journal article·2023-09Open access

Passivation behavior of Cr-modified rebar in simulated concrete pore solutions with different pH

Zhihui Zhang, Xinpan Yu, Na Gong, Youyou Zhang, Huibin Wu, Xinping Mao, Gang Niu

Abstract

In this study, the enhanced passivation effect of Cr-modified rebar compared with carbon rebar has been explored with regard to the formation process of the passive film, which could provide a theoretical basis for the development and application of concrete materials in harsh environments. X-ray photoelectron spectroscopy and capacitance-potential method were used to investigate the composition, structural depth distribution, and semiconductive properties of passive films formed by Cr-modified rebar and carbon rebar in simulated concrete pore solutions with different pH. The kinetics of passive film growth and formation were analyzed by tracking tests of potentiostatic current transients and open circuit potential under natural aeration. The results show that the activation energy of Cr-modified rebar is lower at 14.59 kJ/mol, compared to carbon rebar's 25.36 kJ/mol. In the early stage, Cr-modified rebar can achieve a thinner, more stable initial film in a shorter time than carbon rebar. The rate of reduction of the initial thickening rate of the passive film on Cr-modified rebar is five times than that of carbon rebar per unit pH. The film growth rate after early stage of Cr-modified rebar decreases, whereas that of carbon steel increases, with decreasing pH. The passive film containing Cr oxide or hydroxide enhances the barrier effect of the oxide film to ion migration, and the re-dissociation of Fe oxide hinders the passivation process. This grants the thickness of the stable passive film of the two rebars changing oppositely and the Cr-modified rebar compared to carbon rebar enhance passivation with pH falling.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. A study on the passive state stability of steel embedded in activated fly ash mortars10.1016/j.corsci.2007.11.016 ↗
2. Corrosion behaviour of low-nickel austenitic stainless steels reinforcements: a comparative study in simulated pore solutions10.1016/j.cemconres.2005.10.009 ↗
3. Some questions on the corrosion of steel in concrete—Part I: when, how and how much steel corrodes10.1007/BF02486005 ↗
4. Some questions on the corrosion of steel in concrete. Part II: corrosion mechanism and monitoring, service life prediction and protection methods10.1007/BF02486199 ↗
5. Corroded TempCore vs dual-phase steel reinforcing bars10.1016/j.conbuildmat.2021.122301 ↗
6. The effect of chlorides on the corrosion behaviour of weathered reinforcing bars10.1016/j.electacta.2020.135737 ↗
7. XPS depth profiling study on the passive oxide film of carbon steel in saturated calcium hydroxide solution and the effect of chloride on the film properties10.1016/j.apsusc.2010.12.120 ↗
8. Corrosion of reinforcing steel in simulated concrete pore solutions effect of carbonation and chloride content10.1016/j.corsci.2004.03.013 ↗
9. The effect of simulated concrete pore solution composition and chlorides on the electronic properties of passive films on carbon steel rebar10.1016/j.corsci.2016.01.027 ↗
10. Corrosion behavior of low-Cr steel rebars in alkaline solutions with different pH in the presence of chlorides10.1016/j.jelechem.2017.09.016 ↗
11. Effect of carbonation on the electrochemical behavior of corrosion resistance low alloy steel rebars in cement extract solution10.1016/j.conbuildmat.2016.10.003 ↗
12. Phresponse behaviors and mechanisms of different tungsten/tungsten oxide electrodes for long-term monitoring10.1016/j.jelechem.2016.10.026 ↗
13. The passive behaviour of AISI 316 in alkaline media and the effect of pH: a combined electrochemical and analytical study10.1016/j.electacta.2009.10.026 ↗
14. Passivation behavior of a ferritic stainless steel in concentrated alkaline solutions10.1016/j.jmrt.2015.02.003 ↗
15. Passivation and electrochemical behavior of 316L stainless steel in chlorinated simulated concrete pore solution10.1016/j.apsusc.2016.12.180 ↗
16. Passive behaviour of alloy corrosion-resistant steel Cr10Mo1 in simulating concrete pore solutions with different pH10.1016/j.apsusc.2016.07.142 ↗
17. Passivation characteristics of alloy corrosion-resistant steel Cr10Mo1 in simulating concrete pore solutions: combination effects of pH and chloride10.3390/ma9090749 ↗
18. Passivation and depassivation properties of Cr-Mo alloyed corrosion-resistant steel in simulated concrete pore solution10.1016/j.cemconcomp.2021.104375 ↗
19. Improved corrosion resistance of a new 6% Cr steel in simulated concrete pore solution contaminated by chlorides10.1016/j.corsci.2020.108851 ↗
20. Long-term electrochemical behavior of lowalloy steel in simulated concrete pore solution with chlorides10.1061/(ASCE)MT.1943-5533.0002194 ↗
21. Enhanced passivation of alloy corrosion-resistant steel Cr10Mo1 under carbonation-Passive film formation, the kinetics and mechanism analysis10.1016/j.cemconcomp.2018.06.005 ↗
22. Effect of Cr on the passive film formation mechanism of steel rebar in saturated calcium hydroxide solution10.1016/j.apsusc.2016.08.074 ↗
23. Semiconductive behavior of passive films formed on pure Cr and Fe-Cr alloys in sulfuric acid solution10.1016/S0013-4686(02)00508-X ↗
24. Semiconductor properties and protective role of passive films of iron base alloys10.1016/j.corsci.2006.05.020 ↗
25. Chemical composition and electronic structure of the oxide films formed on 316L stainless steel and nickel based alloys in high temperature aqueous environments10.1016/S0010-938X(00)00012-3 ↗
26. Semiconducting properties of passive films formed on stainless steels: influence of the alloying elements10.1149/1.1838880 ↗
27. Electronic structure of passive films formed on molybdenum-containing ferritic stainless steels10.1149/1.1837169 ↗
28. Threshold chloride concentration for stainless steels activation in concrete pore solutions10.1016/j.cemconres.2009.11.005 ↗
29. Corrosion performance of steel reinforcement in simulated concrete pore solutions in the presence of imidazoline quaternary ammonium salt corrosion inhibitor10.1016/j.conbuildmat.2014.07.082 ↗
30. Influence of carbonation on chloride-induced reinforcement corrosion in simulated concrete pore solutions10.1016/j.conbuildmat.2014.01.030 ↗
31. Influence of stress on passive behaviour of steel bars in concrete pore solution10.1016/j.corsci.2010.12.030 ↗
32. A study of semiconducting properties of hydrogen containing passive films10.1016/j.tsf.2004.01.081 ↗
33. Environmental factors affecting the corrosion behaviour of reinforcing steel: I. The early stage of passive film formation in Ca(OH)2 solutions10.1016/j.corsci.2010.07.035 ↗
34. Long-term behaviour of AISI 304L passive layer in chloride containing medium10.1016/j.electacta.2005.06.040 ↗
35. Electrochemical characterization of mild steel in alkaline solutions simulating concrete environment10.1016/j.jelechem.2014.10.023 ↗
36. Electrochemical and passivation behavior investigation of ferritic stainless steel in alkaline environment10.1016/j.conbuildmat.2015.08.052 ↗
37. Low-nickel stainless steel passive film in simulated concrete pore solution: a SIMS study10.1016/j.apsusc.2010.03.140 ↗
38. Low energy SIMS characterisation of ultra thin oxides on ferrous alloys10.1016/S0169-4332(02)00786-9 ↗
39. Atlas D’equilibres Ë lectrochimiques10.1149/1.2426051 ↗
40. Welded, sandblasted, stainless steel corrugated bars in non-carbonated and carbonated mortars: a 9-year corrosion study10.1016/j.corsci.2015.10.029 ↗
41. Impedance spectroscopy at semiconductor electrodes: review and recent developments10.1016/0013-4686(95)00427-0 ↗
42. The electronic properties of disordered passive films10.1016/0010-938X(89)90030-9 ↗
43. Characterisation of passive films formed on low carbon steel in borate buffer solution (pH 9.2) by electrochemical impedance spectroscopy10.1016/j.apsusc.2005.02.135 ↗
44. The electronic structure of passive films formed on stainless steels10.1016/0010-938X(95)00084-W ↗
45. Semiconducting properties of passive films on stainless steels10.1016/0013-4686(89)87086-0 ↗
46. CeO2-based nanoheterostructures with p-n and n-n heterojunction arrangements for enhancing the solar-driven photodegradation of rhodamine 6G dye10.1007/s10854-019-01429-3 ↗
47. Effect of pH on pitting corrosion of stainless steel welds in alkaline salt water10.1016/j.conbuildmat.2014.06.090 ↗
48. Semiconducting and passive film properties of nitrogen-containing type 316LN stainless steels10.1016/j.corsci.2006.05.041 ↗
49. TiO2/graphene/NiFe-layered double hydroxide nanorod array photoanodes for efficient photoelectrochemical water splitting10.1039/C6EE01092J ↗
50. Effect of the final annealing of cold rolled stainless steels sheets on the electronic properties and pit nucleation resistance of passive films10.1016/j.corsci.2007.08.013 ↗
51. The history of the Point Defect Model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
52. The electrochemical behaviour of 2205 duplex stainless steel in alkaline solutions with different pH in the presence of chloride10.1016/j.electacta.2012.01.025 ↗
53. Photocurrent spectroscopic investigations of passive films on chromium10.1149/1.2086952 ↗
54. Semiconducting properties of passive films formed on Fe-Cr alloys using capacitiance measurements and cyclic voltammetry techniques10.1016/j.matchemphys.2007.02.089 ↗
55. The electrode kinetics of the deposition and dissolution of iron110.1016/0013-4686(61)80026-1 ↗
56. Passive films on stainless steels-chemistry, structure and growth10.1016/S0013-4686(02)00841-1 ↗
57. Corrosion behavior and electrical conductivity of niobium implanted 316L stainless steel used as bipolar plates in polymer electrolyte membrane fuel cells10.1016/j.surfcoat.2010.06.009 ↗
58. Electrochemical and semiconducting properties of thin passive film formed on titanium in chloride medium at various pH conditions10.1016/j.tsf.2015.12.025 ↗
59. Corrosion of the Heat-Affected Zones (HAZs) of API-X100 pipeline steel in dilute bicarbonate solutions at 90°C-An electrochemical evaluation10.1016/j.corsci.2013.05.003 ↗
60. Repassivation behavior of 316L stainless steel in borate buffer solution: kinetics analysis of anodic dissolution and film formation10.1016/j.apsusc.2015.09.018 ↗
61. Growth kinetics of passive films10.1016/0013-4686(87)90015-6 ↗
62. Growth of passivating films on scratched 304L stainless steel in alkaline solution10.1016/0010-938X(83)90111-7 ↗
63. Kinetics of phase change. I General theory10.1063/1.1750380 ↗
64. Electrochemistry of freshly-generated titanium surfaces-II. Rapid fracture experiments10.1016/0013-4686(73)85033-9 ↗
65. The passivity of iron-chromium alloys10.1016/0010-938X(89)90060-7 ↗
66. Electrochemical methods, fundamentals and applications10.1021/ed060pA25.1 ↗
67. Uhlig · 1985
68. Fischer · 1956 · 378
69. The corrosion and oxidation of metals: scientific principles and practical applications (Evans, Ulick R.)10.1021/ed037p662.2 ↗
70. Muraki · 2003
71. Corrosion behavior of Cr modified HRB400 steel rebar in simulated concrete pore solution10.1016/j.conbuildmat.2015.05.073 ↗
72. Study of lepidocrocite γ-FeOOH electrochemical reduction in neutral and slightly alkaline solutions at 25 °C10.1016/j.electacta.2005.05.049 ↗
73. The influence of cyclic voltammetry passivation on the electrochemical behavior of fine and coarse-grained AISI 430 ferritic stainless steel in an alkaline solution10.1016/j.jallcom.2016.03.222 ↗
74. Influence of pH on the passivation behavior of 254SMO stainless steel in 3.5% NaCl solution10.1016/j.corsci.2006.10.032 ↗
75. Analysis of passive films on stainless steel by cyclic voltammetry and Auger spectroscopy10.1149/1.2113959 ↗
76. Electrochemical behavior of aluminum bronze in sulfate-chloride media10.1007/s10800-007-9362-9 ↗
77. Influence of temperature on the corrosion behavior of X80 steel in an acidic soil environment10.20964/2020.01.03 ↗
78. Environmental factors affecting the corrosion behaviour of reinforcing steel. V. Role of chloride and sulphate ions in the corrosion of reinforcing steel in saturated Ca(OH)2 solutions10.1016/j.corsci.2013.04.049 ↗
79. Daniel · 1960 · vol. 71 · A82
80. On the interpretation of cyclic voltammograms of iron electrode in alkaline solution at elevated temperatures10.1016/0013-4686(85)80002-5 ↗
81. Inhibition of corrosion of Al 6061, Aluminum, and an aluminum–copper alloy in chloride-free aqueous media: part 2-behavior in basic solutions10.5006/1.3284865 ↗
82. The coupled effect of temperature and carbonation on the corrosion of rebars in the simulated concrete pore solutions
83. The corrosion potential of stainless steel rebars in concrete: temperature effect10.1016/j.corsci.2012.09.001 ↗
84. Reactions of pipeline steels in carbon dioxide solutions10.1016/S0010-938X(98)00104-8 ↗
85. Gulbrandsen · 1998 · vol. 98
86. Cathodic reaction mechanism of 3Cr low alloy steel corroded in CO2-saturated high salinity solutions10.1016/S1452-3981(23)05083-6 ↗
87. Essential criterion for evaluating the corrosion resistance of 3Cr steel in CO2 environments: prepassivation10.1016/j.corsci.2015.01.030 ↗
88. Corrosion of alloy steels containing 2% chromium in CO2 environments10.1016/j.corsci.2012.06.006 ↗
89. Ghods · 2010