journal article·2023-03Open access

Fabrication, microstructure and properties of Ti3C2Tx MXene nanosheets reinforced Cu composites

Junhong Jia, Zhao Hou, Nairu He, Leping Cai, Junjie Hui

Abstract

Dispersed Ti3C2Tx MXene particle with various mass contents reinforced Cu matrix composites were fabricated by ball-mill mixing and hot pressing sintering. The effect of Ti3C2Tx incorporation on the microstructure, mechanical properties and tribological properties of the Cu–Ti3C2Tx composites was investigated. The results show that the sintered Cu–Ti3C2Tx composites consisted of Ti3C2Tx, Cu and small amount of TiC phase, which derived from Ti3C2Tx during the sintering process. The microhardness of Cu–Ti3C2Tx composites was increases with the increase of Ti3C2Tx content, reaching almost twice as much as that of pure Cu with 15 wt% of Ti3C2Tx. The tensile strength of the composite added 3 wt% Ti3C2Tx increased to 202 MPa, 16% higher than that of pure Cu (174 MPa), which was mainly attributed to the strengthening effect of Ti3C2Tx and TiC. Simultaneously, the addition of Ti3C2Tx can effectively improve the tribological properties of Cu matrix. The Cu-15 wt% Ti3C2Tx composites registered the lowest friction coefficient and wear rate of 0.27 and 4 × 10−5 mm3 N−1 m−1, respectively, which is attributed to the formation of easy-to-shear Ti3C2Tx lubricating film on the worn surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Effectively mitigated macro-segregation and improved tensile properties of twin-roll casting Al-Cu strips via the addition of TiC nanoparticles10.1016/j.jmatprotec.2021.117200 ↗
2. A multiphase strengthened Cu-Nb-Si alloy with high strength and high conductivity10.1016/j.matchar.2021.111565 ↗
3. Enhanced grain refinement and mechanical properties of a high-strength Al-Zn-Mg-Cu-Zr alloy induced by TiC nano-particles10.1016/j.msea.2021.140852 ↗
4. Friction and wear behavior of copper-graphite composites with different compositions in water environments10.1002/slct.202004491 ↗
5. The effect of milling and sintering techniques on mechanical properties of Cu-graphite metal matrix composite prepared by powder metallurgy route10.1016/j.jallcom.2013.03.122 ↗
6. Tribological behavior of self lubricating Cu/MoS2 composites fabricated by powder metallurgy10.1016/S1003-6326(18)64729-6 ↗
7. Tribological behavior of copper-molybdenum disulfide composites10.1016/j.wear.2017.05.006 ↗
8. Fabrication of in-situ grown graphene reinforced Cu matrix composites
9. Preparation mechanism of hierarchical layered structure of graphene/copper composite with ultrahigh tensile strength10.1016/j.carbon.2017.10.095 ↗
10. Enhanced strength in bulk graphene-copper composites10.1002/pssa.201330051 ↗
11. Intercalation and delamination of layered carbides and carbonitrides10.1038/ncomms2664 ↗
12. Two-dimensional nanocrystals produced by exfoliation of Ti3AlC210.1002/adma.201102306 ↗
13. Synthesis of two-dimensional Ti3C2Tx MXene using HCl+LiF etchant: enhanced exfoliation and delamination10.1016/j.jallcom.2016.10.127 ↗
14. Two-dimensional Ti3C2 coating as an emerging protective solid-lubricant for tribology10.1016/j.ceramint.2018.07.309 ↗
15. Clipping electron transport and polarization relaxation of Ti3C2Tx based10.1016/j.carbon.2022.09.043 ↗
16. Nature-inspired 3D hierarchical structured “vine” for efficient microwave attenuation and electromagnetic energy conversion device
17. Flexible and conductive MXene films and nanocomposites with high capacitance10.1073/pnas.1414215111 ↗
18. MXene-based chemical gas sensors: recent developments and challenges
19. Elastic properties of 2D Ti3C2Tx MXene monolayers and bilayers
20. Emerging applications of MXene materials in CO2 photocatalysis
21. Achieving parallelly-arranged Ti3C2Tx in epoxy coating for anti-corrosive/wear high-efficiency protection10.1016/j.compositesb.2021.109581 ↗
22. Preparation and properties of Cu/RGO composites via H2 reduction and spark plasma sintering10.1016/j.jallcom.2022.164654 ↗
23. Amino-functionalized Ti3C2Tx with anti-corrosive/wear function for waterborne epoxy coating10.1016/j.jmst.2020.05.002 ↗
24. Ti3C2Tx (MXene)-polyacrylamide nanocomposite films10.1039/C6RA10384G ↗
25. Significance of constructed MXene@Ag hybrids for enhancing the mechanical and tribological performance of epoxy composites10.1016/j.triboint.2021.107328 ↗
26. Excellent tribological properties of epoxy-Ti3C2 with three-dimensional nanosheets composites10.1007/s40544-020-0368-1 ↗
27. In-situ formation of tribofilm with Ti3C2Tx MXene nanoflakes triggers macroscale superlubricity10.1016/j.triboint.2020.106695 ↗
28. Preparation, mechanical and anti-friction performance of MXene/polymer composites10.1016/j.matdes.2015.12.084 ↗
29. Mechanical properties and frictional resistance of Al composites reinforced with Ti3C2Tx MXene10.1016/j.cclet.2019.09.004 ↗
30. Conductive two-dimensional titanium carbide 'clay' with high volumetric capacitance10.1038/nature13970 ↗
31. Ti3C2 MXene with pillared structure for hybrid magnesium-lithium batteries cathode material with long cycle life and high rate capability10.1016/j.jcis.2021.10.175 ↗
32. Raman spectroscopy analysis of the structure and surface chemistry of Ti3C2Tx MXene10.1021/acs.chemmater.0c00359 ↗
33. Mechanical reinforcement of a high-performance aluminium alloy AA5083 with homogeneously dispersed multi-walled carbon nanotubes10.1016/j.carbon.2012.01.044 ↗
34. On the organization and thermal behavior of functional groups on Ti3C2 MXene surfaces in vacuum10.1088/2053-1583/aa89cd ↗
35. Graphene-boundary strengthening mechanism in Cu/graphene nanocomposites: a molecular dynamics simulation10.1016/j.matdes.2020.108555 ↗
36. X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)10.1016/j.apsusc.2015.11.089 ↗