journal article·2023-01Open access

Dynamic mechanical properties of FGH4097 powder alloy and the applications of its constitutive model

Zhuo Li, Zhengrong Xia, Shaochuan He, Fuzeng Wang, Xian Wu, Yong Zhang, Lan Yan, Feng Jiang

Abstract

As a typical multiphase alloy, FGH4097 has good lasting strength (thermal stability and thermal fatigue properties), excellent wear resistance and heat resistance. It has been widely used in aerospace and other hot-end parts manufacturing fields. Most of the existing researches on the mechanical properties of FGH4097 alloy are carried out at low strain rate. There is no effective research on high temperature dynamic mechanical properties of FGH4097. Through the impact compression test of FGH4097 under different strain rates and different temperature conditions by the split Hopkinson compression bar equipment, the corresponding true stress-true strain curve was obtained, the strain rate sensitivity and temperature sensitivity of the material were analyzed. The specific heat capacity of FGH4097 alloy at different temperatures was measured by a laser thermal conductivity meter, and the adiabatic temperature rise of the alloy at different temperatures and strain rates was studied. The isothermal true stress-strain curve of the alloy was obtained by calculating the thermal softening coefficient. Two constitutive equations, Johnson-Cook and Power-Law, were introduced to fit and characterize the dynamic mechanical properties of FGH4097 alloy at different strain rates and temperatures, and the corresponding material constitutive models were obtained. Comparing the fitting accuracy of the two models, it is found that the fitting accuracy of the Power-Law model is higher, with an average error of less than 8%. The cutting simulation of FGH4097 alloy was carried out by AdvantEdge software, and the effects of strain and strain rate on the machinability of FGH4097 alloy were investigated.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Secondary γ′ evolution and relationship to hot deformation behavior of a supersolvus-treated superalloy with high precipitate volume fraction10.1016/j.msea.2019.138046 ↗
2. Simultaneously enhanced strength and ductility of FGH4097 nickel-based alloy via a novel hot isostatic pressing strategy10.1016/j.msea.2019.05.081 ↗
3. About the possibility of grain boundary engineering via hot-working in a nickel-base superalloy10.1016/j.scriptamat.2010.02.019 ↗
4. Influence of the starting microstructure on the hot deformation behavior of a low stacking fault energy Ni-based superalloy10.1007/s11661-018-4539-x ↗
5. Flow behavior and dynamic recrystallization of a power metallurgy nickel-based superalloy during hot compression in (γ+γ′)-phase region10.1016/j.jallcom.2021.161944 ↗
6. Effects of processing on microstructure and properties of FGH4097 superalloy
7. Influence of cooling rate on the development of multiple generations of γ′ precipitates in a commercial nickel base superalloy10.1016/j.matchar.2011.06.002 ↗
8. Vacancy mediated alloying strengthening effects on γ/γ′ interface of Ni-based single crystal superalloys: a first-principles study10.1016/j.actamat.2017.05.074 ↗
9. Machinability of nickel based superalloys: a review10.1016/j.matpr.2017.02.266 ↗
10. Machinability of nickel-base super alloys: a general review10.1016/S0924-0136(97)00429-9 ↗
11. Effect of alloy composition and laser powder bed fusion parameters on the defect formation and mechanical properties of Inconel 625
12. The wear of ceramic cutting tools
13. Deformation of characteristics of nickel alloys during machining10.1115/1.3225057 ↗
14. Recht · 1964
15. Culver · 1973
16. Analysis of shear banding in twelve materials10.1016/0749-6419(92)90058-K ↗
17. Influence of cutting speed on surface integrity for powder metallurgy nickel-based superalloy FGH9510.1007/s00170-011-3196-7 ↗
18. Qiao · 2011
19. Effects of processing temperatures on FGH4097 superalloy fabricated by hot isostatic pressing: microstructure evolution, mechanical properties and fracture mechanism10.1016/j.msea.2018.08.030 ↗
20. Physical-based constitutive modeling of hot deformation in a hot-extruded powder metallurgy nickel-based superalloy10.1007/s11665-020-05291-x ↗
21. Plastic deformation and dynamic recrystallization of a powder metallurgical nickel-based superalloy10.1016/j.jallcom.2016.03.093 ↗
22. High temperature deformation behavior of hot isostatically pressed P/M FGH4096 superalloy10.1016/j.msea.2009.09.011 ↗
23. Heat-treatment numeric simulation of P/M superalloy forging disc
24. High temperature mechanical behavior of tube stackings-Part I: microstructural and mechanical characterization of Inconel 600 constitutive material10.1016/j.msea.2016.07.088 ↗
25. Cutting force model and damage formation mechanism in milling of 70wt% Si/Al composite
26. Modified Arrhenius-type constitutive model and artificial neural network-based model for constitutive relationship of 316LN stainless steel during hot deformation10.1016/S1006-706X(15)30063-7 ↗
27. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures
28. Analysis and development of common constitutive models for hot deformation of titanium alloys
29. Al7050-T7451 Turning simulation based on the modified power-law material model10.1007/s00170-009-2328-9 ↗
30. Identification of material constitutive laws representative of machining conditions for two titanium alloys: Ti6Al4V and Ti555-310.1115/1.4023674 ↗
31. Dynamic constitutive models of Ti-6Al-4V based on isothermal ture stress-strain curves10.1016/j.jmrt.2022.06.164 ↗
32. Study on constitutive model and deformation mechanism in high speed cutting Inconel71810.1016/j.acme.2018.11.009 ↗
33. Investigation of tensile Johnson-Cook model parameters for Nimonic 80A superalloy10.1016/j.jallcom.2019.06.153 ↗
34. Research progress in powder metallurgy superalloys and manufacturing technologies for aero-engine application
35. Analysis of elastoplastic response in FGH 97 notched specimens based on viscoplastic constitutive model
36. Hot deformation behavior of powder superalloy FGH4097
37. The dynamic compression testing of solids by the method of the split Hopkinson pressure bar10.1016/0022-5096(63)90050-4 ↗
38. Numerical study the flow stress in the machining process10.1007/s00170-014-5966-5 ↗
39. High temperature deformation behavior of TC4 titanium alloy and its flows stress model
40. Development of adiabatic shearing bands in 7003-T4 aluminum alloy under high strain rate impacting10.1016/j.msea.2018.06.087 ↗
41. Flow characteristics and constitutive equations of flow stress in high speed cutting Alloy 71810.1016/j.jallcom.2017.09.067 ↗