Three-dimensional microstructure evolution of Ti–6Al–4V during multi-layer printing: a phase-field simulation
Source abstract
Abstract
Remelting and grain growth in deposited layers and the columnar-to-equiaxed transition (CET) have a significant impact on microstructural evolution during the multilayer printing process. A three-dimensional phase-field model incorporating a heterogeneous nucleation model was developed to study the microstructural evolution under different scanning strategies and scanning velocities during directed energy deposition (DED) additive manufacturing. An experiment was performed to validate the predicted grain morphologies using the proposed model. The results indicate that undercooling determines the extent of heterogeneous nucleation and controls the CET. In comparison with constitutional undercooling and curvature undercooling, thermal undercooling contributes more to the DED of Ti–6Al–4V. The maximum undercooling occurs on the top layer leading to a higher ratio of equiaxed grain formation. The undercooling increases with the build height, which is beneficial for the CET. The growth direction of the columnar grains is controlled by the size and shape of the melt pool. The bidirectional scanning strategy leads to bent columnar grains as a result of the changing growth direction between adjacent deposited layers. The decrease in the scanning velocity leads to coarsening of the grains.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
2. Metallurgy, mechanistic models and machine learning in metal printing10.1038/s41578-020-00236-1 ↗
3. Multiscale and multiphysics explorations of the transient deposition processes and additive characteristics during laser 3D printing10.1016/j.jmst.2020.11.032 ↗
4. Mechanistic models for additive manufacturing of metallic components
5. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
6. Grain structure evolution in transition-mode melting in direct energy deposition10.1016/j.matdes.2020.108919 ↗
7. An integrated process–structure–property modeling framework for additive manufacturing10.1016/j.cma.2018.05.004 ↗
8. Integration of phase-field model and crystal plasticity for the prediction of process-structure-property relation of additively manufactured metallic materials10.1016/j.ijplas.2020.102670 ↗
9. Additive manufacturing of ultrafine-grained high-strength titanium alloys10.1038/s41586-019-1783-1 ↗
10. Three-dimensional modeling of the microstructure evolution during metal additive manufacturing10.1016/j.commatsci.2017.09.018 ↗
11. Simulation-informed laser metal powder deposition of Ti-6Al-4V with ultrafine α-β lamellar structures for desired tensile properties
12. Microstructure formation of Ti-6Al-4 V in synchronous induction assisted laser deposition10.1016/j.matdes.2018.11.008 ↗
13. Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition10.1016/j.matlet.2016.05.038 ↗
14. Heat-affected coarsening of β grain in titanium alloy during laser directed energy deposition10.1016/j.scriptamat.2021.114180 ↗
15. A coupled finite element cellular automaton model to predict thermal history and grain morphology of Ti-6Al-4V during direct metal deposition (DMD)
16. Controlling the solidification process parameters of direct energy deposition additive manufacturing considering laser and powder properties10.1016/j.commatsci.2020.109788 ↗
17. Numerical simulation of powder effect on solidification in directed energy deposition additive manufacturing10.1016/S1003-6326(21)65700-X ↗
18. Phase field simulation of powder bed-based additive manufacturing10.1016/j.actamat.2017.11.033 ↗
19. Investigation on evolution mechanisms of site-specific grain structures during metal additive manufacturing10.1016/j.jmatprotec.2018.02.042 ↗
20. Insight into the mechanisms of columnar to equiaxed grain transition during metallic additive manufacturing
21. Electromagnetic wave-based analysis of laser–particle interactions in directed energy deposition additive manufacturing
22. Li · 2021
23. Effect of interface anisotropy on growth direction of tilted dendritic arrays in directional solidification of alloys: insights from phase-field simulations10.1016/j.ijheatmasstransfer.2016.08.096 ↗
24. Phase-field-model-based analysis of the effects of powder particle on porosities and densities in selective laser sintering additive manufacturing10.1016/j.ijmecsci.2019.105230 ↗
25. 3D non-isothermal phase-field simulation of microstructure evolution during selective laser sintering10.1038/s41524-019-0219-7 ↗
26. Insights from a minimal model of dislocation-assisted rafting in single crystal Nickel-based superalloys10.1016/j.scriptamat.2016.05.032 ↗
27. Computer simulation of 3-D grain growth using a phase-field model10.1016/S1359-6454(02)00084-8 ↗
28. An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals10.1016/j.cma.2014.12.007 ↗
29. Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening10.1038/s41524-021-00524-6 ↗
30. Mohebbi · 2020
31. Kurz · 1998
32. Dendrite growth simulation during solidification in the LENS process10.1016/j.actamat.2009.10.053 ↗
33. Phase-field simulation of microstructure evolution of Ti–6Al–4V in electron beam additive manufacturing process
34. Determination of the thermophysical properties of liquid and solid Ti–6Al–4V alloy10.1007/s00339-016-9783-6 ↗
35. Experimental and numerical study of frictional heating during rapid interactions of a Ti6Al4V tribopair10.1016/j.wear.2015.09.013 ↗
36. GPU-accelerated three-dimensional large-scale simulation of dendrite growth for Ti6Al4V alloy based on multi-component phase-field model10.1016/j.commatsci.2018.12.051 ↗
37. Determination of melt pool dimensions using DOE-FEM and RSM with process window during SLM of Ti6Al4V powder10.1016/j.optlastec.2018.01.013 ↗
38. The effect of bulk nucleation parameters on the formation of macroscopic grain of the large-scale titanium slab ingot during EBCHM10.1080/02670836.2018.1466944 ↗
39. Determination and controlling of grain structure of metals after laser incidence: theoretical approach10.1038/srep41527 ↗
40. Three-dimensional grain growth during multi-layer printing of a nickel-based alloy Inconel 718
41. Solidification microstructure simulation of Ti-6Al-4V in metal additive manufacturing: a review
42. Mohanty · 2017
43. Numerical investigation of effects of nucleation mechanisms on grain structure in metal additive manufacturing10.1016/j.commatsci.2018.06.019 ↗
44. A physics-informed machine learning method for predicting grain structure characteristics in directed energy deposition10.1016/j.commatsci.2021.110958 ↗
45. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites10.1016/j.optlastec.2016.04.009 ↗
46. Grain size evolution under different cooling rate in laser additive manufacturing of superalloy10.1016/j.optlastec.2019.105662 ↗