journal article·2025-03Open access

Study of microstructure evolution and fatigue crack extension properties of 42CrMo steel strengthened by induction hardening

Xuewu Li, Zhengqi Li, Lihong Dong, Bin Liu, Haidou Wang, Tian Shi, Shengzhang Yuan, Yupeng Zhang, Chenhu Ma

Abstract

To elucidate the fatigue crack propagation behavior in the gradient microstructure of induction-quenched 42CrMo steel, this paper first examines the variation in microstructure and mechanical properties concerning surface depth, followed by an analysis of crack propagation behavior at the microscale. The results show that the specimens with a 0.6 mm hardened layer, following induction quenching, exhibit a refined grain structure in the hardened layer and display enhanced mechanical properties. Microanalysis of the fatigue fractures in both the stable propagation zone and the transient fracture zone reveals that induction-quenched specimens exhibit more pronounced zigzag fatigue steps, a higher number of secondary cracks, denser fatigue striations, and deeper toughness nests, among other morphological features. These observations provide insight into the mechanism by which induction quenching enhances the fatigue resistance and performance of the material. A detailed microscopic analysis has been conducted on the mixed-mode propagation within the hardened layer, specifically along the <111> orientation through the crystal and the <100> orientation along the crystal. The analysis reveals that the direction of propagation of the through-crystal cracks is parallel to the extension of the {011} crystalline surface. Based on these findings, the mechanism by which induction hardening influences crack growth has been identified, providing a theoretical foundation for subsequent related strengthening processes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Surface Treatment and Residual Stress · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Effect of surface engineering on wear and fatigue behavior of thermally sprayed SiC coating10.1016/j.surfcoat.2022.128751 ↗
2. Investigation of the preparation and tribological behavior of a frictional interface covered with sinusoidal microchannels containing SnAgCu and Ti3SiC210.1016/j.triboint.2020.106368 ↗
3. Review of two-dimensional nanomaterials in tribology: recent developments, challenges and prospects10.1016/j.cis.2023.103004 ↗
4. Analysis of phase transformation and mechanical properties of 55CrMo steel during induction hardening10.1520/JTE20180081 ↗
5. Improvement in frictional and fatigue performances of AISI 4150H steel by dual ultrasonic nanocrystal surface modification for ball screw applications10.1016/j.triboint.2021.107092 ↗
6. Waterborne robust superhydrophobic PFDTES@TiO2-PU coating with stable corrosion resistance, long-term environmental adaptability, and delayed icing functions on Al-Li alloy10.1016/j.jmrt.2024.08.131 ↗
7. The effect of microstructure on the fatigue behavior of titanium alloy graded porous structures fabricated by selective laser melting10.1016/j.jmrt.2023.10.281 ↗
8. Probabilistic fatigue assessment for high-speed railway axles due to foreign object damages10.1016/j.ijfatigue.2018.08.011 ↗
9. The effect of surface treatment and orientation on fatigue crack growth rate and residual stress distribution of wire arc additively manufactured low carbon steel components10.1016/j.jmrt.2023.03.227 ↗
10. Phase transformation kinetics in a coarse-grain Ti17 alloy determined by laser ultrasonics and dilatometry
11. Detection of fatigue crack initiation pre-cursor in meta-stable SS304LN using Rayleigh surface wave harmonic generation10.1016/j.matchar.2023.112959 ↗
12. Effect of TiO2 content on the thermal control properties of Al2O3-xTiO2 composite coatings prepared by supersonic plasma spraying technology10.1016/j.jmrt.2024.08.199 ↗
13. Fatigue fracture analysis of the 42CrMo4 crankshaft used for mining dump truck10.1016/j.engfailanal.2023.107724 ↗
14. Optimizing dislocation strengthening in high-strength medium-carbon steel via fast induction heating quenching & tempering10.1016/j.jmrt.2023.05.260 ↗
15. Development of a mechanically robust superhydrophobic anti-corrosion coating using micro-hBN/nano-Al2O3 with multifunctional properties10.1016/j.ceramint.2024.11.027 ↗
16. The effect of gradient order on impact toughness of carbon S38C axle steels with induction hardening10.1016/j.engfailanal.2023.107254 ↗
17. Fatigue resistance and remaining life assessment of induction-hardened S38C steel railway axles10.1016/j.ijfatigue.2020.106068 ↗
18. Fatigue crack growth behavior in gradient microstructure of hardened surface layer for an axle steel10.1016/j.msea.2017.05.104 ↗
19. Fatigue crack non-propagation behavior of a gradient steel structure from induction hardened railway axles
20. Numerical and experimental investigation of residual stresses during the induction hardening of 42CrMo4 steel10.1016/j.euromechsol.2022.104766 ↗
21. Effect of constitutive model on residual stress development in the pressure tube rolled joint10.1016/j.ijpvp.2021.104318 ↗
22. Plastic strain amplitude dependent surface path of microstructurally short fatigue cracks in face-centred cubic metals10.1016/S0921-5093(99)00060-X ↗
23. Effect of grain disorientation on early fatigue crack propagation in FCC polycrystals: dislocation dynamics simulations and corresponding experimental validation10.1007/s12666-015-0754-y ↗
24. Fatigue crack deflection and branching behavior of low carbon steel under mechanically large grain condition10.1016/j.ijfatigue.2021.106217 ↗
25. Evaluation of the block boundary and sub-block boundary strengths of ferrous lath martensite using a micro-bending test10.1016/j.msea.2010.08.026 ↗
26. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
27. Effect of heating rate on the austenite formation in low-carbon high-strength steels annealed in the intercritical region10.1007/s11661-011-0753-5 ↗
28. Effect of grain size on fatigue-crack growth in 2524 aluminium alloy10.1016/j.ijfatigue.2015.11.011 ↗
29. Geometric characteristics and microstructure of laser-induction hybrid quenching hardened layer on 42CrMo steel
30. Williamson-Hall analysis in evaluation of lattice strain and the density of lattice dislocation for nanometer scaled ZnSe and ZnSe: Cu particles10.1016/j.ceramint.2019.04.107 ↗
31. Experimental and numerical insights into fatigue crack propagation of railway component with gradient residual stress10.1016/j.engfracmech.2024.110111 ↗
32. The effect of heating rate on the microstructure of a soft‐annealed medium carbon steel10.1002/srin.201700158 ↗
33. High-efficiency fast-heating annealing of a cold-rolled dual-phase steel10.1016/j.matdes.2014.01.055 ↗
34. Martensite tempering kinetics: effects of dislocation density and heating rates10.1016/j.matchar.2020.110564 ↗
35. Refinement of cementite in high strength steel plates by rapid heating and tempering10.4028/www.scientific.net/MSF.539-543.4720 ↗
36. Crack retardation equations for the propagation of branched fatigue cracks10.1016/j.ijfatigue.2005.07.016 ↗
37. Effect of grain size on fatigue-crack growth in 2524 aluminium alloy10.1016/j.ijfatigue.2015.11.011 ↗
38. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
39. Work hardening, dislocation structure, and load partitioning in lath martensite determined by in situ neutron diffraction line profile analysis10.1007/s11661-017-4172-0 ↗
40. Crack propagation behavior of impact fracture in case hardening steel subjected to combined heat treatment with excess vacuum carburizing and subsequent induction hardening10.2355/isijinternational.ISIJINT-2019-826 ↗
41. Effect of grain structure on fatigue crack propagation behavior of Al-Cu-Li alloys10.1016/j.jmst.2022.10.085 ↗