Microstructure and properties of Fe20Co20Ni40Al20 high-entropy alloy enhanced via deep cryogenic treatment
Source abstract
Abstract
The Fe 20 Co 20 Ni 40 Al 20 high-entropy alloy (HEA) exhibits a dual-phase structure composed of body-centered cubic(BCC) and face-centered cubic(FCC) crystals. This study investigates the effects of deep cryogenic treatment (DCT) at −196 °C over durations ranging from 0 to 48 h on Fe 20 Co 20 Ni 40 Al 20 HEA synthesized via vacuum induction melting. The microstructure, mechanical properties, and fracture behavior of the alloy are comprehensively analyzed. The findings reveal that dislocations proliferate and migrate during DCT, forming dislocation tangles. High-energy dislocations generate nano-sized dislocation cell at both grain boundaries and within grains, thereby refining the microstructure of the alloy. This process transforms elongated grains into spherical fine grains, thereby enhancing both the strength and hardness of the alloy. After 36 h of DCT, the Vickers hardness of the alloy increases by 13.3 %, reaching 461.5 Vickers hardness (HV). Additionally, the tensile strength improves by 31.4 %, attaining a value of 886.2 MPa. Furthermore, the elongation of the treated alloy rises by 129 %, reaching 6.70 % compared to the untreated sample. These enhancements can be attributed to several strengthening mechanisms, including grain refinement, dislocation strengthening, the reinforcement of nano-sized dislocation cell, and second-phase strengthening. This study confirms that DCT is an effective method for improving the mechanical properties of Fe 20 Co 20 Ni 40 Al 20 HEA.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Preternatural hexagonal high-entropy alloys: a review10.1007/s40195-020-01045-9 ↗
2. Review and research prospects on additive manufacturing technology for agricultural manufacturing10.3390/agriculture14081207 ↗
3. Deformation and failure of the CrCoNi medium-entropy alloy subjected to extreme shock loading10.1126/sciadv.adf8602 ↗
4. Theory-guided design of high-entropy alloys with enhanced strength-ductility synergy10.1038/s41467-023-38111-6 ↗
5. Selecting the proper material for a grain loss sensor based on DEM simulation and structure optimization to improve monitoring ability10.1007/s11119-020-09772-w ↗
6. Evolution of microstructure and mechanical properties of aluminum matrix composites reinforced with dual-phase heterostructures10.1016/j.msea.2024.146500 ↗
7. Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures10.1016/j.actamat.2018.11.049 ↗
8. Microstructure and properties of FeCoNi1.5CuB0.5Y0.2 high-entropy alloy subject to high magnetic field treatment10.1016/j.intermet.2024.108278 ↗
9. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
10. Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0218-9 ↗
11. High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures10.1016/j.actamat.2016.10.038 ↗
12. Microstructure and properties of FeCoNiCrMn and Al2O3 hybrid particle-reinforced aluminum matrix composites fabricated by microwave sintering10.1016/j.jmrt.2023.05.100 ↗
13. Study on the microstructure and performance of FeCoNiCrMn high-entropy alloy-based composites reinforced by nano-Al2O3 particles10.1016/j.jmrt.2025.02.048 ↗
14. Rhenium alloying strengthens a ductile refractory high entropy alloy10.1016/j.scriptamat.2024.116464 ↗
15. Enhanced microwave absorption performances of FeCoNiCuCr high entropy alloy by optimizing particle size dehomogenization10.1016/j.jallcom.2023.168822 ↗
16. Cryogenic strengthening of Fe27Co24Ni23Cr26 high-entropy alloys via hierarchical nanotwin-driven mechanism10.1016/j.msea.2024.146317 ↗
17. Effect of heat treatment temperature on the microstructure and mechanical properties of Cu0.3Cr2Fe2Ni3Mn2Nbx high-entropy alloys10.3390/coatings14080950 ↗
18. Effect of deep cryogenic treatment on the microstructure and mechanical properties of Al–Cu–Mg–Ag alloy10.1016/j.jmrt.2023.07.130 ↗
19. A cost-effective cryogenic high-entropy alloy with high strength-ductility synergy and strain hardenability10.1016/j.msea.2023.144607 ↗
20. A new strategy to overcome the strength-ductility trade off of high entropy alloy10.1016/j.scriptamat.2022.114678 ↗
21. Cryogenic mechanical behaviors of CrMnFeCoNi high-entropy alloy10.1016/j.msea.2020.139579 ↗
22. Cryogenic treatment of CoCrFeMnNi(NbC) high-entropy alloys10.1007/s11665-019-04439-8 ↗
23. Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment
24. The effect of cryogenic treatment on the microstructure and room-temperature mechanical properties of the (HEAp/Al) at different temperatures
25. Modification of FeCoNi1.5CrCuP/2024Al composites subject to improved aging treatments with cryogenic and magnetic field10.1016/j.jallcom.2023.171763 ↗
26. Role of various parameters in the formation of the physicomechanical properties of high-entropy alloys with BCC lattices10.1134/S0031918X18050046 ↗
27. Investigation on microstructure and properties of AlxCoCrFeMnNi high entropy alloys by ultrasonic impact treatment10.1016/j.jallcom.2019.152626 ↗
28. Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys10.1016/j.matdes.2016.07.073 ↗
29. Microstructure and property alterations and toughening mechanism of cast TC4 alloy by solid state treatment with low-density DC electric field10.1016/j.jmrt.2024.11.238 ↗
30. Dynamic compressive properties and microstructural evolution of Al1.19Co2CrFeNi1.81 eutectic high entropy alloy at room and cryogenic temperatures10.1016/j.matdes.2022.110724 ↗
31. High-throughput preparation and characterization of ZrMoTaW refractory multi-principal element alloy film10.3390/ma15238546 ↗
32. Influences of moisture content and compressive loading speed on the mechanical properties of maize grain orientations
33. Mechanism of magnetic fragmentation effect on mechanical properties of TiAl alloy modified by combined magnetic-thermal treatment
34. The tensile properties and serrated flow behavior of a thermomechanically treated CoCrFeNiMn high-entropy alloy10.1016/j.msea.2017.03.031 ↗
35. A review of friction stir processing of structural metallic materials: process, properties, and methods10.3390/met10060772 ↗
36. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
37. Dual heterogeneous structured medium-entropy alloys showing a superior strength-ductility synergy at cryogenic temperature10.1016/j.jmrt.2022.02.078 ↗
38. Analysis of mechanical properties for tea stem using grey relational analysis coupled with multiple linear regression
39. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
40. Cost-effective and facile route to ultrafine-microstructure high-entropy alloy for cryogenic applications10.1016/j.msea.2023.145408 ↗
41. Nanoprecipitate-strengthened high-entropy alloys10.1002/advs.202100870 ↗
42. Remarkable cryogenic strengthening and toughening in nano-coherent CoCrFeNiTi0.2 high-entropy alloys via energetically-tuning polymorphous precipitates10.1016/j.msea.2022.143111 ↗
43. Deformation microstructure and properties control of Cu-0.6 Cr alloy in cryo-equal channel angular pressing10.1007/s11771-023-5369-6 ↗
44. Twinning-assisted static recrystallization and texture evolution in a Mg-Gd-Y-Zr alloy10.1016/j.jmrt.2024.01.007 ↗
45. Phase transformation and dislocation behavior dependence on cooling rate in novel refractory high entropy alloy10.1016/j.msea.2023.145482 ↗
46. Twinning susceptibility of CrCoNi medium entropy alloy to cryogenic temperature during asymmetric rolling10.1016/j.jmrt.2022.08.045 ↗
47. Effect of cryogenic treatment on microstructure and mechanical properties of Al0. 6CrFe2Ni2 dual-phase high-entropy alloy10.3390/met13020195 ↗