journal article·2023-11Open access

Pit growth kinetics of additively manufactured MoNi over-alloyed type 316L stainless steel

Yiqi Zhou, Decheng Kong, Li Wang, Ruixue Li, Xiaoqing Ni, Man Cheng, Chaofang Dong, Dirk Engelberg

Abstract

The microstructure of wrought, laser powder bed fusion (LPBF), and MoNi over-alloyed LPBF type 316L stainless steel is compared. Adding Mo and Ni to LPBF 316L stainless steel resulted in ẟ-ferrite. Potentio-dynamic polarisation was used to rank all microstructures, with LPBF + MoNi has more resistant than LPBF and wrought material. Bipolar electrochemistry was applied, with LPBF samples having the lowest critical pitting potential and highest pit growth kinetics. The best corrosion performance was for LPBF + MoNi stainless steel. Different pitting corrosion resistance as function of process directions were found. The tiny pores negatively impacted the pitting performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. Fracture and fatigue in additively manufactured metals10.1016/j.actamat.2021.117240 ↗
2. Influences of powder morphology and spreading parameters on the powder bed topography uniformity in powder bed fusion metal additive manufacturing
3. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
4. A critical review of corrosion characteristics of additively manufactured stainless steels10.1080/09506608.2020.1855381 ↗
5. Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure10.1016/j.matdes.2022.110874 ↗
6. Corrosion of additively manufactured alloys: a review10.5006/2926 ↗
7. On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting10.1149/2.0551706jes ↗
8. EIS comparative study and critical Equivalent Electrical Circuit (EEC) analysis of the native oxide layer of additive manufactured and wrought 316L stainless steel10.1016/j.corsci.2020.108480 ↗
9. Element-resolved electrochemical analysis of the passivity of additively manufactured stainless steel 316L10.1016/j.corsci.2021.109576 ↗
10. Microstructure and corrosion behavior of 316L stainless steel prepared using different additive manufacturing methods: a comparative study bringing insights into the impact of microstructure on their passivity10.1016/j.corsci.2020.108914 ↗
11. Critical pitting temperature of selective laser melted 316L stainless steel: a mechanistic approach10.1016/j.corsci.2021.109302 ↗
12. Statistical analysis of the pitting corrosion induced by potentiostatic pulse tests of wrought and SLM 316L stainless steels10.1016/j.corsci.2021.110036 ↗
13. Why stainless steel corrodes10.1038/415770a ↗
14. The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid10.1016/j.apsusc.2018.10.150 ↗
15. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes10.1016/j.jmst.2019.03.003 ↗
16. An overview of Direct Laser Deposition for additive manufacturing; Part II: mechanical behavior, process parameter optimization and control
17. The role of microstructure and surface finish on the corrosion of selective laser melted 304L10.1149/2.0431805jes ↗
18. On the effect of build orientation and residual stress on the corrosion of 316L stainless steel prepared by selective laser melting10.1016/j.corsci.2020.109149 ↗
19. Crystallographic texture- and grain boundary density-independent improvement of corrosion resistance in austenitic 316L stainless steel fabricated via laser powder bed fusion
20. Effects of crystallographic orientation on the corrosion behavior of stainless steel 316L manufactured by laser powder bed fusion10.1016/j.corsci.2021.110009 ↗
21. Microstructure and corrosion characteristics of selective laser-melted 316L stainless steel: the impact of process-induced porosities10.1007/s11837-019-03647-w ↗
22. The evolution of pit morphology and growth kinetics in aluminum during atmospheric corrosion10.1038/s41529-023-00328-7 ↗
23. Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: pitting mechanism induced by gas pores10.1016/j.corsci.2020.108520 ↗
24. Quantitative 3D characterization for kinetics of corrosion initiation and propagation in additively manufactured austenitic stainless Steel
25. Time-lapse observation of pitting corrosion in ferritic stainless steel under bipolar electrochemistry control10.1016/j.jelechem.2021.115599 ↗
26. Metallographic screening of duplex stainless steel weld microstructure with a bipolar electrochemistry technique10.1016/j.matchar.2020.110605 ↗
27. Corrosion electrochemistry with a segmented array bipolar electrode10.1016/j.electacta.2020.137668 ↗
28. On the application of bipolar electrochemistry to characterise the localised corrosion behaviour of type 420 ferritic stainless steel10.3390/met10060794 ↗
29. Fast testing of ambient temperature pitting corrosion in type 2205 duplex stainless steel by bipolar electrochemistry experiments10.1016/j.elecom.2020.106779 ↗
30. Application of bipolar electrochemistry to assess the ambient temperature corrosion resistance of solution annealed type 2205 duplex stainless steel10.1016/j.matchemphys.2021.125183 ↗
31. Application of bipolar electrochemistry to assess the corrosion resistance of solution annealed lean duplex stainless steel
32. High throughput screening of localised and general corrosion in type 2205 duplex stainless steel at ambient temperature10.1007/s12613-023-2651-4 ↗
33. Bipolar electrochemistry for high throughput screening of localised corrosion in stainless steel rebars10.1016/j.conbuildmat.2022.130174 ↗
34. A novel high throughput electrochemistry corrosion test method – bipolar electrochemistry10.1016/j.coelec.2023.101263 ↗
35. Brass dezincification with a bipolar electrochemistry technique
36. A rapid corrosion screening technique for grade 2707 hyper-duplex stainless steel at ambient temperature
37. On the application of bipolar electrochemistry for simulating galvanic corrosion behaviour of dissimilar stainless steels10.1016/j.elecom.2021.107023 ↗
38. Ha · Improvement of the corrosion resistance by addition of Ni in lean duplex stainless steels, Metals (Basel) · 2020 · 10 · 1
39. Revisiting the effect of molybdenum on pitting resistance of stainless steels10.1007/s42864-021-00099-1 ↗
40. Crevice corrosion of stainless steels in seawater
41. Revealing the inner rules of PREN from electronic aspect by first-principles calculations10.1016/j.corsci.2021.109561 ↗
42. Effect of powder chemical composition on the as-built microstructure of 17-4 PH stainless steel processed by selective laser melting
43. Influence of molybdenum on microstructure and pitting corrosion behavior of solution-treated duplex stainless steel in a lithium chloride solution
44. Pitting and localized galvanic corrosion characteristics of gas Tungsten arc welded austenitic stainless steel10.1007/s12540-021-01149-6 ↗
45. Pitting and galvanic corrosion behavior of laser-welded stainless steels10.1016/j.jmatprotec.2006.03.128 ↗
46. Mechanical properties and microstructural characteristics of 316L stainless steel fabricated by laser powder bed fusion and binder jetting10.1016/j.jmrt.2023.04.069 ↗
47. Effects of crystallographic orientation on the corrosion behavior of stainless steel 316L manufactured by laser powder bed fusion10.1016/j.corsci.2021.110009 ↗
48. The influence of crystallographic orientation distribution on 316LVM stainless steel pitting behavior10.1016/j.corsci.2008.12.019 ↗
49. On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel10.1016/j.scriptamat.2017.07.037 ↗
50. Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting10.1016/j.corsci.2019.108314 ↗
51. Microstructure and corrosion behavior of a novel additively manufactured maraging stainless steel10.1016/j.electacta.2020.135925 ↗
52. Corrosion behaviour of CoCrMo alloy fabricated by electron beam melting10.1016/j.corsci.2018.04.033 ↗
53. Effect of grain size on pitting corrosion of 304L austenitic stainless steel10.1016/j.corsci.2015.02.024 ↗
54. Sintering anisotropy of binder jetted 316L stainless steel: part II–microstructure evolution during sintering10.1080/00325899.2021.2020486 ↗
55. Influences of cooling rates on delta ferrite of nuclear power 316H austenitic stainless steel10.1016/j.matchar.2021.111029 ↗
56. Intragranular irradiation-assisted stress corrosion cracking (IASCC) of 316L stainless steel made by laser direct energy deposition additive manufacturing: delta ferrite-dislocation channel interaction10.1016/j.jnucmat.2023.154305 ↗
57. Cellular size dependence on the strength of additively manufactured austenitic stainless steel10.1016/j.matlet.2020.128524 ↗
58. The passivity of selective laser melted 316L stainless steel10.1016/j.apsusc.2019.144495 ↗
59. Electrochemical corrosion behavior of nanocrystalline materials-a review10.1016/S1005-0302(10)60001-1 ↗
60. A comprehensive study of the pitting corrosion mechanism of lean duplex stainless steel grade 2404 aged at 475 °C10.1016/j.corsci.2021.109738 ↗
61. A comparative study on the critical pitting criteria of a super ferritic stainless steel at different temperatures in chloride or bromide solution10.1016/j.corsci.2021.109311 ↗
62. A comparative study of critical pitting temperature (CPT) of stainless steels by electrochemical impedance spectroscopy (EIS), potentiodynamic and potentiostatic techniques10.1016/j.corsci.2012.02.026 ↗
63. Growth of corrosion pits on stainless steel in chloride solution containing dilute sulphate10.1016/0010-938X(92)90191-5 ↗
64. Theoretcal prediction of the scan rate dependencies of the pitting potential and the probabilily distribution in the induction time10.1149/1.1837643 ↗
65. Effects of applied potential on stable pitting of 304 stainless steel10.1016/j.corsci.2015.01.034 ↗
66. Computer simulation of single pit propagation in stainless steel under potentiostatic control10.1149/1.1376119 ↗
67. Pitting corrosion behaviour of austenitic stainless steels - combining effects of Mn and Mo additions10.1016/j.corsci.2008.04.005 ↗
68. Passivation-Induced Cr and Mo enrichments of 316L stainless steel surfaces and effects of controlled pre-oxidation10.1149/1945-7111/abc727 ↗
69. Alloy design employing high Cr concentrations for Mo-free stainless steels with enhanced corrosion resistance10.1016/j.corsci.2018.06.021 ↗
70. The crevice corrosion behaviour of stainless steel in sodium chloride solution10.1016/j.corsci.2011.08.012 ↗
71. Crevice corrosion of Q235 carbon steels in a solution of NaHCO3 and NaCl10.1016/j.corsci.2010.01.006 ↗
72. Characterization of the passive film and corrosion of Martensitic AM355 stainless steel10.1080/00032719.2016.1210617 ↗
73. Corrosion properties of powder bed fusion additively manufactured stainless steels
74. The generation of surface roughness during slurry erosion-corrosion and its effect on the pitting potential10.1016/S0010-938X(96)00066-2 ↗
75. Pore elimination mechanisms during 3D printing of metals
76. Dynamics of pore formation during laser powder bed fusion additive manufacturing10.1038/s41467-019-10009-2 ↗
77. Corrosion properties of powder bed fusion additively manufactured 17-4 PH stainless steel10.5006/2365 ↗
78. Corrosion performance of additively manufactured stainless steel parts: a review
79. Prieto · 2018
80. Pit growth studies in stainless steel foils. I. Introduction and pit growth kinetics10.1016/S0010-938X(01)00133-0 ↗
81. On the pitting behaviour of laser powder bed fusion prepared 316L stainless steel upon post-processing heat treatments10.1016/j.corsci.2021.110060 ↗
82. Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting10.1016/j.actamat.2015.06.036 ↗
83. On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting10.1149/2.0551706jes ↗
84. Enhanced corrosion resistance of additively manufactured stainless steel by modification of feedstock10.1038/s41529-021-00215-z ↗
85. Influence of nickel on the susceptibility to corrosion fatigue of duplex stainless steel welds10.1016/S0142-1123(01)00018-4 ↗
86. The role of alloyed molybdenum in the inhibition of pitting corrosion in stainless steels10.1016/S0010-938X(00)00086-X ↗
87. Molybdenum effects on pitting corrosion resistance of FeCrMnMoNC austenitic stainless steels10.3390/met8080653 ↗
88. The behavior of chromium and molybdenum in the propagation process of localized corrosion of steels10.1016/0010-938X(84)90059-3 ↗