Optimized low-cycle fatigue behavior and fracture characteristics of Ti–6Al–4V alloy by Fe microalloying
Source abstract
Abstract
In the present work, low cycle fatigue (LCF) behavior and fracture characteristic of Ti–6Al–4V-0.55Fe alloy with bimodal microstructure, consisted of equiaxed primary α (αp), lamellar α (αl) and β matrix, are systematically investigated at room temperature. Results indicate that Ti–6Al–4V-0.55Fe alloy mainly exhibits a continuous softening behavior both at high and low strain amplitudes, due to the interaction of back stress(σb) and friction stress(σf) mainly related to the plastic deformation heterogeneity and precipitates shearing, respectively. Compared with Ti–6Al–4V alloy, LCF life of Ti–6Al–4V-0.55Fe is similar at high strain amplitudes (Δεt/2 > 1.0%), while much higher at low strain amplitudes (Δεt/2 < 1.0%), which could be attributed to the extra resistance to dislocation movement and crack propagation produced by Fe microalloying. The fractography shows remarkably different characteristics for these imposed strain amplitudes. At low strain amplitude, there is only one crack initiation site caused by dislocations pile-ups and stress concentration on the specimen surface, accompanied with narrower fatigue striation, while more cracks initiated on the surface with wider fatigue striation due to strain accumulation at high strain amplitudes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Prediction of dynamic globularization of Ti-17 titanium alloy with initial lamellar microstructure during hot compression10.1016/j.msea.2010.06.059 ↗
2. In-situ formed graded microporous structure in titanium alloys and its effect on the mechanical properties10.1016/j.matdes.2015.06.066 ↗
3. Effect of long term aging on the fatigue crack propagation in the β titanium alloy Ti 1710.1016/j.msea.2017.09.052 ↗
4. Luetjering · 2007
5. The present situation and development trend of titanium alloy and its application in ships
6. Effect of microstructure on the fatigue properties of Ti-6Al-4V titanium alloys10.1016/j.matdes.2012.10.059 ↗
7. Effect of microstructure on low cycle fatigue properties of TC4 ELI titanium alloy
8. An investigation of the effects of colony microstructure on fatigue crack growth in Ti-6Al-4V10.1016/S0921-5093(01)01014-0 ↗
9. Effects of β treatments on microstructures and mechanical properties of TC4-DT titanium alloy10.1016/j.msea.2011.11.033 ↗
10. The effect of microstructure on the mechanical properties of two-phase titanium alloys10.1016/S0924-0136(02)00248-0 ↗
11. Development and applications of titanium alloy SP-700 with high formability10.1520/JTE12683J ↗
12. On the influence of the heat treatment on microstructure formation and mechanical properties of near-α Ti-Fe alloys10.1016/j.msea.2018.12.071 ↗
13. Effect of Fe content on microstructure evolution and mechanical properties of as-cast Ti-xFe-B alloy
14. The effects of the α/β phase proportion on the superplasticity of Ti-6Al-4V and iron-modified Ti-6Al-4V10.1016/0921-5093(92)90342-X ↗
15. Effect of Fe content on mechanical properties ofTi-6Al-4V alloy
16. Research and application of high strength and high toughness titanium alloys
17. Hot deformation behavior of Fe-microalloyed Ti-6Al-4V based on experiments and calculations
18. Improved fracture toughness by microalloying of Fe in Ti-6Al-4V10.1016/j.matdes.2019.108251 ↗
19. Microstructure and fracture toughness of the aged ,β-Ti Alloy Ti-10V-2Fe-M10.1007/BF02628388 ↗
20. Low cycle fatigue behavior of Ti alloy IMI 834 at room temperature10.1016/S0921-5093(01)01468-X ↗
21. The effects of texture and extension twinning on the low-cycle fatigue behavior of a rolled magnesium alloy, AZ31B10.1016/j.msea.2010.07.047 ↗
22. Low-cycle fatigue behavior and property of TA15 titanium alloy with tri-modal microstructure10.1016/j.msea.2018.08.080 ↗
23. A study of the back stress and the friction stress behaviors of Ti-6Al-4V alloy during low cycle fatigue at room temperature10.1016/j.msea.2017.06.051 ↗
24. Fatigue behavior of Ti-6Al-4V ELI including mean stress effects10.1016/j.ijfatigue.2017.02.013 ↗
25. Observations on microstructurally sensitive fatigue crack growth in a widmansttten Ti-6Al-4V alloy10.1007/BF02646877 ↗
26. Cyclic deformation response and micromechanisms of Ti alloy Ti-5Al-5V-5Mo-3Cr-0.5Fe10.1016/j.msea.2011.08.045 ↗
27. Role of processing parameters in the development of tri-modal microstructure during isothermal local loading forming of TA15 titanium alloy10.1016/j.jmatprotec.2016.08.015 ↗
28. Cyclic softening of the Ti-10V-2Fe-3Al titanium alloy10.1016/S0921-5093(96)10531-1 ↗
29. Effect of microstructure on high cycle fatigue behavior of Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy10.1016/j.ijfatigue.2016.09.005 ↗
30. Cyclic deformation behaviour of an α/β titanium alloy-I. Micromechanisms of plasticity under various loading paths10.1016/S1359-6454(96)00406-5 ↗
31. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: Back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗
32. Low cycle fatigue behavior of an α + β titanium alloy: Ti624610.1016/0921-5093(93)90423-C ↗
33. Cyclic softening in alpha-titanium10.1016/0036-9748(72)90053-1 ↗
34. Cottrell · 1953
35. Multiaxial low cycle fatigue life of Ti-6Al-4V under non-proportional loading with mean strain10.1016/j.tafmec.2017.04.004 ↗
36. Slip transfer across phase boundaries in dual phase titanium alloys and the effect on strain rate sensitivity10.1016/j.ijplas.2018.01.011 ↗
37. Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use10.1016/j.ijfatigue.2008.08.007 ↗
38. Multiscale phenomena in fatigue of ultra-fine grain materials-an overview10.2320/matertrans.42.74 ↗