journal article·2023-09Open access

Microstructures and intergranular corrosion resistances of hot-rolled austenitic stainless steel clad plates

Ju-Chan Jin, Soochul Cho, Kihyuk Kim, Hoseop Sim, Byung Gyu Park, Young-Kook Lee

Abstract

In this study, two stainless steel clad plates (STS 316L/A516-70N and STS 304L/A516-70N) were fabricated without Ni interlayers by hot rolling and normalizing under the same conditions, and their microstructures and intergranular corrosion resistances were comparatively evaluated. Although a similar amount of C diffused from carbon steel to stainless steel during clad fabrication, the thickness of the grain-boundary carburized layer was thinner in STS 316L due to Mo atoms segregated at the grain boundaries. The stainless steel parts of both clad plates had carbides even at their free surfaces and STS 304L also had some amount of δ ferrite. Nevertheless, the corrosion resistance of the free surfaces of both stainless steels was not undermined.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Interface formation and bonding mechanisms of hot-rolled stainless steel clad plate
2. Fracture toughness and hydrogen embrittlement susceptibility on the interface of clad steel pipes with and without a Ni-interlayer10.1016/j.msea.2016.12.116 ↗
3. Heat-treatment of clad steel plate for application of hull structure10.1016/j.oceaneng.2016.06.042 ↗
4. Mechanical properties of stainless-clad bimetallic steel at elevated temperatures10.1016/j.jcsr.2019.105704 ↗
5. Effect of post weld heat treatment on stress corrosion cracking of a low alloy steel to stainless steel transition weld10.1016/S0010-938X(00)00182-7 ↗
6. Effect of cladding conditions on solidification cracking behavior during dissimilar cladding of inconel alloy FM 52 and 308L stainless steel to carbon steel: evaluation of solidification brittle temperature range by transverse-varestraint test10.3365/KJMM.2020.58.6.403 ↗
7. Experimental and numerical analysis of multilayered steel sheets upon bending10.1016/j.jmatprotec.2010.07.003 ↗
8. Microstructures and properties of roll-bonded stainless/medium carbon steel clad plates10.1016/j.jmatprotec.2018.06.007 ↗
9. Effect of interface oxides on shear properties of hot-rolled stainless steel clad plate10.1016/j.msea.2016.05.066 ↗
10. The tensile behaviors and fracture characteristics of stainless steel clad plates with different interfacial status10.1016/j.msea.2016.10.033 ↗
11. Mechanical bonding properties and interfacial morphologies of austenitic stainless steel clad plates10.1016/j.msea.2017.04.080 ↗
12. Microstructure and mechanical properties of hot rolled stainless steel clad plate by heat treatment10.1016/j.matchemphys.2018.06.033 ↗
13. Microstructure, mechanical properties and interface bonding mechanism of hot-rolled stainless steel clad plates at different rolling reduction ratios10.1016/j.jallcom.2018.06.109 ↗
14. Meso and microscale clad interface characteristics of hot-rolled stainless steel clad plate10.1016/j.matchar.2018.12.008 ↗
15. Effect of heat treatment on microstructure and properties of clad plates 316L/Q370qE10.3390/ma12091556 ↗
16. Interface characteristics and fracture behaviour of hot rolled stainless steel clad plates with different vacuum degree10.1016/j.apsusc.2018.08.221 ↗
17. Microstructure and interface fracture characteristics of hot-rolled stainless steel clad plates by adding different interlayers
18. Effect of heat treatment on the microstructure and corrosion resistance of stainless/carbon steel bimetal plate
19. Study of Stainless-Clad Steel Plates (Study of heavy stainless-clad steel plates for a nuclear reactor)
20. Synthesis studies on stainless clad steels
21. Comparative study on microstructures of hot-rolled STS 304L/A516-70N and STS 316L/A516-70N clad plates
22. Mechanical behavior and interfacial damage of carbon steel-stainless steel corrosion resisted-alloy (CRA) cladded plate: hybrid analysis based on experiment and finite element modeling10.1016/j.msea.2022.143697 ↗
23. Evaluation and prediction of formation of heat-affected zone and mechanical properties according to welding method of STS 316L/A516-70N clad plates10.3365/KJMM.2022.60.12.873 ↗
24. The evolution behavior and constitution characteristics of interfacial oxides in the hot-rolled stainless steel clad plate10.1016/j.corsci.2022.110866 ↗
25. Analysis of the explosive cladding of cu–low carbon steel plates10.1016/S0924-0136(03)00539-9 ↗
26. An investigation on the explosive cladding of 316L stainless steel-din-P355GH steel10.1016/j.jmatprotec.2004.03.012 ↗
27. Hierarchical microstructure of explosive joints: example of titanium to steel cladding10.1016/j.msea.2010.11.092 ↗
28. Post-fire performance of bonding interface in explosion-welded stainless-clad bimetallic steel
29. Corrosion resistance of explosion claddingplate of carbon steel and 316L stainless steel10.1179/1743278211Y.0000000028 ↗
30. Corrosion behavior and mechanical properties of AISI 316 stainless steel clad Q235 plate10.3390/met10040552 ↗
31. Weld overlay cladding of high strength low alloy steel with austenitic stainless steel–structure and properties10.1016/j.matdes.2010.10.026 ↗
32. Microstructures and mechanical properties of stainless steel clad plate joint with diverse filler metals10.1016/j.jmrt.2019.12.083 ↗
33. Cladding of stainless steel on aluminum and carbon steel by interlayer diffusion bonding10.1016/j.scriptamat.2006.11.003 ↗
34. Characteristics of bonding interface and strength of hot rolled stainless clad steel10.2355/tetsutohagane1955.76.2_254 ↗
35. Effect of carbon content of substrate on the microstructure changes and tensile behavior of clad layer of stainless steel composites10.1016/j.msea.2021.142201 ↗
36. Microstructure and coordination mechanism of interface of stainless steel/carbon steel cladding plate prepared by vacuum diffusion bonding10.1016/j.msea.2021.142178 ↗
37. Effect of Mo on the lattice parameters and on the chemical composition of sigma phase and M23C6 carbide in an austenitic 25Cr-20Ni steel10.1007/BF02664789 ↗
38. Relationship between pitting and intergranular corrosion of nitrogen-bearing austenitic stainless steels10.2355/isijinternational.36.799 ↗
39. Determination of susceptibility to intergranular corrosion and electrochemical reactivation behaviour of AISI 316L type stainless steel10.1016/j.corsci.2006.01.003 ↗
40. Intergranular corrosion of AISI 316L steel10.1016/S1044-5803(01)00125-5 ↗
41. Decomposition of austenite in austenitic stainless steels10.2355/isijinternational.42.325 ↗
42. Diffusion of carbon in stainless steels10.1016/0022-3115(70)90060-7 ↗
43. A model to predict carburization profiles in high temperature alloys10.1007/BF02655105 ↗
44. Metallurgical conditions required for superior hot-workability of 13% chromium steels in a seamless rolling process10.2355/isijinternational.47.1159 ↗
45. Microstructural characterization of friction stir welding joints of mild steel to Ni-based alloy 62510.1016/j.matchar.2015.10.023 ↗
46. Effect of carbide precipitation on strain-hardening behavior and deformation mechanism of metastable austenitic stainless steel after repetitive cold rolling and reversion annealing10.1016/j.msea.2017.09.103 ↗
47. 2015
48. 2021
49. 2006
50. Microstructural bandings evolution behavior and their effects on microstructure and mechanical property of super-austenitic stainless steel10.1016/j.msea.2018.09.006 ↗
51. 2014
52. (2001). On the development of the electrochemical potentiokinetic method10.1016/S0013-4686(01)00674-0 ↗
53. Elucidating the effect of alloying elements on the behavior of austenitic stainless steels at elevated temperatures10.1007/s11661-016-3764-4 ↗
54. Solute segregation on Σ3 and random grain boundaries in type 316L stainless steel10.1016/j.msea.2013.04.048 ↗
55. Effects of Mo addition and austenitizing temperature on hardenability of low alloy B-added steels10.2355/isijinternational.42.1150 ↗
56. Fracture and the formation of sigma phase, M23C6, and austenite from delta-ferrite in an AlSl 304L stainless steel10.1007/BF02652290 ↗
57. Improving the corrosion resistance of AISI 316L steel for semiconductor piping by controlled delta-ferrite content10.3365/KJMM.2022.60.1.46 ↗
58. 2015
59. 2017
60. Effect of Mo and Mn additions on the corrosion behavior of AISI 304 and 316 stainless steels in H2SO410.1016/j.corsci.2007.11.004 ↗
61. Sedriks · 1996
62. Double loop electrochemical potentiokinetic reactivation test optimization in checking of duplex stainless steel intergranular corrosion susceptibility10.1007/s11661-004-0187-4 ↗
63. The double loop reactivation method for detecting sensitization in AISI 304 stainless steels10.5006/1.3581921 ↗
64. Quantitative modeling of sensitization development in austenitic stainless steel10.5006/1.3585171 ↗
65. Sensitivity to intergranular corrosion according to heat treatment of 304L stainless steel
66. Chemical volume diffusion coefficients for stainless steel corrosion studies10.1007/BF01161455 ↗
67. Effects of delta-ferrite on sensitisation of austenitic stainless steel weld metal10.1080/09507119209548234 ↗
68. Intergranular corrosion behavior associated with delta-ferrite transformation of Ti-modified Super304H austenitic stainless steel10.1016/j.corsci.2014.10.031 ↗
69. Correlation between microstructure and intergranular corrosion behavior of low delta-ferrite content AISI 316L aged in the range 550–700 °C10.1016/j.jallcom.2017.02.273 ↗