journal article·2024-05Open access

Synergistic effect of B2 phase and O phase in hot-rolled Ti2AlNb alloy and its influences on mechanical properties

Hongyu Zhang, Yuting Wu, Jiawei Zhang, Yongchang Liu

Abstract

The Ti2AlNb alloy, solution-treated at 1070 °C, underwent hot rolling at 960 °C with different thickness reductions to investigate the synergistic effects of the O phase and B2 phase and their impact on its properties. The results reveal that after solution treatment, the Ti2AlNb alloy consists of nearly spherical O, lath O, and B2 matrix at 30% and 50% thickness reductions during hot rolling. However, at a 70% thickness reduction, the alloy exhibits spherical O, worm-like O, and a continuously distributed B2 phase. The α2 phase formed during solution treatment decomposes during hot rolling. As the thickness reduction increases from 30% to 70%, the O phase content initially rises and then declines, accompanied by an increase in the average dimension of the O phase from 0.25 ± 0.16 μm to 0.36 ± 0.18 μm. Additionally, the B2 phase in the alloy undergoes dynamic recrystallization (DRX) during hot rolling, coinciding with the growth and spheroidization of the O phase. With an increase in the thickness reduction during hot rolling, the elongation of the alloy increases from 5.9% at 30% reduction to 12.47% at 70% reduction. Meanwhile, the ultimate tensile strength reaches its peak value of 1092.2 MPa at 30% reduction, decreases to 936 MPa at 50%, and then increases to 970 MPa at 70%. The tensile strength of the alloy improves due to the interaction and accumulation of dislocations at the phase interface. The continuous distribution of the B2 matrix, dislocation movement, rotation of the O phase, DRX of the B2 phase, and interface slip all contribute to enhanced ductility. Furthermore, the fracture behavior of the Ti2AlNb alloys under various hot rolling conditions was elucidated.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Mechanisms of the preferential cleavage of Ti2AlNb-based alloy: the influence of grain size and local plasticity10.1016/j.msea.2023.144741 ↗
2. In situ experimental characterization and numerical investigation of Fe-TiB2 Steel Matrix Composite behavior considering fully coupled damage model: simulation during incremental forming process
3. Tensile behavior and deformation mechanism for Ti–22Al–25Nb alloy with lamellar O microstructures10.1016/j.msea.2020.140492 ↗
4. Phase transformation and microstructure control of Ti2AlNb-based alloys: a review10.1016/j.jmst.2020.11.022 ↗
5. Cracking behavior and mechanism of the layered microstructure of Ti2AlNb-based alloy containing large stripped α2 and O phases10.1016/j.jmrt.2022.07.165 ↗
6. Improvement in microstructure and high-temperature brittleness of laser-welded Ti-22Al-25Nb joints with the addition of TiB2 powder
7. The effect of 0.02-0.37 strain on the precipitation law of O phase colonies in Ti2AlNb-based alloy during aging10.1016/j.jmrt.2022.11.131 ↗
8. Suppression of texture and enhancement of high-temperature tensile property in heavily deformed gradient Ti2AlNb alloy10.1016/j.jmrt.2023.09.129 ↗
9. Investigation of the phase transformations in Ti-22Al-25Nb alloy10.1016/j.matchar.2016.02.011 ↗
10. Hot deformation behavior of Ti-22Al-25Nb alloy by processing maps and kinetic analysis10.1557/jmr.2016.188 ↗
11. Fabricating Ti2AlNb sheet with tensile strength higher than 1500 MPa by hot packed rolling spark-plasma-sintered pre-alloyed Ti2AlNb powder at the B2+O phase field10.1016/j.jallcom.2021.160110 ↗
12. Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena10.1016/j.msea.2012.01.080 ↗
13. Designed bimodal size lamellar O microstructures in Ti2AlNb based alloy: microstructural evolution, tensile and creep properties10.1016/j.msea.2014.09.035 ↗
14. Fabricating Ti2AlNb sheet with high tensile strength and good ductility by hot packed rolling the spark plasma sintered pre-alloyed powder10.1016/j.msea.2020.140392 ↗
15. Achieving high ductility of Ti2AlNb sheet without sacrificing the tensile strength without post heat treatment10.1016/j.msea.2022.142897 ↗
16. Hot deformation behavior and processing map of a powder metallurgy Ti–22Al–25Nb alloy10.1016/j.jallcom.2014.02.116 ↗
17. Strain rate sensitivity of Ti-22Al-25Nb (at%) alloy during high temperature deformation10.1016/j.msea.2017.10.112 ↗
18. High-temperature deformation behavior of the extruded Ti-22Al-25Nb alloy fabricated by powder metallurgy10.1016/j.matchar.2018.01.019 ↗
19. Deformation and microstructure evolution above the B2 transus of Ti-22Al-25Nb (at%) orthorhombic alloy10.1016/j.msea.2017.10.100 ↗
20. Microstructure evolution and mechanical properties of P/M Ti-22Al-25Nb alloy during hot extrusion10.1016/j.msea.2017.05.019 ↗
21. Evolution of crystallographic texture and microstructure in the orthorhombic phase of a two-phase alloy Ti-22Al-25Nb10.1016/j.intermet.2009.02.002 ↗
22. A study of texture and temperature dependence of mechanical properties in hot rolled Ti-25Al-xNb alloys10.1016/S0254-0584(02)00509-6 ↗
23. Influence of cooling rates on microstructure and tensile properties of a heat treated Ti2AlNb-based alloy10.1016/j.msea.2021.141345 ↗
24. Dynamic precipitation-induced simultaneous enhancement of the strength and plasticity of hot-rolled Zr–9Al alloy10.1016/j.jallcom.2020.154577 ↗
25. Enhanced superplasticity for (α+β)-hot rolled Ti–6Al–4V–0.1B alloy by means of dynamic globularization10.1016/j.matdes.2014.01.033 ↗
26. Hot pack rolling nearly lamellar Ti-44Al-8Nb-(W, B, Y) alloy with different rolling reductions: lamellar colonies evolution and tensile properties10.1016/j.matdes.2017.02.053 ↗
27. Evolution of hot rolling texture in β (B2)-phase of a two-phase (O+B2) titanium–aluminide alloy10.1016/j.msea.2006.07.178 ↗
28. Kinematic strain hardening of Fe-TiB2 composite: experimental analysis and phenomenological modeling
29. Static coarsening behavior of a pre-deformed Ti2AlNb-based alloy during heat treatment10.1016/j.vacuum.2019.108934 ↗
30. Effect of prior α2 phase on precipitation kinetics of O-phase in advanced Ti2AlNb alloy10.1016/j.actamat.2023.118930 ↗
31. Effect of post-heat treatment on Ti2AlNb-based alloy fabricated by twin-wire alternating dual-electron beam additive manufacturing technology10.1016/j.jmst.2023.02.021 ↗
32. Fracture toughness of Ti2AlNb alloy with different Al content: intrinsic mechanism, extrinsic mechanism and prediction model10.1016/j.jallcom.2023.170068 ↗
33. A first principles study of Ti2AlNb intermetallic10.1016/j.ssc.2014.12.002 ↗
34. Microstructural evolution, creep, and tensile behavior of a Ti-22Al-25Nb (at%) orthorhombic alloy10.1016/j.msea.2014.02.004 ↗
35. Quantitative analysis of the effect of heat treatment on microstructural evolution and microhardness of an isothermally forged Ti-22Al-25Nb (at.%) orthorhombic alloy10.1016/j.intermet.2013.09.011 ↗
36. Mechanism and morphology evolution of the O phase transformation in Ti-22Al-25Nb alloy10.1016/j.jmst.2021.01.087 ↗
37. Effect of doping IVB, VB and VIB elements on structure, stability, elastic and electronic properties of the O and B2 of Ti2AlNb intermetallic: a first principles study10.1016/j.jpcs.2023.111362 ↗
38. Effect of the primary O phase on thermal deformation behavior of a Ti2AlNb-based alloy10.1016/j.jallcom.2020.156458 ↗
39. Thermal stability and mechanical properties of Ti-22Al-25Nb alloy with different initial microstructures10.1016/j.jallcom.2020.155794 ↗
40. Mechanisms of globularization of Ti-6Al-4V during static heat treatment10.1007/s11661-003-0103-3 ↗
41. The stability of lamellar structures10.1007/BF02661337 ↗
42. Interfacial bonding mechanism of linear friction welded dissimilar Ti2AlNb–Ti60 joint: grain intergrowth induced by combined effects of dynamic recrystallization, phase transformation and elemental diffusion10.1016/j.jmrt.2023.04.184 ↗
43. The effect of lamellar morphology on tensile and high-cycle fatigue behavior of orthorhombic Ti-22Al-27Nb alloy10.1007/s11661-004-0164-y ↗
44. Formation of fine B2/β + O structure and enhancement of hardness in the aged Ti2AlNb-based alloys prepared by spark plasma sintering10.1007/s11661-017-4193-8 ↗
45. The enhanced tensile property by introducing bimodal size distribution of lamellar O for O+B2 Ti2AlNb based alloy10.1016/j.msea.2013.07.047 ↗