Macro-micro failure and crack coalescence behavior of soft-hard composite rock with three parallel joints under uniaxial compression
Source abstract
Abstract
Jointed soft-hard composite rock mass is very common in engineering. The existence of joint and the uncoordinated deformation of soft-hard layer make the failure behavior more complicated. In this study, soft-hard composite rock with three parallel joints (two coplanar joints and one out-of-plane parallel joint) were fabricated to carry out uniaxial compression experiment. With the aid of digital imagine correlation (DIC) and acoustic emission (AE) technology, the influence of joint angle, ligament angle and the location of out-of-plane joint on crack propagation behavior of specimen is analyzed. The results show that when the hard layer contains more joints, the rock mass presents more obvious brittleness. The variation of peak strength with ligament angle also depends on the rock layer where the out-of-plane crack is located. Three failure modes and ten crack coalescence modes are summarized, which are affected by joint angle and ligament angle. The transition of crack coalescence between adjacent rock layer is mainly influenced by the space of wing cracks at joint tips. The coalescence of rock bridge in the layer with double joints is affected by ligament angle and the relative strength of layer. When the out-of-plane joint is in the hard layer, the coalescence possibility is greatly reduced.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Tunneling and Rock Mechanics · Landslides and related hazards
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A nonlinear rheological shear constitutive model of bolted joints considering initial damage and damage evolution10.1177/10567895231183468 ↗
2. Seismic magnitude calculation based on rate- and state-dependent friction law10.1007/s11771-023-5399-0 ↗
3. Experimental study on shear behavior of rock composite material under normal unloading conditions10.3390/ma16031233 ↗
4. Experimental and numerical investigation on crack mechanism of folded flawed rock-like material under uniaxial compression10.1016/j.enggeo.2021.106210 ↗
5. Cracking and deformation of cuboidal sandstone with a single nonpenetrating flaw under uniaxial compression10.1016/j.tafmec.2022.103284 ↗
6. Fracture analysis of sandstone with a single filled flaw under uniaxial compression10.1016/j.engfracmech.2018.10.009 ↗
7. A comparative study on unfilled and filled crack propagation for rock-like brittle material10.1016/j.tafmec.2014.04.004 ↗
8. Effects of 2D&3D nonparallel flaws on failure characteristics of brittle rock-like samples under uniaxial compression: Insights from acoustic emission and DIC monitoring10.1016/j.tafmec.2022.103391 ↗
9. The effects of crack openings on crack initiation, propagation and coalescence behavior in rock-like materials under uniaxial compression10.1007/s00603-016-0998-9 ↗
10. Experimental study on mechanical properties and failure modes of low-strength rock samples containing different fissures under uniaxial compression10.1016/j.engfracmech.2018.04.044 ↗
11. Fracturing behavior study of three-flawed specimens by uniaxial compression and 3D digital image correlation: sensitivity to brittleness10.1007/s00603-018-1600-4 ↗
12. Failure characteristics and its influencing factors of rock-like material with multi-fissures under uniaxial compression10.1016/S1003-6326(11)61159-X ↗
13. Effect of parallel joint interaction on mechanical behavior of jointed rock mass models10.1016/j.ijrmms.2016.12.010 ↗
14. Mechanical properties and crack evolution of double-layer composite rock-like specimens with two parallel fissures under uniaxial compression10.1016/j.tafmec.2020.102610 ↗
15. Crack propagation and coalescence of step-path failure in rocks10.1007/s00603-018-1661-4 ↗
16. Analysis of crack coalescence in rock-like materials containing three flawsFPart I: experimental approach10.1016/S1365-1609(01)00064-8 ↗
17. Fracture coalescence in rock-type materials under uniaxial and biaxial compression10.1016/S0148-9062(98)00005-9 ↗
18. Crack coalescence in molded gypsum and carrara marble: Part 1. Macroscopic observations and interpretation10.1007/s00603-008-0002-4 ↗
19. Experimental and DEM study on failure behavior and stress distribution of flawed sandstone specimens under uniaxial compression10.1016/j.tafmec.2022.103266 ↗
20. Crack initiation, propagation and coalescence from frictional flaws in uniaxial compression10.1016/j.engfracmech.2010.06.027 ↗
21. An experimental study of the fracture coalescence behaviour of brittle sandstone specimens containing three fissures10.1007/s00603-011-0206-x ↗
22. Crack propagation and coalescence of brittle rock-like specimens with pre-existing cracks in compression10.1016/j.enggeo.2014.12.010 ↗
23. Cracking behavior of rock containing non-persistent joints with various joints inclinations
24. Coalescence of multiple flaws in a rock-model material in uniaxial compression10.1016/S1365-1609(02)00027-8 ↗
25. Numerical study of mechanical properties and microcrack evolution of double-layer composite rock specimens with fissures under uniaxial compression
26. Slope stability analysis considering different contributions of shear strength parameters10.1061/(ASCE)GM.1943-5622.0001937 ↗
27. Mechanical behavior and failure characteristics of double-layer composite rock-like specimens with two coplanar joints under uniaxial loading10.1016/S1003-6326(23)66300-9 ↗
28. Suggested methods for determining the uniaxial compressive strength and deformability of rock materials10.1016/0148-9062(79)91451-7 ↗
29. Fatigue characteristics and fracture behaviour of sandstone under discontinuous multilevel constant-amplitude fatigue disturbance
30. Macro/mesofracture and instability behaviors of jointed rocks containing a cavity under uniaxial compression using AE and DIC techniques
31. Crack coalescence in rock-like specimens with two dissimilar layers and pre-existing double parallel joints under uniaxial compression
32. The influence of infilling conditions on flaw surface relative displacement induced cracking behavior in hard rock10.1007/s00603-019-02033-x ↗
33. Frequency of earthquakes in California10.1785/BSSA0340040185 ↗
34. Crack classification in concrete based on acoustic emission10.1016/j.conbuildmat.2010.05.004 ↗
35. Mechanical properties and crack model of central rock bridge in triaxial unloading test