journal article·2023-05Open access

Overcoming the strength-ductility trade-off in additive manufactured AlSi10Mg plates by friction stir welding at a low rotational speed

Akbar Heidarzadeh, Rasoul Khajeh, Reza Jabraeili, Hamid Reza Jafarian, Mohamed Ahmed, Nokeun Park, Unhae Lee

Abstract

The main problem in post-treatment of laser powder bed fusion (L-PBF) AlSi10Mg is the sharp reduction in strength when the ductility enhances, i.e. the problem of strength-ductility trade-off. Friction stir welding (FSW) at a low rotational speed of 200 rpm was employed to join AlSi10Mg plate produced by laser-powder bed fusion in conjunction with overcoming the strength-ductility trade-off. The microstructure, texture, and mechanical properties of the as-built and friction stir welded samples were examined. FSW resulted in the elimination of porosities, formation of ultrafine-grains with an average grain size of 0.7 μm, increment in dislocation density and Taylor factor, and fragmentation of Si particles. In addition, after FSW, B/B¯ and C shear texture components were mainly formed in the center of the stir zone, while at the shoulder-dominated zone the A1∗(111)[1¯1¯2] and A2∗(111)[112¯] components might be formed. The main grain structure formation mechanism was continuous dynamic recrystallization occurring by a gradual increase in misorientation of low angle grain boundaries and geometrically dynamic recrystallization. Consequently, tensile elongation was enhanced by ≈173%, while a negligible decrease in strength (≈9%) was observed. During tensile loading, the joint was fractured from the stir zone by the initiation of cracks from the surface of the sample, resulting in a bimodal dimple structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Advanced Welding Techniques Analysis · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends10.1016/j.jmst.2018.09.004 ↗
2. Heat treatment of aluminium alloys produced by laser powder bed fusion: a review10.1016/j.matdes.2021.109651 ↗
3. Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg
4. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg10.1016/j.actamat.2020.10.001 ↗
5. Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing10.1016/j.scriptamat.2019.05.044 ↗
6. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
7. Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution10.1016/j.pmatsci.2020.100752 ↗
8. Recent progress on control strategies for inherent issues in friction stir welding10.1016/j.pmatsci.2020.100706 ↗
9. Effect of stacking fault energy on the restoration mechanisms and mechanical properties of friction stir welded copper alloys10.1016/j.matdes.2018.11.050 ↗
10. Effect of heat input conditions on microstructure and mechanical properties of friction-stir-welded pure copper10.1007/s11661-010-0254-y ↗
11. Effect of welding heat input and post-welding natural aging on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy thin-sheet10.1016/j.msea.2012.08.105 ↗
12. Evaluation of heat input during friction stir welding of aluminium alloys10.1080/13621718.2016.1183079 ↗
13. Effect of heat input on microstructure and mechanical properties of friction stir welded AA2024 and AA7075 dissimilar alloys10.1007/s11665-021-06000-y ↗
14. Effects of heat input on tensile properties and fracture behavior of friction stir welded Mg–3Al–1Zn alloy10.1016/j.msea.2009.09.044 ↗
15. Effect of welding heat input and post-welded heat treatment on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy10.1016/S1003-6326(15)63871-7 ↗
16. New insight into the phenomenon of the abnormal grain growth in friction-stir welded aluminum10.1016/j.matlet.2021.130407 ↗
17. Joining of 3D-printed AlSi10Mg by friction stir welding10.1007/s40194-018-0585-7 ↗
18. Influence of tool rotational speed on the microstructural characterization and mechanical properties of friction stir welded Al-Si10Mg parts produced by DMLS additive manufacturing process10.1016/j.mseb.2022.115612 ↗
19. Grain structure formation and texture modification through multi-pass friction stir processing in AlSi10Mg alloy produced by laser powder bed fusion10.3390/ma16030944 ↗
20. 3D printing of Aluminium alloys: additive Manufacturing of Aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
21. Multipass friction stir processing of laser-powder bed fusion AlSi10Mg: microstructure and mechanical properties10.3390/ma16041559 ↗
22. Quantifying crystallographic texture in the probe-dominated region of thick-section friction-stir-welded aluminium10.1016/j.scriptamat.2008.04.047 ↗
23. Through-thickness crystallographic texture of stationary shoulder friction stir welded aluminium10.1016/j.scriptamat.2010.08.060 ↗
24. Effect of tool geometry and heat input on the hardness, grain structure, and crystallographic texture of thick-section friction stir-welded aluminium10.1007/s11661-018-4996-2 ↗
25. The origin of different microstructural and strengthening mechanisms of copper and brass in their dissimilar friction stir welded joint10.1016/j.msea.2018.08.068 ↗
26. Enhancing the corrosion properties of additively manufactured AlSi10Mg using friction stir processing10.1016/j.corsci.2020.109073 ↗
27. Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing
28. Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions10.1016/j.msea.2019.138210 ↗
29. Friction stir processing of AlSi10Mg parts produced by selective laser melting10.1016/j.jmatprotec.2018.08.030 ↗
30. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
31. Humphreys · 2012
32. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
33. Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments10.1016/j.msea.2017.08.029 ↗
34. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
35. Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes10.1016/j.scriptamat.2017.08.034 ↗
36. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed10.1016/j.actamat.2009.05.017 ↗
37. A model for the yield strength of overaged Al–Zn–Mg–Cu alloys10.1016/S1359-6454(03)00363-X ↗
38. Unravelling the multi-scale structure–property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg10.1038/s41598-021-85047-2 ↗
39. Strengthening mechanisms in direct metal laser sintered AlSi10Mg: comparison between virgin and recycled powders
40. Influence of predeformation and ageing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress10.1016/S1359-6454(98)00296-1 ↗
41. Precipitation hardening10.1007/BF02670416 ↗
42. Microstructure and mechanical properties of Al–12Si produced by selective laser melting: effect of heat treatment10.1016/j.msea.2013.10.023 ↗
43. Heterogeneous microstructure and voids dependence of tensile deformation in a selective laser melted AlSi10Mg alloy10.1016/j.msea.2020.140109 ↗