1007/s11663-008-9206-y ↗
22. Liquid metal flow behavior during vacuum consumable arc remelting process for titanium
23. Numerical investigation of segregation evolution during the vacuum arc remelting process of Ni-based superalloy ingots10.3390/met11122046 ↗
24. Thermal-solutal-fluid flow of channel segregation during directional solidification of single-crystal nickel-based superalloys10.1016/j.actamat.2020.116620 ↗
25. Physical and numerical simulation of mixed columnar-equiaxed solidification during cold strip feeding in continuous casting10.1016/j.ijheatmasstransfer.2021.121237 ↗
26. Volume-averaged modeling of multiphase flow phenomena during alloy solidification10.3390/met9020229 ↗
27. Experimental investigation of trajectories, velocities and size distributions of bubbles in a continuous-casting mold10.1016/j.powtec.2021.04.015 ↗
28. Role of electrode rotation on improvement of metal pool profile in electroslag remelting process10.3390/met11111675 ↗
29. The influence of melting rate on structure in VAR and ESR ingots
30. Effect of cooling rate on microstructure and mechanical properties of As-cast GH4169 alloy
31. Multi-scale simulation of grain growth during laser beam welding of nickel-based superalloy10.1016/j.jmrt.2020.10.091 ↗
32. Tree-ring formation during vacuum arc remelting of INCONEL 718: Part II. Mathematical modeling10.1007/s11661-002-0189-z ↗
33. Numerical simulation of the ingot growth during the vacuum arc remelting process10.22364/mhd.53.3.12 ↗
34. Numerical simulation of macrosegregation: a comparison between finite volume method and finite element method predictions and a confrontation with experiments10.1007/s11661-998-0143-9 ↗
35. A response to numerical benchmark for solidification of binary alloys: macro-segregation with thermo-solutal convection
36. Observations of ingot macrosegregation on model systems10.1007/BF02646326 ↗