journal article·2022-11Open access

Effects of morphology and graphitization of carbon nanomaterials on the rheology, emulsion stability, and filtration control ability of drilling fluids

Siti Zulaika Razali, Robiah Yunus, Dina Kania, Suraya Abdul Rashid, Lim Hong Ngee, G. Abdulkareem-Alsultan, Badrul Mohamed Jan

Abstract

Nanomaterials are good potential additives in drilling fluid to improve the thermal and physical-mechanical properties of the fluids, but their use in this field is still scarce. Ester-based drilling fluid (EBDF) is an environmentally friendly drilling fluid. However, its use is still restricted to low to moderate drilling temperatures due to its poor thermal and hydrolytic stability. This study investigates the roles of morphology and graphitization of carbon nanomaterials on the rheology, filtration, and emulsion stability of EBDF at high pressure high temperature (HPHT) drilling conditions. Various carbon nanomaterials were investigated, including graphene nanopowder, commercial graphene nanoplatelets, in-house graphene nanoplatelets, graphene oxide, and carbon nanotubes cotton. The results showed that the behaviour of EBDF depended on the morphology and graphitization of carbon nanomaterials. Graphene nanopowder demonstrated the best performance due to its large size, low graphitic defect count, and most hydrophobic surface, which improved the EBDF emulsion stability and HPHT filtration properties. Hydrophobic surface of graphene nanopowder sheets provides superior protection against thermal degradation of the emulsifier films in drilling fluid. Filtration tests revealed that graphene nanopowder reduced the filtrate and filter cake thickness by 20% and 25%, respectively, at a graphene concentration of 0.007 wt%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Drilling and Well Engineering · Tunneling and Rock Mechanics · Hydraulic Fracturing and Reservoir Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Applications of graphene and its derivatives in the upstream oil and gas industry: a systematic review10.3390/nano10061013 ↗
2. Monteiro · 2012
3. Nanoparticles in drilling fluid: a review of the state-of-the-art10.1016/j.jmrt.2021.04.089 ↗
4. Towards recent tendencies in drilling fluids: application of carbon-based nanomaterials10.1016/j.jmrt.2021.09.114 ↗
5. Siddharth · 2022 · 171
6. Review of biodegradable synthetic-based drilling fluid: progression, performance and future prospect10.1016/j.rser.2018.03.014 ↗
7. Application of nanotechnology in drilling fluids
8. Study of the use of nanomaterials as drilling mud additives10.1051/e3sconf/20186702007 ↗
9. Thermal energy storage technology to control rheological properties of drilling fluid10.1016/j.molliq.2021.116931 ↗
10. Graphene oxide: surface activity and two-dimensional assembly10.1002/adma.200903932 ↗
11. Rational engineering of physicochemical properties of nanomaterials for biomedical applications with nanotoxicological perspectives10.1186/s40580-016-0064-z ↗
12. A comprehensive review of nanoparticles applications in the oil and gas industry10.1007/s13202-019-00825-z ↗
13. Seetharaman · 2020 · 279
14. Water-based drilling fluid formulation using silica and graphene nanoparticles for unconventional shale applications10.1016/j.petrol.2019.04.085 ↗
15. Impact of ZnO and CuO nanoparticles on the rheological and filtration properties of water-based drilling fluid10.1016/j.colsurfa.2019.03.050 ↗
16. Effect of polyanionic cellulose polymer nanoparticles on rheological properties of drilling mud
17. Experimental investigation of rheological and filtration properties of water-based drilling fluids in presence of various nanoparticles10.1016/j.colsurfa.2018.07.001 ↗
18. Preparation, characterization and filtration control properties of crosslinked starch nanospheres in water-based drilling fluids10.1016/j.molliq.2020.115221 ↗
19. Nano graphene application improving drilling fluids performance
20. An overview of chemical enhanced oil recovery: recent advances and prospects10.1007/s40089-019-0272-8 ↗
21. Experimental investigation and rheological behaviors of water-based drilling mud contained starch-ZnO nanofluids through response surface methodology10.1016/j.molliq.2018.11.142 ↗
22. The assembly of a composite based on nano-sheet graphene oxide and montmorillonite10.1007/s12182-018-0216-3 ↗
23. A review on graphene based nanofluids: preparation, characterization and applications10.1016/j.molliq.2019.01.153 ↗
24. Graphene based nanofluids and nanolubricants – review of recent developments10.1016/j.rser.2016.04.072 ↗
25. Performance evaluation of esters and graphene nanoparticles as an additives on the rheological and lubrication properties of water-based drilling mud10.1016/j.petrol.2021.108680 ↗
26. Application of aluminium oxide nanoparticles to enhance rheological and filtration properties of water based muds at HPHT conditions10.1016/j.colsurfa.2017.10.050 ↗
27. Experimental investigation of the effects of silica nanoparticle on hole cleaning efficiency of water-based drilling mud10.1016/j.petrol.2018.09.097 ↗
28. Joint development of an environmentally acceptable ester-based drilling fluid. Trinidad and Tobago Energy Resources Conference, Port of Spain
29. Developing a thermally stable ester-based drilling fluid for offshore drilling operations by using aluminum oxide nanorods10.3390/su13063399 ↗
30. Caenn · 2017
31. Process intensification of 2-ethylhexyl caprylate/caprate synthesis via a pulsed loop reactor: multi-objective optimization10.1016/j.cep.2020.107837 ↗
32. A review on nanoparticle addition in base fluid for improvement of biodegradable ester-based drilling fluid properties
33. Solvated graphenes: an emerging class of functional soft materials10.1002/adma.201203567 ↗
34. 2014
35. Green synthesis of graphene oxide by seconds timescale water electrolytic oxidation10.1038/s41467-017-02479-z ↗
36. Bulk properties of aqueous graphene oxide and reduced graphene oxide with surfactants and polymers: adsorption and stability10.1039/C8CP02738B ↗
37. Preparation and application of water-in-oil emulsions stabilized by modified graphene oxide
38. Reduced graphene oxide-coated microfibers for oil-water separation10.1039/C9EN00549H ↗
39. A novel architecture for carbon nanotube membranes towards fast and efficient oil/water separation10.1038/s41598-018-25788-9 ↗
40. Fabrication and surface properties of hydrophobic barium sulfate aggregates based on sodium cocoate modification10.1016/j.apsusc.2014.07.068 ↗
41. Thermal conductivity of carbon nanotube nanofluid-Experimental and theoretical study10.1002/htj.20405 ↗
42. Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers10.3762/bjnano.7.109 ↗
43. Investigation of thermal conductivity and rheological properties of nanofluids containing graphene nanoplatelets10.1186/1556-276X-9-15 ↗
44. Dependence of the viscosity of nanofluids on nanoparticle size and material10.1016/j.physleta.2014.04.060 ↗
45. Specific surface area of carbon nanotubes and bundles of carbon nanotubes10.1016/S0008-6223(00)00155-X ↗
46. Nonionic polyol esters as thinner and lubricity enhancer for synthetic-based drilling fluids10.1016/j.molliq.2018.07.014 ↗
47. Impurities in graphenes and carbon nanotubes and their influence on the redox properties10.1039/c2sc21374e ↗
48. Structure and chemistry of graphene oxide in liquid water from first principles10.1038/s41467-020-15381-y ↗
49. Organoclay applications and limits in the environment
50. General introduction: clays, clay minerals, and clay science
51. A new generation of flat rheology invert drilling fluids
52. Coalescence dynamics in oil-in-water emulsions at elevated temperatures10.1038/s41598-021-89919-5 ↗
53. Adsorption of non-ionic surfactants on organoclays in drilling fluid investigated by molecular descriptors and Monte Carlo random walk simulations10.1016/j.apsusc.2020.148154 ↗
54. Ryan · 2011
55. Effect of ferrocene concentration on the carbon nanotube cotton synthesized floating catalyst CVD method
56. Ismail · 2018 · 61
57. Effect of zinc oxide nucleation on flexible bio based carbon nanotube cotton via chemical bath deposition method10.1016/j.mee.2020.111439 ↗
58. Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)-polymer nanocomposites10.1016/j.compositesa.2012.12.008 ↗
59. A comparative study of mechanical, thermal and electrical properties of graphene-, graphene oxide- and reduced graphene oxide-doped microfibrillated cellulose nanocomposites10.1016/j.compositesb.2018.04.018 ↗
60. Gavrielatos · 2018
61. Electrical stability, emulsion stability, and wettability of invert oil-based muds10.2118/20435-PA ↗
62. Rheological properties and damage-control mechanism of oil-based drilling fluid with different types of weighting agents10.1098/rsos.180358 ↗
63. Dynamic filtration of invert-emulsion muds10.2118/24759-PA ↗
64. Fluid filtration and rheological properties of nanoparticle additive and intercalated clay hybrid bentonite drilling fluids10.1016/j.petrol.2015.01.012 ↗
65. Yield-power law model more accurately predicts mud rheology
66. Bingham's model in the oil and gas industry10.1007/s00397-017-0999-y ↗
67. Konsistenzmessungen von Gummi-benzollösungen10.1007/BF01432034 ↗
68. Rheological properties of biopolymers drilling fluids10.1016/j.petrol.2009.04.001 ↗
69. Acid-base behavior of carboxylic acid groups covalently attached at the surface of polyethylene: the usefulness of contact angle in following the ionization of surface functionality10.1021/la00066a016 ↗
70. Zisman · 2021 · vol. 23
71. Effect of surface polarity on water contact angle and interfacial hydration structure10.1021/jp071957s ↗