Low-cycle fatigue behavior and life prediction of TA15 titanium alloy by crystal plasticity-based modelling
Source abstract
Abstract
It is of significance to reveal the low-cycle fatigue deformation mechanism of titanium alloy with tri-modal microstructure for improving its properties. This work developed a crystal plasticity finite element model based on realistic microstructure to predict the low-cycle fatigue behavior of TA15 titanium alloys with tri-modal microstructure containing primary α (αp), secondary lamellar α (αl) and transformed β (βt). During modelling, plastic strain accumulation (PSA) and energy dissipation were used as the fatigue indicator parameter (FIP) to predict fatigue damage and life. It is found that the fatigue deformation prefers to localize at the interfaces of αp/β, αl/β and at triple junctions, which leads to the initiation of fatigue crack. In addition, the soft geometry of αl will also contribute to the strain localization inside αl grains causing fatigue damage. This is because the local lattice rotation is more prone to occur at these locations due to the tension-compression asymmetry of lattice rotation, which induces the occurrence of the microtexture and aggravates the heterogeneity of the lattice rotation, leading to the localized PSA and the total energy dissipation. And the asymmetry of lattice rotation in each cycle also leads to the tension-compression asymmetry of flow behavior. Both of the two FIPs can effectively predict fatigue life. With the strain amplitude increasing, the PSA-based model shows a relatively higher predictive accuracy of fatigue life than that of the accumulated energy dissipation-based model. The predicted fatigue life is in accordance with the C-M model.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Lütjering · 2007 · 1
2. Formability enhancement in hot spinning of titanium alloy thin-walled tube via prediction and control of ductile fracture10.1016/j.cja.2021.01.002 ↗
3. Effect of long term aging on the fatigue crack propagation in the β titanium alloy Ti 1710.1016/j.msea.2017.09.052 ↗
4. Microstructure stability and micro-mechanical behavior of as-cast gamma-TiAl alloy during high-temperature low cycle fatigue10.1016/j.actamat.2017.12.040 ↗
5. Electron microscope characterization of low cycle fatigue in a high-strength multiphase titanium aluminide alloy10.1016/j.ijfatigue.2009.04.001 ↗
6. Low cycle fatigue behavior of Ti alloy IMI 834 at room temperature10.1016/S0921-5093(01)01468-X ↗
7. Slip transfer and deformation structures resulting from the low cycle fatigue of near-alpha titanium alloy Ti-6242Si10.1016/j.ijplas.2017.09.012 ↗
8. Low cycle fatigue life prediction using unified mechanics theory in Ti-6Al-4V alloys10.3390/e22010024 ↗
9. Low-cycle fatigue behavior and life prediction of CP-Ti under non-proportional and multiaxial loading10.1016/j.engfracmech.2021.107930 ↗
10. Comparison of multiaxial low cycle fatigue behavior of CP-Ti under strain-controlled mode at different multiaxial strain ratios10.1016/j.ijfatigue.2020.105818 ↗
11. Low-cycle fatigue behavior and property of TA15 titanium alloy with tri-modal microstructure10.1016/j.msea.2018.08.080 ↗
12. Development of a trimodal microstructure with superior combined strength, ductility and creep-rupture properties in a near alpha titanium alloy10.1016/j.msea.2017.04.068 ↗
13. Mesoscale deformation mechanisms in relation with slip and grain boundary sliding in TA15 titanium alloy during tensile deformation10.1016/j.jmst.2021.05.008 ↗
14. Local strain accumulation in fatigue crack propagation process of Ti-6Al-4V alloy10.1111/ffe.12559 ↗
15. Microstructure evolution and cyclic deformation behavior of Ti-6Al-4 V alloy via electron beam melting during low cycle fatigue10.1016/j.ijfatigue.2022.106784 ↗
16. The difference in low cycle fatigue behavior of CP-Ti under fully reversed strain and stress controlled modes along rolling direction10.1016/j.msea.2018.11.003 ↗
17. Tension–compression asymmetry of< c+ a> slip in Ti–6Al10.1016/j.scriptamat.2019.11.002 ↗
18. Influence of complex LCF and dwell load regimes on fatigue of Ti–6Al–4V10.1016/j.actamat.2015.09.014 ↗
19. High cycle fatigue behavior of Ti–5Al–5Mo–5V–3Cr–1Zr titanium alloy with bimodal microstructure10.1016/j.jallcom.2016.11.031 ↗
20. Influence of microstructure on strain controlled low cycle fatigue crack initiation and propagation of Ti-55531 alloy10.1016/j.ijfatigue.2021.106678 ↗
21. Comparative study of crack growth behaviors of fully-lamellar and bi-lamellar Ti-6Al-3Nb-2Zr-1Mo alloy10.1016/j.jallcom.2019.02.302 ↗
22. Low-cycle fatigue behavior of Ti-6Mo-5V-3Al-2Fe alloy with various types of secondary α phase10.1088/2053-1591/ab756a ↗
23. Theory of orientation gradients in plastically strained crystals10.1016/S1359-6454(01)00323-8 ↗
24. The role of crystallographic orientations on heterogeneous deformation in a zirconium alloy: a combined experimental and modeling study10.1016/j.ijplas.2020.102785 ↗
25. Microstructure and load sensitive fatigue crack nucleation in Ti-6242 using accelerated crystal plasticity FEM simulations10.1016/j.ijfatigue.2012.10.022 ↗
26. Crystal plasticity FE study of the effect of thermo-mechanical loading on fatigue crack nucleation in titanium alloys10.1111/ffe.12410 ↗
27. Experimental and crystal plasticity modelling study on the crack initiation in micro-texture regions of Ti-6Al-4V during high cycle fatigue tests10.1016/j.ijfatigue.2021.106203 ↗
28. 3D simulation of short fatigue crack propagation by finite element crystal plasticity and remeshing10.1016/j.ijfatigue.2015.05.022 ↗
29. A comparative study on fatigue indicator parameters for near-α titanium alloys10.1111/ffe.13862 ↗
30. High– and low–cycle fatigue crack initiation using polycrystal plasticity10.1098/rspa.2003.1258 ↗
31. Low-cycle fatigue life prediction of a polycrystalline nickel-base superalloy using crystal plasticity modelling approach10.1016/j.jmst.2019.05.072 ↗
32. Micromechanical methodology for fatigue in cardiovascular stents10.1016/j.ijfatigue.2012.04.022 ↗
33. Strain-gradient modelling of grain size effects on fatigue of CoCr alloy10.1016/j.actamat.2014.06.044 ↗
34. A crystal plasticity-based approach for creep-fatigue life prediction and damage evaluation in a nickel-based superalloy10.1016/j.ijfatigue.2020.106031 ↗
35. Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior10.1016/j.ijfatigue.2017.10.014 ↗
36. Heterogeneous deformation and damage mechanisms in multi-phase TA15 Ti-alloy: insights from experiments informed damage-crystal plasticity modelling
37. Microstructure-based crystal plasticity modeling of cyclic deformation of Ti–6Al–4V10.1016/j.ijplas.2006.11.009 ↗
38. Image-based crystal plasticity FE framework for microstructure dependent properties of Ti–6Al–4V alloys10.1016/j.msea.2012.06.006 ↗
39. Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: a review10.1016/j.jmst.2019.07.052 ↗
40. Effect of microtexture on short crack propagation in two-phase titanium alloys10.1016/j.ijfatigue.2017.07.022 ↗