journal article·2024-01Open access

Corrosion behavior of different building planes of selective laser melting 316L stainless steel in 0.1 M HCl solution

Zhou Zou, Zhihong Liu, Lanlan Yang, Yanbing Tang, Yanxin Qiao, Daohua Lu

Abstract

This study aimed to investigate the impact of building planes on the microstructure and corrosion behaviors of 316L stainless steel (SS) manufactured using selective laser melting (SLM) when subjected to a 0.1 M HCl solution. The investigation of material corrosion behavior involved the utilization of a wide array of surface characterization techniques, as well as various electrochemical measurements. The findings were subjected to a comparison with those obtained from a commercially rolled 316L SS (R 316L SS). The analysis revealed that the XZ and YZ planes displayed a distinctive fish scale melt pool structure, while the XY plane exhibited a columnar melt pool structure. The densities of the low-angle grain boundaries for different building planes were observed as YZ < XY < XZ. SLM 316L SS showing a broader passivation region and a higher breakdown potential compared to the commercially available R 316L SS, especially the XZ and XY planes. Meanwhile, the passive film on the XZ plane was the more compact and had a lower carrier density. The observed factors contributing to these findings could be attributed to the SLM sample containing an increased proportion of O2−/OH− and Cr2O3 in the passive film. This resulted in the formation of a thick and dense passive film, which is particularly evident on the XY and XZ planes. In addition, it was observed that the nucleation mechanism of the passive films remained unchanged following the SLM process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. An overview of additive manufacturing (3D printing) for microfabrication10.1007/s00542-017-3342-8 ↗
2. Additive manufacturing technologies: current status and future perspectives10.1111/jopr.13477 ↗
3. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
4. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
5. Laser-Based additive manufacturing technologies for aerospace applications10.1002/adem.201900617 ↗
6. Towards large parts manufacturing in additive technologies for aerospace and automotive applications10.1016/j.procs.2022.01.311 ↗
7. Impact of additive manufacturing on titanium supply chain: case of titanium alloys in automotive and aerospace industries
8. Direct additive manufacturing of metal parts for automotive applications10.1016/j.jmsy.2023.04.008 ↗
9. The impact of additive manufacturing for medical care delivery in space: a systematic review10.1002/admt.202001002 ↗
10. Application of metal additive manufacturing in oral dentistry10.1016/j.cobme.2022.100441 ↗
11. Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum10.1016/j.actamat.2013.04.036 ↗
12. In-situ characterization and quantification of melt pool variation under constant input energy density in laser powder bed fusion additive manufacturing process
13. Recent progress in microstructural evolution, mechanical and corrosion properties of medium-Mn steel10.1007/s42243-023-00974-w ↗
14. Corrosion behaviour of hot-rolled 316L stainless steel-A6 carbon steel composite steel plate for marine environment10.1016/j.jmrt.2023.07.227 ↗
15. Effects of cavitation erosion-induced surface damage on the corrosion behaviour of TA31 Ti alloy10.1016/j.ultsonch.2023.106498 ↗
16. Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells10.1016/j.electacta.2018.04.188 ↗
17. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes10.1016/j.jmst.2019.03.003 ↗
18. Strain-induced twins and martensite: effects on hydrogen embrittlement of selective laser melted (SLM) 316L stainless steel10.1016/j.corsci.2022.110669 ↗
19. Microstructure and anisotropy of the mechanical properties of 316L stainless steel fabricated by selective laser melting10.3390/met11050775 ↗
20. The passivity of selective laser melted 316L stainless steel10.1016/j.apsusc.2019.144495 ↗
21. On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting10.1016/j.corsci.2019.108189 ↗
22. The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid10.1016/j.apsusc.2018.10.150 ↗
23. Revealing the superior corrosion protection of the passive film on selective laser melted 316L SS in a phosphate-buffered saline solution10.1016/j.apsusc.2020.147170 ↗
24. Microstructure and corrosion resistance of laser additively manufactured 316L stainless steel10.1007/s11837-016-1822-4 ↗
25. Corrosion behavior of additively manufactured 316L stainless steel in acidic media10.1016/j.mtla.2018.06.015 ↗
26. Corrosion behaviour of 316L stainless steel manufactured by selective laser melting10.1002/maco.201910792 ↗
27. Corrosion behavior of 316L austenitic steel processed by selective laser melting, hot-isostatic pressing, and casting10.1002/maco.201609210 ↗
28. Anisotropy in mechanical properties and corrosion resistance of 316L stainless steel fabricated by selective laser melting10.1007/s12613-019-1740-x ↗
29. Microstructure and corrosion characteristics of selective laser-melted 316L stainless steel: the impact of process-induced porosities10.1007/s11837-019-03647-w ↗
30. Passivation behavior of different building planes of selective laser melting 316L stainless steel in 3.5% NaCl solution
31. Effect of temperature and dissolved oxygen on the passivation behavior of Ti-6Al-3Nb-2Zr-1Mo alloy in artificial seawater10.1016/j.jmrt.2022.01.018 ↗
32. Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: influence of dissolved oxygen and pH10.1016/j.corsci.2019.02.002 ↗
33. Characterization of the passive properties of 254SMO stainless steel in simulated desulfurized flue gas condensates by electrochemical analysis, XPS and ToF-SIMS10.1016/j.corsci.2019.108405 ↗
34. Passivation behavior of 2507 super duplex stainless steel in hot concentrated seawater: infuence of temperature and seawater concentration10.1007/s40195-021-01272-8 ↗
35. Effect of surface damage induced by cavitation erosion on pitting and passive behaviors of 304L stainless steel10.1007/s12613-023-2602-0 ↗
36. Selective laser melting processing of 316L stainless steel: effect of microstructural differences along building direction on corrosion behavior10.1007/s00170-019-04136-9 ↗
37. Lattice variations of Ti-6Al-4V alloy with hydrogen content10.1016/j.matchar.2011.04.019 ↗
38. Microstructural and selective dissolution analysis of 316L austenitic stainless steel10.1016/j.jmrt.2021.10.009 ↗
39. Corrosion of metallic materials fabricated by selective laser melting10.1038/s41529-019-0086-1 ↗
40. Influence of solidification conditions on chemical heterogeneities and dislocations patterning in additively manufactured 316L stainless steel10.1016/j.mtla.2022.101472 ↗
41. About metastable cellular structure in additively manufactured austenitic stainless steels
42. Enhanced strength-ductility synergy via high dislocation density-induced strain hardening in nitrogen interstitial CrMnFeCoNi high-entropy alloy10.1016/j.jmst.2022.09.020 ↗
43. Precipitation behavior, mechanical properties, and corrosion resistance of rare earth–modified Al-Zn-Mg-Cu alloys
44. Application of grain boundary engineering to improve intergranular corrosion resistance in a Fe-Cr-Mn-Mo-N high-nitrogen and nickel-free austenitic stainless steel10.1007/s40195-020-01000-8 ↗
45. Cavitation erosion-corrosion behaviour of Fe-10Cr martensitic steel microalloyed with Zr in 3.5 % NaCl solution10.1016/j.corsci.2021.109382 ↗
46. Improving corrosion resistance of selective laser melted 316L stainless steel through ultrasonic severe surface rolling10.1016/j.jmrt.2022.09.011 ↗
47. Effects of solution temperature on the kinetic nature of passive film on Ni10.1016/j.electacta.2010.09.077 ↗
48. Influence of micro-structure on corrosion behavior of a Ni-based superalloy in 3.5% NaCl10.1016/j.electacta.2007.05.043 ↗
49. Effect of grain size on mechanical property and corrosion resistance of the Ni-based alloy 69010.1016/j.jmst.2017.12.017 ↗
50. Effect of electrochemical hydrogen Charging on corrosion behavior of Ti-6Al-4V alloy in artificial seawater10.1186/s10033-023-00983-6 ↗
51. Passive film growth mechanism of nanocrystalline 304 stainless steel prepared by magnetron sputtering and deep rolling techniques10.1016/j.electacta.2011.05.106 ↗
52. Characterization of ultrasonic-assisted electrochemical deposition of Ni-Co-ZrO210.3390/coatings8060211 ↗
53. Repassivation of the damage generated by cavitation on UNS N08031 in a LiBr solution by means of electrochemical techniques and Confocal Laser Scanning Microscopy10.1016/j.corsci.2010.06.018 ↗
54. The bi-layer structure and the higher compactness of a passive film on nanocrystalline 304 stainless steel10.1016/j.tsf.2015.12.039 ↗
55. Corrosion behavior of a selective laser melted inconel 718 alloy in a 3.5 wt.% NaCl solution10.1007/s11665-021-05909-8 ↗
56. Electrochemical behavior and nonlinear Mott-Schottky characterization of a stainless steel passive film10.1080/00032719.2013.865201 ↗
57. Improved passivation and anticorrosion behaviors of selective laser melted Inconel 718 alloy in acidic solutions10.1007/s42114-023-00786-2 ↗
58. Passive film and surface characterization of Alx(CoCrFeNi)100-x (x = 0, 5,10, 15, 20) high entropy alloys10.1016/j.intermet.2023.107994 ↗
59. Electrochemical and passive behaviour of tin alloyed ferritic stainless steel in concrete environment10.1016/j.apsusc.2017.12.243 ↗
60. Mo(6+) activated multimetal oxygen-evolving catalysts10.1039/C6SC04819F ↗
61. A comparative study of primary and secondary passive films formed on AM355 stainless steel in 0.1 M NaOH10.1016/j.apsusc.2017.08.151 ↗
62. Effect of microstructure on the passive behavior of selective laser melting-fabricated Hastelloy X in NaNO3 solution10.1016/j.matchar.2020.110370 ↗
63. Influence of pH on the passivation behavior of 254SMO stainless steel in 3.5% NaCl solution10.1016/j.corsci.2006.10.032 ↗
64. Electrochemical corrosion and passive behavior of a new high-nitrogen austenitic stainless steel in chloride environment10.1016/j.matchemphys.2022.126837 ↗
65. Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: influence of dissolved oxygen and pH10.1016/j.corsci.2019.02.002 ↗
66. Effect of nitrogen alloying on the semiconducting properties of passive films and metastable pitting susceptibility of 316L and 316LN stainless steels10.1016/j.matchemphys.2010.02.033 ↗