Aging process and strengthening mechanism of Cu–Cr–Ni alloy with superior stress relaxation resistance
Source abstract
Abstract
With the development trend of connectors to high-current and high-temperature service, copper alloy connectors are required to have superior stress relaxation resistance. In this work, the optimal aging parameter was explored via stress relaxation resistance, strength, microhardness, and conductivity. And the strengthening mechanism of stress relaxation was investigated through the TEM and EBSD microscopic characterization. The results show that the Cu–Cr–Ni alloy reached the peak aging state under 450 °C for 1 h and obtained excellent properties. Especially, the percentage of residual stress in the relaxation test reached 93.1%. The microhardness associated with aging strengthening showed a positive correlation with yield strength and stress relaxation resistance. Then the microhardness after aging can be used as a simple evaluation index of stress relaxation resistance. The Cu–Cr–Ni alloy with superior stress relaxation resistance is mainly related to dislocation strengthening, second phase strengthening, and the coexistence of spinodal decomposition and ordering.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. A systematic approach for the reliability evaluation of electric connector10.1155/2021/8592216 ↗
2. Mechanical behavior investigation of press-fit connector based on finite element simulation and its reliability evaluation10.1016/j.microrel.2020.114010 ↗
3. Stress relaxation in an electrical connector
4. Prediction of the behaviour of copper alloy components under complex loadings by electro-thermomechanical coupled simulations10.1080/02670836.2018.1471380 ↗
5. Relaxation investigation on durability for terminals of CPU socket connectors10.1016/j.matdes.2008.05.004 ↗
6. Stress relaxation analysis in cold rolled sheet10.1016/0924-0136(92)90089-B ↗
7. Effect of Mg on the stress relaxation resistance of Cu–Cr alloys10.1016/j.msea.2020.140144 ↗
8. Mechanical properties of Cu–Cr system alloys with and without Zr and Ag10.1007/s10853-007-2159-8 ↗
9. Research on the stress relaxation behaviour of Cu–0.23Cr–0.08Ag alloy10.1080/02670836.2021.1913548 ↗
10. Stress relaxation properties and microscopic deformation structure in bending of the C7025 and C7035 alloy10.3390/cryst8080324 ↗
11. Stress relaxation properties and microscopic deformation structure of H68 and QSn6.5–0.1 copper alloys at 353 K10.1016/S0921-5093(97)00688-6 ↗
12. Effect of deformation and aging treatment on the microstructure and properties of Cu-0.45Cr-0.14Ti (wt.%) alloy10.1016/j.jallcom.2020.156776 ↗
13. Effect of two-step cryorolling and aging on mechanical and electrical properties of a Cu–Cr–Ni–Si alloy for lead frames applications10.1016/j.msea.2020.140521 ↗
14. Microstructure and mechanical properties of a high strength Cu-Ni-Si alloy treated by combined aging processes10.1016/j.jallcom.2016.11.137 ↗
15. Effect of aging process on the microstructure and properties of Cu–Cr–Ti alloy10.1016/j.msea.2020.140598 ↗
16. Ordering effects on deformation substructures and strain hardening behavior of a CrCoNi based medium entropy alloy10.1016/j.actamat.2021.116829 ↗
17. Rosalie · 2021
18. Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition10.1126/sciadv.abf3039 ↗
19. Microstructure and bending properties of Cu-Cr-Zr alloy subjected to heat treatment and rolling10.1007/s11665-021-05833-x ↗
20. Akiay · 2019
21. Effect of dislocations on spinodal decomposition, precipitation, and age-hardening of Cu–Ti alloy10.1515/htmp-2014-0038 ↗
22. Effects of pre-deformation on precipitation behaviors and properties in Cu-Ni-Si-Cr alloy10.1016/j.msea.2018.11.045 ↗
23. Age hardening studies of a Cu–4Ti–Cr–Fe alloy10.1080/02670836.2019.1651474 ↗
24. Correlation between microstructure and mechanical properties in the age-hardenable Cu-Cr-Zr alloy10.1016/j.jnucmat.2020.152775 ↗
25. Alloy Wizard. https://www.wieland-alloywizard.com/.
26. Datasheets of Boway. https://www.bowayalloy.com/en/goods/products/cid/28.html.
27. Datasheets of Wieland. https://www.wieland.com/en/resources/downloads#1186.
28. The microstructural origin of work hardening stages10.1016/j.actamat.2018.02.002 ↗
29. Effect of annealing on the microstructure, texture and tensile deformation properties of Cu–3 wt%Ag–0.5 wt%Zr thin sheets rolled at room and cryogenic temperature10.1007/s12540-019-00426-9 ↗
30. Effect of cold rolling and aging treatment on the microstructure and properties of Cu–3Ti–2Mg alloy10.1016/j.jallcom.2019.152915 ↗
31. Response of mechanical properties and corrosion behavior of Al–Zn–Mg alloy treated by aging and annealing: a comparative study10.1016/j.jallcom.2020.156561 ↗
32. Relation between strength and hardness of high-entropy alloys10.1007/s40195-021-01252-y ↗
33. Predicting yield strengths of Al-Zn-Mg-Cu-(Zr) aluminium alloys based on alloy composition or hardness10.1016/j.matdes.2016.03.071 ↗
34. Correlation between the flow stress and the nominal indentation hardness of soft metals10.1016/j.scriptamat.2008.04.039 ↗
35. Age-hardening structure and mechanism of Cu–3at%Ni–1.5 at%Si Corson alloy10.1016/j.msea.2021.142220 ↗
36. Effect of micro-alloying element Ti on mechanical properties of Cu–Cr alloy10.1016/j.jallcom.2020.157004 ↗
37. A high-temperature deformation model based on dislocation movement for wrought aluminium alloys10.1080/02670836.2016.1216026 ↗
38. Microstructure evolution and dislocation strengthening mechanism of Cu–Ni–Co–Si alloy10.1016/j.msea.2021.142023 ↗
39. Effect of processing and heat treatment on behavior of Cu-Cr-Zr alloys to railway contact wire10.1007/BF02586158 ↗
40. Analysis of phases and their role in strengthening of Cu-Cr-Zr-Ti alloy10.1007/s11665-015-1516-z ↗
41. Effect of Cr content on microstructure and properties of aged Cu−Cr−P alloys10.1016/S1003-6326(20)65490-5 ↗
42. Effect of small alloying additions on behaviour of rapidly solidified Cu–Cr alloys10.1179/mst.1990.6.9.892 ↗
43. Comparative study of spinodal decomposition in symmetric and asymmetric Cu-Ni-Cr alloys10.1007/BF00544657 ↗
44. An X-ray study of the dissociation of an alloy of copper, iron and nickel
45. Structure and strength of the age hardened Cu-Ni-Si alloy10.1016/S0254-0584(02)00451-0 ↗
46. Dynamics of phase transformation of Cu-Cr-Zr-Ag Alloy10.1088/1757-899X/758/1/012022 ↗
47. Strengthening mechanisms in nickel-copper alloys: a review10.3390/met10101358 ↗
48. Effect of solution heat treatment on the precipitation behavior and strengthening mechanisms of electron beam smelted Inconel 718 superalloy10.1016/j.msea.2017.01.093 ↗