Effect of Sn addition on the mechanical properties and high-temperature oxidation resistance of intermetallic TiAl alloys by first principles study and experimental investigation
Source abstract
Abstract
Tin (Sn) can be used as an effective TiAl powder sintering aid, but it is unclear whether Sn will deteriorate its properties as a micro-alloyed element in TiAl intermetallic. This work focuses on the influence of Sn on the mechanical properties and oxidation resistance of TiAl alloys. The effect of Sn on the mechanical properties of TiAl alloys is investigated by experiments and first-principles calculations. Sn atoms preferentially occupy the Al sites in γ-TiAl alloys and increase the lattice volume, which is consistent with the XRD pattern. The elastic constants of TiAl alloys with different Sn contents are also systematically presented. It is found that 1.85 at.% Sn addition improves the ductility of TiAl, but a higher Sn content reduces the ductility. This result is also verified by room temperature compression test. The density of states is also used to prove the ductility improvement of TiAl alloys with a certain amount of Sn. Last, the diffusion barrier of O and Al/Ti–O bond strength were calculated to evaluate the oxidation resistance of TiAl–Sn alloys. The addition of Sn markedly increases the O diffusion barrier and Al–O bond force constant, indicating that Sn can improve the oxidation resistance of TiAl alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
2. Formation and temporal evolution of modulated structure in high Nb-containing lamellar γ-TiAl alloy10.1016/j.actamat.2018.11.041 ↗
3. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
4. Processing maps for hot working behavior of a PM TiAl alloy10.1016/S1005-0302(11)60161-8 ↗
5. Hot working behavior and processing map of a γ-TiAl alloy synthesized by powder metallurgy10.1016/j.matdes.2011.06.003 ↗
6. Cobalt-doped Ti–48Al–2Cr–2Nb alloy fabricated by cold compaction and pressureless sintering10.1016/j.msea.2013.03.023 ↗
7. Prospects for metal injection moulding using a gamma titanium aluminide based alloy powder10.1016/S0921-5093(01)01544-1 ↗
8. Microstructure and mechanical properties of high Nb containing TiAl alloy parts fabricated by metal injection molding10.1016/j.msea.2009.07.003 ↗
9. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
10. Effect of Sn addition on TiAl based alloys
11. Effects of Sn additions on the microstructures and tensile properties of two-phase TiAl alloys10.1016/0966-9795(95)00034-8 ↗
12. Sintering densification, microstructure and mechanical properties of Sn-doped high Nb-containing TiAl alloys fabricated by pressureless sintering10.1016/j.intermet.2020.106891 ↗
13. Effect of Sn addition on densification and mechanical properties of sintered TiAl base alloys
14. The sintering densification, microstructure and mechanical properties of Ti–48Al–2Cr–2Nb by a small addition of Sn–Al powder10.1016/j.jmrt.2021.11.096 ↗
15. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗
16. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
17. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
18. Enhancing adhesion of Al2O3 scale on Ti-Al intermetallics by alloying: a first principles study
19. Improved tangent estimate in the nudged elastic band method for finding minimum energy paths and saddle points
20. A climbing image nudged elastic band method for finding saddle points and minimum energy paths
21. Structural stability, mechanical properties and stacking fault energies of TiAl3 alloyed with Zn, Cu, Ag: first-principles study10.1016/j.jallcom.2016.01.106 ↗
22. Phase stability, mechanical properties and electronic structure of TiAl alloying with W, Mo, Sc and Yb: first-principles study10.1016/j.jallcom.2015.10.270 ↗
23. First-principles study of Be content on the structural and mechanical properties of TiAl alloy10.1016/j.jallcom.2008.07.031 ↗
24. A first principles study of the influence of alloying elements on TiAl: site preference10.1016/S0966-9795(99)00164-8 ↗
25. First—principles investigation on site substitution of 5d transition metals in γ-TiAl alloy (in Chinese)
26. Ab initio pseudopotential calculations on the effect of Mn doped on lattice parameters of L10 TiAl10.1016/S0966-9795(99)00161-2 ↗
27. Density functional theory for calculation of elastic properties of orthorhombic crystals: application to TiSi210.1063/1.368733 ↗
28. A simplified method for calculating the debye temperature from elastic constants10.1016/0022-3697(63)90067-2 ↗
29. Synthesis and design of superhard materials10.1146/annurev.matsci.31.1.1 ↗
30. Computational alchemy: the search for new superhard materials10.1557/S0883769400031420 ↗
31. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
32. A family of ductile intermetallic compounds10.1038/nmat958 ↗
33. B2 precipitates and distribution of W in a Ti–47Al–2W–0.5Si alloy10.1016/S0966-9795(02)00043-2 ↗
34. Phase stability, mechanical properties and electronic structures of TiAl binary compounds by first principles calculations10.1016/j.matchemphys.2018.09.055 ↗
35. Electronic effect on the ductility of alloyed TiAl compound10.1016/0956-7151(90)90131-Y ↗
36. Effects of Fe, Co and Ni elements on the ductility of TiAl alloy10.1016/j.jallcom.2014.07.199 ↗
37. On the growth of Al2O3 scales10.1016/j.actamat.2013.07.024 ↗
38. First-principles study of influence of Ti vacancy and Nb dopant on the bonding of TiAl/TiO2 interface10.1016/j.intermet.2014.01.001 ↗
39. Investigation on effects of alloying on oxidation resistance of γ-TiAl by using first principle10.3724/SP.J.1037.2012.00694 ↗
40. Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy10.1016/j.actamat.2018.02.013 ↗
41. Synergistic effect of B and Y on the isothermal oxidation behavior of TiAl-Nb-Cr-V alloy10.1016/j.corsci.2017.12.013 ↗