journal article·2023-11Open access

Microstructural evolution and mechanical properties of Mg-8.1Gd-2.6Y-0.7Zn-0.5Zr alloy by multi-layer wire arc additive manufacturing

Dong Ma, Chunjie Xu, Yuanshen Qi, Shang Sui, Jun Tian, Tao Tu, Can Guo, Xiangquan Wu, Zhongming Zhang, Sergei Remennik, Dan Shechtman

Abstract

Wire arc additive manufacturing (WAAM) of Mg-RE (rare-earth)-Zn alloys is important for meeting the requirements of lightweight large-scale components with high manufacturing flexibility. The Mg-8.1Gd-2.6Y-0.7Zn-0.5Zr (GWZ831K, wt.%) alloys were fabricated through the use of WAAM technology, and the microstructure evolution along the building direction and corresponding mechanical properties were then studied. The as-built sample in this paper was composed of finely equiaxed ɑ-Mg grains, eutectic (Mg, Zn)3(Gd, Y) phase, cubic phase, and γʹ precipitates. Furthermore, due to the in-suit heat treatments that were induced by the multiple thermal cycles, more γʹ precipitates were observed in the middle region. The microstructures at different heights were characterized by alternatively distributed fine equiaxed grains (melt pool boundaries, MPB) and coarse equiaxed grains (melt pools, MP). The mechanical properties of the as-built component were found to exhibit yield strength (YS), ultimate tensile strength (UTS), and elongation (EL) of 159 ± 1.0 MPa, 237 ± 4.0 MPa, and 6.7 ± 0.4 % in the building direction (BD) and 163 ± 5.1 MPa, 242 ± 8.7 MPa, and 7.0 ± 0.7 % in the traveling direction (TD). This demonstrates that the WAAM-processed GWZ831K alloy has good isotropy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Influence of ship-based vibration on characteristics of arc and droplet and morphology in wire arc additive manufacturing
2. Revisiting fundamental welding concepts to improve additive manufacturing: from theory to practice10.1016/j.pmatsci.2019.100590 ↗
3. Invited review article: strategies and processes for high quality wire arc additive manufacturing
4. Achieving ultra-high strength and ductility in Mg-9Al-1Zn-0.5Mn alloy via selective laser melting
5. Additive manufacturing of magnesium and its alloys: process-formability-microstructure-performance relationship and underlying mechanism10.1088/2631-7990/acf254 ↗
6. Additive manufacturing of magnesium matrix composites: comprehensive review of recent progress and research perspectives10.1016/j.jma.2023.02.005 ↗
7. Microstructure and mechanical properties of AZ31 magnesium alloy prepared using wire arc additive manufacturing10.1016/j.jallcom.2022.168665 ↗
8. Solidification texture dependence of the anisotropy of mechanical properties and damping capacities of an AZ31 Mg-based alloy fabricated via wire-arc additive manufacturing10.1016/j.jmrt.2023.06.032 ↗
9. Processing, microstructure, and mechanical behavior of AZ31 magnesium alloy fabricated by electron beam additive manufacturing10.1016/j.jallcom.2022.168567 ↗
10. Microstructure and mechanical properties of AZ91 magnesium alloy fabricated by multi-layer and multi-pass CMT based WAAM technique10.1016/j.rineng.2023.101065 ↗
11. Twin evolution in cast Mg-Gd-Y alloys and its dependence on aging heat treatment10.1016/j.jma.2021.09.023 ↗
12. Effect of Gd content on microstructure and mechanical properties of Mg-Gd-Y-Zr alloys under peak-aged condition10.1016/j.msea.2014.07.056 ↗
13. Recent advances in the grain refinement effects of Zr on Mg alloys: a review
14. An investigation into wire arc additive manufacturing of Mg-Y-RE-Zr alloy10.1016/j.matlet.2022.132922 ↗
15. Microstructural evolution and strengthening mechanism of Mg-Y-RE-Zr alloy fabricated by quasi-directed energy deposition
16. Microstructure evolution and mechanical properties of wire arc additively manufactured Mg-Gd-Y-Zr alloy by post heat treatments10.1080/17452759.2023.2225492 ↗
17. Crystal structures of highly-ordered long-period stacking-ordered phases with 18R, 14H and 10H-type stacking sequences in the Mg-Zn-Y system10.1016/j.actamat.2015.08.004 ↗
18. Uniaxial compression deformation and fracture mechanism of cold metal transfer (CMT) arc additive Mg-Gd-Y-Zn-Zr alloy10.1016/j.msea.2023.145201 ↗
19. On the atomic structure of γ″ phase in Mg-Zn-Gd alloy10.1016/j.scriptamat.2017.11.015 ↗
20. Achieving fully equiaxed grain microstructure and isotropic mechanical properties in wire arc additive-manufactured Mg-Y-Nd-Zr alloys10.1016/j.jallcom.2023.171041 ↗
21. Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components10.1016/j.pmatsci.2023.101153 ↗
22. Grain structure control during metal 3D printing by high-intensity ultrasound
23. Microstructure and mechanical properties of weaving wire and arc additive manufactured AZ91 magnesium alloy based on cold metal transfer technique
24. Phase constitutions, growth pattern and mechanical properties of Mg-1.4Gd-1.2Y-xZn-0.15Zr (at%) alloys10.1016/j.jre.2019.12.019 ↗
25. The relationship between (Mg, Zn)3RE phase and 14H-LPSO phase in Mg-Gd-Y-Zn-Zr alloys solidified at different cooling rates10.1016/j.jallcom.2010.12.136 ↗
26. Microstructural characterisation of as cast and homogenised Mg-Gd-Nd-Zr alloys10.1179/174328408X275991 ↗
27. On the unexpected formation of rare earth hydrides in magnesium-rare earth casting alloys10.1016/j.scriptamat.2014.01.007 ↗
28. Effect of cooling rate on the microstructure evolution and mechanical properties of homogenized Mg-Gd-Y-Zn-Zr alloy10.1016/j.msea.2012.08.112 ↗
29. Solute segregation and precipitation in a creep-resistant Mg-Gd-Zn alloy10.1016/j.actamat.2008.08.025 ↗
30. Atomic-scale characterization of the precipitates in a Mg-Gd-Y-Zn-Mn alloy using scanning transmission electron microscopy10.1016/j.vacuum.2022.111668 ↗
31. The role of metastable LPSO building block clusters in phase transformations of an Mg-Y-Zn alloy10.1016/j.actamat.2016.04.016 ↗
32. Exceptional thermal stability and enhanced hardness in a nanostructured Mg-Gd-Y-Zn-Zr alloy processed by high pressure torsion
33. Effect of CMT-WAAM process parameters on bead geometry, microstructure and mechanical properties of AZ31 Mg alloy
34. Development of high strength sand cast Mg-Gd-Zn alloy by co-precipitation of the prismatic β′ and β1 phases10.1016/j.matchar.2019.04.036 ↗
35. Enhanced strength-ductility synergy in a wire and arc additively manufactured Mg alloy via tuning interlayer dwell time10.1016/j.jma.2023.01.015 ↗
36. Improved strength-ductility synergy of directed energy deposited AZ31 magnesium alloy with cryogenic cooling mode10.1080/17452759.2023.2170252 ↗
37. Effect of heat treatment on microstructure evolution and mechanical properties of selective laser melted Mg-11Gd-2Zn-0.4Zr alloy10.1016/j.msea.2021.142139 ↗