journal article·2023-05Open access

Effect of cooling rate on non-metallic inclusion formation and precipitation and micro-segregation of Mn and Al in Fe–23Mn–10Al–0.7C steel

Dongming Liu, Zhengliang Xue, Shengqiang Song

Abstract

The present study assesses the influence of the cooling rate on the morphology, composition, number density, size distribution of inclusions, and microsegregation of elements in Fe–23Mn–10Al–0.7 steel. The results indicate that with the increase of cooling rate from 5.1 K/s to 14.51 K/s, the total number density of inclusions increases from 28 mm−2 to 32 mm−2, with no change in the type of inclusions, the average size of MnS inclusion decreases from 9.57 μm to 5.21 μm. The precipitation and growth of MnS inclusion are predicted according to the coupled model, matching well with the experimental results. Furthermore, it is observed that AlN inclusion formed in the liquid steel can float up to the surface of the liquid steel, reducing the dissolved nitrogen content in the steel. As the cooling rate increases, the size and density of AlN inclusions on the liquid steel surface decrease. Combining the lattice mismatch of inclusions and the pushing and engulfment behavior of inclusions, the effect of cooling rate on the MnS precipitation for Al2O3 and AlN is analyzed. Moreover, under different cooling rates, Al segregation is very remarkable and it is low in interdendritic regions but high in dendrite stems.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Hot ductility behaviour of high-Mn TWIP steels10.1016/j.msea.2010.11.030 ↗
2. Development in fundamental research on TWIP steel used in automobile industry10.1179/1743281211Y.0000000048 ↗
3. Characterization of inclusions in 3rd generation advanced high-strength steels10.1007/s11663-019-01605-0 ↗
4. Effects of Al content on non-metallic inclusion evolution in Fe–16Mn–xAl–0.6C high Mn TWIP steel10.1179/1743281215Y.0000000041 ↗
5. Formation mechanism of non-metallic inclusions in Fe–23Mn–xAl–0.7C lightweight steels
6. Park J, Kim D, Min DJ. Characterization of nonmetallic inclusions in high-manganese and aluminum-alloyed austenitic steels n.d.;vol. 18. https://doi.org/10.1007/s11661-012-1088-6.10.1007/s11661-012-1088-6 ↗
7. Effect of aluminium content on the formation of inclusions in Fe–5Mn–xAl steels
8. Investigation of inclusion formation in light-weight Fe–Mn–Al steels using automated scanning electron microscope equipped with energy-dispersive X-ray spectroscopy10.1002/srin.201900477 ↗
9. Effect of nitrogen content on the formation of inclusions in Fe–5Mn–3Al steels10.3390/cryst10090836 ↗
10. Non-metallic inclusions in TWIP steel10.1002/srin.201300354 ↗
11. Characterization and analysis of non-metallic inclusions in low-carbon Fe–Mn–Si–Al TWIP steels10.1002/srin.201600131 ↗
12. Effect of Al content on non-metallic inclusions in Fe–23Mn–xAl–0.7C lightweight steels10.1080/03019233.2021.1909993 ↗
13. Nitride-inclusion characterization in lightweight steel and re-precipitation behavior of AlN during heat treatment: effect of Al content
14. Effect of manganese on precipitation mechanism of non-metallic inclusions in Fe–xMn–7Al–0.7C light-weight steel
15. The effect of cooling conditions on the evolution of non-metallic inclusions in high manganese TWIP steels10.1007/s11663-015-0568-7 ↗
16. Influence of Al and N content and cooling rate on the characteristics of complex MnS inclusions in AHSS10.3390/cryst10111054 ↗
17. Simple model of microsegregation during solidification of steels10.1007/s11661-001-0152-4 ↗
18. Mathematical analysis of solute redistribution during solidification with diffusion in solid phase10.2355/isijinternational1966.26.1045 ↗
19. Effect of cooling rate on composition of oxides precipitated during solidification of steels10.2355/isijinternational.35.708 ↗
20. Formation of TiN inclusions during solidification of Titanium micro-alloyed steel: modeling with ChemAppPy10.1007/s11663-022-02699-9 ↗
21. Effect of the cooling rate on the dendrite arm spacing and the ultimate tensile strength of cast iron10.1023/A:1004321007806 ↗
22. Deformability of oxide inclusions in tire cord steels10.1007/s11663-017-1134-2 ↗
23. Temperature dependence of the thermal expansion of AlN10.1063/1.3089568 ↗
24. Study on the precipitation and coarsening of TiN inclusions in Ti-microalloyed steel by a modified coupling model10.1016/j.jmrt.2020.03.075 ↗
25. Study of peritectic phase transition in high-Mn steel using phase-field method10.1007/s11663-021-02348-7 ↗
26. Kinetic constraints of δ-ferrite to the formation of kappa (κ) carbide in a Fe–4Mn–9Al–0.3C wt pct low-density steel10.1007/s11661-019-05568-4 ↗
27. Interaction between liquid steel and AlN substrate containing Al–Y-Oxides10.1007/s11663-019-01636-7 ↗
28. Precipitation behaviors of AlN inclusion in high-Al Steel10.1007/s11663-022-02688-y ↗
29. An overview of the effects of alloying elements on the properties of lightweight Fe–(15–35)Mn–(5–12)Al–(0.3–1.2)C steel
30. Research process on key technology of high manganese and high aluminum steel purity control
31. Prokhorenko · 1965
32. Yang · 2018
33. Dispersion behavior of MgO, ZrO2, Al2O3, CaO–Al2O3 and MnO–SiO2 deoxidation particles during solidification of Fe-10mass%Ni alloy10.2355/isijinternational.46.22 ↗
34. Mechanism of MnS precipitation on Al2O3–SiO2 inclusions in non-oriented silicon steel10.1007/s12540-018-0141-4 ↗
35. Calculation of the critical velocity for the pushing/engulfment transition of non-metallic inclusions in steel10.2355/isijinternational.38.503 ↗
36. Characteristics of non-metallic inclusions in steel obtained from different-sized samplers10.1007/s11663-017-1085-7 ↗