journal article·2023-03Open access

Manufacturing of Ti–Nb–Cr–V–Ni high entropy alloy using directed energy deposition and evaluation of materials properties

Ho-In Jeong, Choon-Man Lee, Dong-Hyeon Kim

Abstract

High entropy alloy (HEA) is a new material that can overcome the limitations of the physical properties of conventional materials, exhibit excellent mechanical properties, and be employed in various extreme environments. In particular, refractory HEA composed of refractory materials such as Ti and Ni are expected to exhibit desirable high-temperature properties. Metal additive manufacturing has a shorter manufacturing time than the conventional casting method and is suitable for HEA manufacturing using various metal materials. Specifically, directed energy deposition (DED) has a high solidification rate that is advantageous for grain refining, prevents intermetallic compounds, and averts shrinkage that occurs in the casting method, thereby reducing cracks and deformations and resulting in fewer defects and superior production quality. In this study, a HEA with desirable high-temperature characteristics that are composed of Ti–Nb–Cr–V–Ni was designed by optimizing thermodynamic parameters and deposited using DED. The deposited Ti–Nb–Cr–V–Ni exhibited a body-centered cubic structure. Tensile strength, hardness, differential scanning calorimetry (DSC), and thermal conductivity analyses were performed to analyze its mechanical and thermal properties. Ti–Nb–Cr–V–Ni exhibited a fine structure and high tensile strength at high temperatures due to the characteristics of the DED process, but low elongation at room temperature. These strength characteristics are attributed to the microstructure of Ti–Nb–Cr–V–Ni, which mainly forms the BCC phase. And Ti–Nb–Cr–V–Ni exhibited high hardness and high thermal stability enough to be used in extreme environments with high temperatures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
2. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
3. Mechanically alloyed high entropy alloys: existing challenges and opportunities10.1016/j.jmrt.2022.01.141 ↗
4. Additive manufacturing of high-entropy alloys: a review10.3390/e20120937 ↗
5. Manufacturing of Ti-Nb-Cr-V-Ni-Al refractory high-entropy alloys using direct energy deposition10.3390/ma15196570 ↗
6. Additive manufacturing of high entropy alloys: a practical review10.1016/j.jmst.2020.11.029 ↗
7. Laser-Assisted machining of Ti-6Al-4V fabricated by DED additive manufacturing10.1007/s40684-020-00221-7 ↗
8. Laser powder bed fusion of Mo2C/Ti-6Al-4V composites with alternately laminated α′/β phases for enhanced mechanical properties
9. A review of the latest developments in the field of refractory high-entropy alloys10.3390/cryst11060612 ↗
10. CoCrFeNiTi-based high-entropy alloy with superior tensile strength and corrosion resistance achieved by a combination of additive manufacturing using selective electron beam melting and solution treatment10.1016/j.matlet.2016.11.026 ↗
11. Mechanical and corrosion properties of CoCrFeNiTi-based high-entropy alloy additive manufactured using selective laser melting
12. Additive manufactured new hybrid high entropy alloys derived from the AlCoFeNiSmTiVZr system10.1016/j.apsusc.2018.12.300 ↗
13. Additive manufacturing of high-entropy alloys by thermophysical calculations and in situ alloying10.1016/j.jmst.2021.03.038 ↗
14. Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility10.1016/j.msea.2021.142512 ↗
15. Additively manufactured fine grained Ni6Cr4WFe9Ti high entropy alloys with high strength and ductility
16. Synthesis and microstructure characterization of Ni-Cr-Co-Ti-V-Al high entropy alloy coating on Ti-6Al-4V substrate by laser surface alloying10.1016/j.matchar.2016.09.011 ↗
17. Effect of laser parameters on the properties of high entropy alloys: a preliminary study10.1016/j.matpr.2020.04.198 ↗
18. 3D printing and chemical dealloying of a hierarchically micro- and nanoporous catalyst for wastewater purification10.1021/acsami.1c14076 ↗
19. High entropy alloys manufactured by additive manufacturing10.3390/met10050639 ↗
20. Phase selection, microstructure and properties of laser rapidly solidified FeCoNiCrAl2Si coating10.1016/j.intermet.2011.03.017 ↗
21. The influence of columnar to equiaxed transition on deformation behavior of FeCoCrNiMn high entropy alloy fabricated by laser-based directed energy deposition
22. The effect of post-processing operations on mechanical characteristics of 304L stainless steel fabricated using laser additive manufacturing10.1016/j.jmrt.2021.08.142 ↗
23. The effect of plasma-assisted machining and additive path strategies of Inconel 718 manufactured with directed energy deposition10.1016/j.jmrt.2022.05.108 ↗
24. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
25. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
26. On the nonisospectral modified Kadomtsev–Peviashvili equation10.1016/j.jmaa.2007.12.032 ↗
27. Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys10.2320/matertrans1989.41.1372 ↗
28. QCD NLO and EW NLO corrections to tt∼H production with top quark decays at hadron collider10.1016/j.physletb.2014.09.022 ↗
29. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
30. Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems10.1016/j.actamat.2014.04.033 ↗
31. Design and development of Ti–Zr–Hf–Nb–Ta–Mo high-entropy alloys for metallic biomaterials10.1016/j.matdes.2021.109548 ↗
32. Effects of cryogenic treatments on phase transformations, microstructure and mechanical properties of near βTi alloy10.1016/j.jallcom.2021.160495 ↗
33. Ezugwu · 2017
34. Significant tensile ductility and toughness in an ultrafine-structured Ti68.8Nb13.6Co6Cu5.1Al6.5 bi-modal alloy10.1016/j.msea.2014.07.108 ↗
35. Structure-property relations of lightweight Ti-Sc-Zr-Nb-V high-entropy alloys10.1016/j.jallcom.2022.165295 ↗
36. Effect of heat treatment on morphology evolution of Ti2Ni phase in Ti-Ni-Al-Zr alloy
37. Design and characterization of eutectic refractory high entropy alloys
38. Rahim · 2015
39. Tensile properties and microstructural characterization of additive manufactured, investment cast and wrought Ti6Al4V alloy
40. Effect of rolling force on tensile properties of additively manufactured Inconel 718 at ambient and elevated temperatures10.1016/j.jallcom.2021.161050 ↗
41. Computational design of light and strong high entropy alloys (HEA): obtainment of an extremely high specific solid solution hardening10.1016/j.scriptamat.2018.07.024 ↗
42. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
43. The effect of post-processing operations on surface characteristics of 316L stainless steel produced by selective laser melting
44. The effect of Al on the formation and stability of a BCC – B2 microstructure in a refractory metal high entropy superalloy system
45. Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications10.1007/s00170-010-2791-3 ↗