Development and assessment of cement and concrete made of the burning of quinary by-product
Source abstract
Abstract
The aim of this study is to evaluate the usability of new cement (NC) made by the burning of quinary by-product to make commercial binders. Chemical analysis of the by-products and NC as well as X-ray diffraction (XRD) analysis of NC, fineness, density, consistency, and setting time of NC paste, and slump in addition to compressive strength (CS) and splitting tensile strength (STS) of NC concrete (NCC) were conducted. The results suggested that chemical composition of by-products is suitable to make NC binder. The NC contains Ca3SiO5, Ca2SiO5, Ca3Al2O6, and Ca3Al2FeO10. The particles passing through the 200 um Sieve were 56% compared with 52% for Portland cement (PC). The density of the of NC was similar to that of PC. The NC needed 48% more water than PC for normal consistency. The initial and final setting-time of NC was 105 min and 225 min respectively which is much higher than that of PC (15 and 45 min). The slump, compressive strength and splitting tensile strength were slightly lower for concrete containing NC compared with that pf PC concrete. Although the CS and STS of NCC are the lowest, the rate of the CS and STS gain of NCC is greater than that of PCC. It was concluded that NC is a viable alternative to PC for the production of greener concrete.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Materials Engineering and Processing · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. 2021
2. Properties of concrete containing high volumes of coal bottom ash as fine aggregate10.1016/j.jclepro.2014.12.026 ↗
3. Utilization of sieved and ground coal bottom ash powders as a coarse binder in high-strength mortar to improve workability10.1016/j.conbuildmat.2015.05.017 ↗
4. Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement10.1016/j.conbuildmat.2016.04.080 ↗
5. Notice of regulatory determination on wastes from the combustion of fossil fuels
6. 2021
7. Supporting environmentally sound decisions for waste management with LCT and LCA10.1007/s11367-011-0315-5 ↗
8. Lennon · 2005
9. Optimization of low-carbon footprint quaternary and quinary (37% fly ash) cementitious nanocomposites with polycarboxylate or aqueous nanosilica particles10.1155/2019/5931306 ↗
10. Supplementary cementitious materials: new sources, characterization, and performance insights10.1016/j.cemconres.2019.05.008 ↗
11. Supplementary cementitious materials origin from agricultural wastes – a review10.1016/j.conbuildmat.2014.10.010 ↗
12. Reusing marble and granite dust as cement replacement in cementitious composites: a review on sustainability benefits and critical challenges10.1016/j.jobe.2021.102600 ↗
13. Effect of partial substitution of corn straw fly ash for fly ash as supplementary cementitious material on the mechanical properties of cemented coal gangue backfill10.1016/j.conbuildmat.2021.122553 ↗
14. State of the art review on supplementary cementitious materials in India – I: an overview of legal perspective, governing organizations, and development patterns10.1016/j.jclepro.2020.121203 ↗
15. A huge number of artificial waste material can be supplementary cementitious material (SCM) for concrete production e a review part II10.1016/j.jclepro.2015.12.115 ↗
16. State-of-the-art review on the use of sugarcane bagasse ash in cementitious materials10.1016/j.cemconcomp.2021.103975 ↗
17. Incorporation of natural waste from agricultural and aquacultural farming as supplementary materials with green concrete: a review10.1016/j.compositesb.2019.107076 ↗
18. Recycling of municipal solid waste for cement production: pilot-scale test for transforming incineration ash of solid waste into cement clinker10.1016/S0921-3449(00)00077-X ↗
19. The use of municipal solid waste incineration ash in various building materials: a Belgian point of view10.3390/ma11010141 ↗
20. The use of natural calcined clays as a main constituent in cement
21. Cold-bonding process for treatment and reuse of waste materials: technical designs and applications of pelletized products
22. 2019 · 1
23. 2018 · 1
24. 2004 · 1
25. 2018 · 1
26. 1995 · 1
27. 2019 · 1
28. 2018 · 1
29. 2020 · 1
30. 2021 · 1
31. 2017 · 1
32. Potential of using industrial wastes for production of geopolymer binder as green construction materials10.1016/j.conbuildmat.2019.06.054 ↗
33. Assessment of waste packaging glass bottles as supplementary cementitious materials10.1016/j.conbuildmat.2018.06.119 ↗
34. 2019 · 1
35. Waste marble dust: an interesting residue to produce cement10.1016/j.conbuildmat.2019.07.031 ↗
36. Use of ultrafine marble and brick particles as raw materials in cement manufacturing10.1617/s11527-014-0368-6 ↗
37. The X-ray method applied to a study of the constitution of Portland cement10.6028/jres.005.051 ↗
38. Recherches Expérimentales sur la Constitution des Ciments et la Théorie de Leur Prise (Experimental Researches on the Constitution of Cements and the Theory of their Setting)
39. Le Châtelier · 1905
40. Die Petrographie des Portland-Cements
41. Role of particle fineness on engineering properties and microstructure of fly ash derived geopolymer10.1016/j.conbuildmat.2019.117294 ↗
42. Effect of fineness and calcium content of fly ash on the mechanical properties of Engineered Cementitious Composites (ECC)10.1016/j.conbuildmat.2019.03.129 ↗
43. Nicholas · 2014
44. Exploring the relation between the flow of mortar and specific surface area of its constituents10.1016/j.conbuildmat.2019.03.260 ↗
45. Particle packing and the rheology of concrete
46. Using particle packing technology for sustainable concrete mixture design
47. Alexander · 2010
48. De Larrard · 1999
49. Smart Nanoconcretes and Cement-Based Materials: section 3- Nano size particle packing for nanoconcretes and cement-based materials: mathematical models, theory, and technology