Anisotropic ductile fracture: experiments, modeling, and numerical simulations
Source abstract
Abstract
The continuous hot rolling process induces anisotropy in the plastic yield and flow and results in an anisotropic ductile fracture. In this study, experiments, including uniaxial in-plane tension tests and shear tests of butterfly specimens along different material orientations, were performed, and microscopic observations were used to determine the differences in damage mechanisms. The Yld91 anisotropic yield stress was introduced into the extended isotropic Gurson-Tvergaard-Needleman (GTN) model, and the associated flow rule (AFR) and non-associated flow rule (NAFR) were adopted to formulate two anisotropic GTN models. Anisotropic GTN models were implemented in finite element software via user subroutines, and were used to predict the fracture initiation of Al2024-T351. For different plastic flow rules, the anisotropic parameters were calibrated using the anisotropic stress and Lankford coefficients. An inverse analysis with a two-stage optimization algorithm was adopted to calibrate the damage-related parameters. Moreover, an extended isotropic GTN model was adopted for comparison. The prediction accuracy of the proposed anisotropic GTN models was evaluated by analyzing the load responses and displacements at fracture for various specimens and material orientations. The good conformation between the experimental results and numerical predictions verifies the predictive ability of the proposed models to a certain degree. In addition, some suggestions and conclusions are provided for the formulation of an advanced anisotropic GTN model with enhanced accuracy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. 2D and 3D visualization of ductile fracture10.1002/adem.200600034 ↗
2. Ductile damage of AA2024-T3 under shear loading: mechanism analysis through in-situ laminography10.1016/j.actamat.2020.116556 ↗
3. Ductile fracture: experiments and computations10.1016/j.ijplas.2010.04.001 ↗
4. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
5. Damage in metal forming10.1016/j.cirp.2020.05.005 ↗
6. 3D in situ study of damage during a ‘shear to tension’ load path change in an aluminium alloy10.1016/j.actamat.2022.117842 ↗
7. Ductile damage mechanism under shear-dominated loading: in-situ tomography experiments on dual phase steel and localization analysis10.1016/j.ijplas.2018.06.003 ↗
8. Ductility and the workability of metals
9. Criteria for ductile fracture and their applications10.1016/0378-3804(80)90006-6 ↗
10. Fracture prediction in plastic deformation processes10.1016/0020-7403(90)90148-C ↗
11. Phenomenological uncoupled ductile fracture model considering different void deformation modes for sheet metal forming10.1016/j.ijmecsci.2018.04.025 ↗
12. A new model of metal plasticity and fracture with pressure and Lode dependence10.1016/j.ijplas.2007.09.004 ↗
13. Application of extended Mohr-Coulomb criterion to ductile fracture10.1007/s10704-009-9422-8 ↗
14. Ductile fracture of an ultra-high strength steel under low to moderate stress triaxiality10.1016/j.engfracmech.2017.12.035 ↗
15. New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals10.1016/j.ijsolstr.2012.02.016 ↗
16. Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality10.1016/j.ijplas.2013.08.006 ↗
17. Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals10.1016/j.ijsolstr.2016.11.034 ↗
18. Anisotropic ductile fracture criterion based on linear transformation10.1016/j.ijplas.2017.04.008 ↗
19. Alternative approach to model ductile fracture by incorporating anisotropic yield function10.1016/j.ijsolstr.2019.01.011 ↗
20. A continuous damage mechanics model for ductile fracture10.1115/1.3225775 ↗
21. Continuum framework for the rate-dependent behavior of anisotropically damaged ductile metals10.1007/s00707-006-0320-0 ↗
22. Continuous damage mechanics - a tool to describe phenomena before crack initiation10.1016/0029-5493(81)90007-8 ↗
23. Void nucleation effects in biaxially stretched sheets10.1115/1.3224807 ↗
24. Continuum theory of ductile rupture by void nucleation and growth10.1115/1.3443401 ↗
25. Analysis of the cup-cone fracture in a round tensile bar10.1016/0001-6160(84)90213-X ↗
26. A new class of damage variables in continuum damage mechanics
27. Isotropic and anisotropic damage variables
28. Cross-identification isotropic/anisotropic damage and application to anisothermal structural failure10.1016/j.engfracmech.2007.05.011 ↗
29. A generic anisotropic continuum damage model integration scheme adaptable to both ductile damage and biological damage-like situations10.1016/j.ijplas.2014.04.005 ↗
30. New tensors for anisotropic damage in continuum damage mechanics
31. Constitutive modeling of void shearing effect in ductile fracture of porous materials10.1016/j.engfracmech.2007.07.022 ↗
32. Modification of the Gurson model for shear failure10.1016/j.euromechsol.2007.08.002 ↗
33. A void coalescence model for combined tension and shear10.1088/0965-0393/17/2/025007 ↗
34. On the extension of the Gurson-type porous plasticity models for prediction of ductile fracture under shear-dominated conditions10.1016/j.ijsolstr.2014.05.028 ↗
35. Modified GTN model for a broad range of stress states and application to ductile fracture10.1016/j.euromechsol.2015.12.009 ↗
36. An extended GTN model for ductile fracture under high and low stress triaxiality10.1016/j.ijplas.2013.08.015 ↗
37. An improved shear modified GTN model for ductile fracture of aluminium alloys under different stress states and its parameters identification10.1016/j.ijmecsci.2020.106081 ↗
38. Extended GTN model for predicting ductile fracture under a broad range of stress states
39. A nonlinear model for ductile damage accumulation under multiaxial non-proportional loading conditions10.1016/j.ijplas.2016.07.003 ↗
40. Experiments with the X0-specimen on the effect of non-proportional loading paths on damage and fracture mechanisms in aluminum alloys10.1016/j.ijsolstr.2019.01.007 ↗
41. Anisotropic fracture modeling of sheet metals: from in-plane to out-of-plane10.1016/j.ijsolstr.2019.08.004 ↗
42. Anisotropic ductile fracture: Part II: Theory10.1016/j.actamat.2004.06.019 ↗
43. Investigation on the ductile fracture of high-strength pipeline steels using a partial anisotropic damage mechanics model10.1016/j.engfracmech.2020.106900 ↗
44. Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: experiments and modeling10.1016/j.ijplas.2014.01.003 ↗
45. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
46. Strain rate and temperature dependent fracture criteria for isotropic and anisotropic metals10.1016/j.ijplas.2012.01.012 ↗
47. Dynamic recrystallization based ductile fracture modeling in hot working of metallic materials10.1016/j.ijplas.2017.04.002 ↗
48. A theory of the yielding and plastic flow of anisotropic metals
49. Anisotropic fracture of advanced high strength steel sheets: experiment and theory10.1016/j.ijplas.2018.01.003 ↗
50. The GTN damage model based on Hill’48 anisotropic yield criterion and its application in sheet metal forming10.1016/j.commatsci.2008.07.020 ↗
51. Numerical simulation of incremental sheet forming based on GTN damage model10.1007/s00170-015-7333-6 ↗
52. Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model10.1016/j.jmatprotec.2014.10.017 ↗
53. A six-component yield function for anisotropic materials10.1016/0749-6419(91)90052-Z ↗
54. Bai · 2008
55. Ductile crack formation on notched Al2024-T351 bars under compression-tension loading10.1016/S0921-5093(04)00883-4 ↗
56. Plastic anisotropy and ductile fracture of bake-hardened AA6013 aluminum sheet10.1016/j.ijsolstr.2018.07.015 ↗
57. On fracture locus in the equivalent strain and stress triaxiality space10.1016/j.ijmecsci.2004.02.006 ↗
58. Experimental characterization and numerical modeling of micromechanical damage under different stress states10.1016/j.matdes.2013.02.075 ↗
59. De Souza Neto · 2008
60. Recent developments in NIKE2D for metalforming analysis and low rate impact10.1016/0029-5493(92)90275-Z ↗
61. An analysis of a new class of integration algorithms for elastoplastic constitutive relations10.1002/nme.1620230303 ↗
62. Experimental program and numerical assessment for determination of stress triaxiality and J3 effects on AA6101-T410.1016/j.tafmec.2020.102476 ↗
63. Void nucleation in alloys with lamella particles under biaxial loadings10.1016/j.eml.2018.05.002 ↗
64. Ductile shear failure or plug failure of spot welds modelled by modified Gurson model10.1016/j.engfracmech.2010.02.031 ↗
65. Fracture-based forming limit criteria for anisotropic materials in sheet metal forming10.1016/j.ijplas.2016.04.014 ↗