Investigation on microstructure and mechanical properties of hot-rolled AZ31 Mg alloy with various cryogenic treatments
Source abstract
Abstract
AZ31 Mg alloy sheet, prepared by a novel process combining hot rolling and various cryogenic treatments, has been investigated on its microstructure and mechanical properties. The results show that twins and the Al8Mn5 phase were introduced in the sample with rapid cooling and rapid heating and slow heating and slow cooling, which can significantly impede the movement of dislocations, while twins also can effectively coordinate deformation. Compared to the conventional hot rolling sample, the average grain size and texture strength of the cryogenic treatment samples were refined and increased by ∼24% and∼50%, respectively. The dislocation density of the coarse-grained region in the sample with slow heating and slow cooling is low, and the prismatic and pyramid slips were activated, which can improve the ductility of the alloy. In comparison to conventional hot rolling, the ultimate tensile strength and elongation of AZ31 Mg alloy after rapid cooling and rapid heating were increased by ∼15% and ∼37%, respectively, while the elongation after slow heating and slow cooling increased by ∼71%. The improvement of the mechanical properties of Mg alloy with cryogenic treatment is attributed to the synergistic effect of the refined grain, twins, residual dislocations, precipitates, texture and non-basal slip.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Tribological response of binary Mg-xZn (Where X = 1, 3 and 6 wt%) alloys10.1016/j.matpr.2020.08.467 ↗
2. Effect of twinning behavior on dynamic recrystallization during extrusion of AZ31 Mg alloy10.1007/s11837-019-03336-8 ↗
3. New insights on the different corrosion mechanisms of Mg alloys with solute-enriched stacking faults or long period stacking ordered phase10.1016/j.corsci.2022.110163 ↗
4. Crack behavior in Mg/Al alloy thin sheet during hot compound extrusion10.1016/j.jma.2019.09.006 ↗
5. Developing a low-alloyed fine-grained Mg alloy with high strength-ductility based on dislocation evolution and grain boundary segregation10.1016/j.scriptamat.2021.114414 ↗
6. Effects of pre-aging on microstructure evolution and deformation mechanisms of hot extruded Mg-6Zn-1Gd-1Er Mg alloys
7. Effects of cryogenic treatment on microstructure and mechanical properties of AZ31 magnesium alloy rolled at different paths10.1016/j.msea.2021.142475 ↗
8. An experimental and theoretical investigation of the effect of second-phase particles on grain growth during the annealing of hot-rolled AZ61 magnesium alloy10.1016/j.jmrt.2021.09.049 ↗
9. Hot deformation behavior and processing map of a new type Mg-6Zn-1Gd-1Er alloy10.1016/j.jallcom.2021.158700 ↗
10. Effects of annealing treatment on the microstructure and corrosion behavior of hot rolled AZ31 Mg alloy10.1016/j.jmrt.2021.10.099 ↗
11. The microstructure evolution, texture weakening mechanism and mechanical properties of AZ80 Mg alloy processed by repetitive upsetting-extrusion with reduced deformation temperature10.1016/j.jallcom.2021.160871 ↗
12. Effects of cryogenic treatment on microstructures and mechanical properties of Mg-2Nd-4Zn alloy10.1016/j.matlet.2021.130699 ↗
13. Influence of AZ31 sheet treated by cryogenic on punch shearing10.1007/s11771-019-4114-7 ↗
14. Deep cryogenic treatment of HPDC AZ91 magnesium alloys prior to aging and its influence on alloy microstructure and mechanical properties10.1016/j.jmatprotec.2016.08.029 ↗
15. Effect of cryogenic rolling process on microstructure and mechanical properties of Mg-14Li-1Al alloy10.1016/j.matchar.2019.109903 ↗
16. Influence of cryogenic temperatures on the microstructure and mechanical properties of magnesium alloys: a review10.3390/met7020038 ↗
17. Effect of cryogenic treatment prior to rolling on microstructure and mechanical properties of AZ31 magnesium alloy10.1016/S1875-5372(18)30215-7 ↗
18. Research progress on cryogenic treatment technology of metal materials
19. Effect of thickness on the thermal conductivity and microstructure of die-cast AZ91D magnesium alloy10.1007/s11661-019-05473-w ↗
20. Microstructure and texture evolution during the direct extrusion and bending-shear deformation of AZ31 magnesium alloy10.1007/s40195-018-0848-8 ↗
21. Microstructural characteristics of AZ31 alloys rolled at room and cryogenic temperatures and their variation during annealing10.1016/j.jma.2020.03.003 ↗
22. Unveiling annealing texture formation and static recrystallization kinetics of hot-rolled Mg-Al-Zn-Mn-Ca alloy10.1016/j.jmst.2020.01.018 ↗
23. Microstructure, texture and mechanical properties of Mg-Gd-Y-Zr alloy annular forging processed by hot ring rolling10.1016/j.msea.2017.02.036 ↗
24. Microstructure and mechanical property of multi-pass low-strain rolled Mg-Al-Zn-Mn alloy sheet10.1016/j.jallcom.2020.155228 ↗
25. Influence of cryogenic treatment on room and low temperature tensile behavior of as-cast Mg-10Gd-3Y-0.5Zr magnesium alloy10.1557/jmr.2016.38 ↗
26. Microstructural evolution and its implications on the mechanical properties during age hardening in Mg-1Al-0.28Ca-0.13Mn-0.05Si alloy10.1016/j.jallcom.2020.158540 ↗
27. Quantitative assessment of second phase particles characteristics and its role on the deformation response of a Mg-8Al-0.5Zn alloy10.1016/j.msea.2019.05.052 ↗
28. Microstructure and mechanical properties of AZ91 magnesium alloy subject to deep cryogenic treatments10.1007/s12613-013-0812-6 ↗
29. Effect of cryogenic treatment on the microstructure and mechanical properties of AZ31 magnesium alloy10.1080/10426910903496862 ↗
30. Microstructure, texture and mechanical properties of the rolled high modulus Mg-Y-Zn-Al-Li alloy10.1016/j.msea.2021.142242 ↗
31. Achieving exceptionally high strength in binary Mg-13Gd alloy by strong texture and substantial precipitates10.1016/j.scriptamat.2020.10.052 ↗
32. Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength10.1016/j.actamat.2018.03.002 ↗
33. Effect of solutes on strength and ductility of Mg alloys10.1016/j.actamat.2019.09.018 ↗
34. Fine-grained Mg-1Mn-0.5A-0.5Ca-0.5Zn alloy with high strength and good ductility fabricated by conventional extrusion10.1016/S1003-6326(22)65809-6 ↗
35. Strength-ductility combination of fine-grained magnesium alloy with high deformation twin density10.1016/j.jallcom.2019.05.260 ↗
36. Managing strength and ductility in AZ91 magnesium alloy through ECAP combined with prior and post aging treatment10.1016/j.matchar.2019.04.022 ↗
37. Grain refinement and weak-textured structures based on the dynamic recrystallization of Mg-9.80Gd-3.78Y-1.12Sm-0.48Zr alloy10.1016/j.jma.2020.06.001 ↗
38. A simultaneous enhancement of both strength and ductility by a novel differential-thermal ECAP process in Mg-Sn-Zn-Zr alloy10.1016/j.jallcom.2021.161653 ↗
39. Slip mode dependency of dislocation shearing and looping of precipitates in Mg alloy WE4310.1016/j.actamat.2017.12.043 ↗
40. Strengthening effect of nano-scale precipitates in a die-cast Mg-4Al-5.6Sm-0.3Mn alloy10.1016/j.jallcom.2016.01.048 ↗
41. Strengthening effect of extruded Mg-8Sn-2Zn-2Al alloy: influence of micro and nano-size Mg2Sn precipitates10.3390/ma10070822 ↗
42. Role of second phases and grain boundaries on dynamic recrystallization behavior in ZK60 magnesium alloy10.1016/j.jallcom.2020.157958 ↗
43. Improved tensile properties of an equal channel angular pressed (ECAPed) Mg-8Sn-6Zn-2Al alloy by prior aging treatment10.1016/j.msea.2017.01.054 ↗
44. Effect of forging on microstructure, texture, and uniaxial properties of cast AZ31B alloy10.1007/s11665-017-2743-2 ↗
45. Dynamic recrystallization behavior and microstructure evolution of a new Mg-6Zn-1Gd-1Er alloy with and without pre-aging treatment10.1016/j.matchar.2021.111506 ↗
46. Enhanced plasticity at cryogenic temperature in a magnesium alloy10.1016/j.msea.2021.141001 ↗
47. Effects of calcium on the activity of slip systems in AZ31 magnesium alloy10.1016/j.msea.2018.10.060 ↗
48. Mechanistic investigation of a low-alloy Mg-Ca-based extrusion alloy with high strength-ductility synergy10.1016/j.actamat.2020.01.017 ↗
49. Activation of non-basal slip in multicomponent Mg alloys10.1016/j.jma.2021.03.007 ↗
50. The origin of activation of non-basal slip in Mg-Ce dilute alloy: an atomistic simulation study10.1007/s11661-020-06128-x ↗