Secondary dendritic arm spacing and cooling rate relationship for an ASTM F75 alloy
Source abstract
Abstract
The solidification evolution of an ASTM F75 alloy was studied for samples quenched during directional cooling. These samples were obtained using five extraction rates (1.2–18 mm/min) and two temperature gradients (6 and 12 K/mm), leading to a 25-fold change in the cooling rate (0.13–3.31 K/s). The solidification range for this alloy is observed to be approximately 200 °C. The solid grows more rapidly in the first 100 °C of this interval, where a solid fraction of approximately 0.8–0.9 is reached. Coarsening of the Secondary Dendrite Arm Spacing, SDAS, occurs mainly during this growth period. This behavior defines an effective temperature interval for the SDAS coarsening instead of the whole solidification interval. Consideration of this effective temperature interval enables us to reconcile the measured SDAS-cooling rate relationship with that obtained from the data for the cast samples. A model of the SDAS coarsening during anisothermal solidification of multicomponent alloys is proposed. The predictions of this model compare well with the present experimental results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solidification and crystal growth phenomena · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. 1995 · 13.01
2. Failures of metallic orthopedic implants
3. Microstructural characterization of as-cast biocompatible Co–Cr–Mo alloys10.1016/j.matchar.2010.10.011 ↗
4. Assessment of precipitation behavior in dental castings of a Co–Cr–Mo alloy10.1016/j.jmbbm.2015.06.020 ↗
5. Precipitation path of secondary phases during solidification of the Co-25.5%Cr-5.5%Mo-0.26%C alloy10.1016/S1359-6462(02)00305-6 ↗
6. 1960
7. Solution treatment behavior of Co-Cr-Mo alloy10.1002/jbm.820130208 ↗
8. Effect of heat treatment upon microstructures microconstituents and hardness of a wrought cobalt-base alloy
9. A transmission electron microscopy study of the mechanisms of strengthening in heat-treated Co-Cr-Mo-C alloys10.1007/BF02642835 ↗
10. Carbide reactions in high temperature alloys
11. Heat treatment of cast Co-Cr-Mo for orthopaedic implant use10.1007/BF00560627 ↗
12. On carbide dissolution in an as-cast ASTM F-75 alloy10.1002/jbm.10001 ↗
13. Microstructure of as-cast Co-Cr-Mo alloy prepared by investment casting10.3938/jkps.72.947 ↗
14. Microstructural and mechanical characterization of as-cast Co-Cr-Mo alloys with various content of carbon and nitrogen10.4028/www.scientific.net/MSF.988.206 ↗
15. Effects of Si concentrations on microstructure and mechanical properties of as-cast Co–Cr–Mo alloys10.1088/1757-899X/635/1/012006 ↗
16. The effect of induction heating power on the microstructural and physical properties of investment cast ASTM-F75 CoCrMo alloy10.1016/j.jmrt.2019.07.052 ↗
17. The effect of melt temperature on the mechanical properties of cast ASTM F75 CoCrMo alloy as explained by nitrogen and oxygen content10.1016/j.jmrt.2020.06.079 ↗
18. The effect of cooling rate on the microstructure and hardness of as-cast Co-28Cr-6Mo alloy used as biomedical knee implant10.1007/s40962-021-00749-7 ↗
19. Numerical simulation and defect identification in the casting of Co-Cr alloy10.3390/met12020351 ↗
20. Dendrite arm spacing in aluminum alloys
21. Flemings · 1974
22. Kurz · 1998
23. Effect of cooling rate on macro- and microstructure of thin-walled nickel superalloy precision castings10.1016/j.jmapro.2019.11.028 ↗
24. Effect of cooling rate on the grain refinement of Mg-Y-Zr alloys10.1007/s11661-019-05497-2 ↗
25. On morphologies, microsegregación, and mechanical behavior of directionally solidified cobalt-base superalloy at medium cooling rate10.1007/BF02651605 ↗
26. Analyzing unidirectional solidification for a Co-Cr-Mo biomedical alloy by FEA10.1007/BF03222887 ↗
27. Relationship between cooling rate and SDAS in liquid phase separated metastable Cu–Co alloys10.1016/j.jallcom.2021.160823 ↗
28. Evaluation of stellite coatings by μ-PTA powder, laser, and PTA deposition processes10.1080/10426914.2017.1364764 ↗
29. Transparent compounds that freeze like metals10.1016/0001-6160(65)90061-1 ↗
30. Pattern formation during the directional solidification of binary systems10.1016/0001-6160(85)90199-3 ↗
31. In situ and real time investigation of directional solidification of Al - Ni alloys by synchrotron imaging10.4028/www.scientific.net/MSF.508.75 ↗
32. In situ study of nucleation and growth of the irregular α-Al/β-Al 5 FeSi eutectic by 3-D synchrotron X-ray microtomography10.1016/j.actamat.2010.06.012 ↗
33. The evolution of interfacial morphology during coarsening: a comparison between 4D experiments and phase-field simulations10.1016/j.scriptamat.2010.10.040 ↗
34. The dynamics of interfaces during coarsening in solid–liquid systems10.1016/j.actamat.2014.01.024 ↗
35. 4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification10.1016/j.actamat.2016.07.002 ↗
36. Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of MgSn alloys10.1016/j.actamat.2016.07.047 ↗
37. Influence of gravity level on Columnar-to-Equiaxed Transition during directional solidification of Al – 20 wt.% Cu alloys10.1016/j.actamat.2016.03.007 ↗
38. Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography10.1016/j.actamat.2016.10.022 ↗
39. General evolution equation for the specific interface area of dendrites during alloy solidification10.1016/j.actamat.2017.08.021 ↗
40. Modelling of secondary dendrite arms evolution during solidification by a phase-field method10.1016/j.matpr.2015.05.063 ↗
41. Cellular automaton simulation of three-dimensional dendrite growth in Al–7Si–Mg ternary aluminum alloys10.1016/j.commatsci.2015.04.035 ↗
42. Influence of coarsening on dendrite arm spacing of aluminum-copper alloys
43. A simple model for dendrite arm coarsening during solidification10.1016/0025-5416(85)90319-2 ↗
44. On the rate of dendrite arm coarsening10.1007/BF02656824 ↗
45. Models for the isothermal coarsening of secondary dendrite arms in multicomponent alloys10.1007/s11663-997-0074-7 ↗
46. Influence of the chemical composition of nickel-base superalloys on their solidification behavior and foundry performance
47. Wrought heat-resistant alloys
48. The Thermo-Calc databank system10.1016/0364-5916(85)90021-5 ↗
49. 1992
50. Effects of solidification-conditions on austenitic stainless-steel solidification-mode10.1016/0022-0248(88)90216-3 ↗
51. Castro-Roman · 2007 · 311
52. Phase identification and incipient melting in a cas Co-Cr surgical implant alloy10.1002/jbm.820160109 ↗
53. π-Phase and χ-phase: new precipitates in biomedical Co–Cr–Mo alloys
54. Cooling rate and carbon content effect on the fraction of secondary phases precipitate in as-cast microstructure of ASTM F75 alloy10.1016/j.jmatprotec.2008.04.039 ↗
55. On dendritic solidification of multicomponent alloys with unequal liquid diffusion coefficients10.1016/S1359-6454(99)00188-3 ↗
56. On secondary dendrite arm coarsening in peritectic solidification10.1016/j.msea.2004.07.032 ↗
57. Dendrite coarsening in directionally solidified Sn–36 at.%Ni peritectic alloy in the presence of the migration of secondary dendrite arms10.1016/j.matchemphys.2014.02.003 ↗
58. On an expression for the growth of secondary dendrite arm spacing during non-equilibrium solidification of multicomponent alloys: validation against ternary aluminum-based alloys10.1016/j.jmapro.2018.08.010 ↗
59. Propriétés du cobalt et de ses alliages
60. Solid-liquid interface energy of metals at melting point and undercooled state10.2320/matertrans.43.721 ↗
61. Correlations between surface and interface energies with respect to crystal nucleation10.1006/jcis.2002.8627 ↗
62. Interdendritic spacing: Part I. Experimental studies10.1007/BF02644688 ↗
63. Growth conditions at the solidification front of multicomponent alloys10.1016/0956-716X(93)90222-E ↗