journal article·2023-05Open access

Ti–Mo–Zr alloys for bone repair: mechanical properties, corrosion resistance, and biological performance

Zhijun Guo, Yizhou Huang, Chunchun Sun, Zengxing He, Delin Yuan, Bianyun Cai, Yunfeng Li, Baolong Shen

Abstract

Titanium (Ti) alloys have been widely used as bone implants, but challenges such as the stress shielding effect still compromise long-term clinical successes. To improve the mechanical properties of Ti, non-toxic alloying elements zirconium (Zr) and molybdenum (Mo) were added either alone or in combination to produce Ti–Mo–Zr alloys. The influence of Zr or Mo addition on the alloy properties, such as the microstructure and the corrosion resistance, were investigated. The cytocompatibility and osteointegration of prepared alloys were evaluated to determine the potential for bone repair. The results showed that Ti–10Zr displayed an acicular α′ phase, while Ti–12Mo and Ti–12Mo–10Zr comprised a metastable β phase. Due to the solid solution and phase precipitation strengthening effect of Zr and Mo elements, the prepared alloys showed higher microhardness and compressive yield strength when compared with commercially pure Ti (CP–Ti). Ti–12Mo–10Zr possessed the lowest Young's modulus, while CP-Ti and Ti–10Zr showed a comparable Young's modulus. The corrosion resistance was in the order of Ti–12Mo–10Zr > Ti–12Mo > CP-Ti > Ti–10Zr. Notably, all alloys showed good cytocompatibility and osteointegration, which were similar to those of CP-Ti. Taken together, due to excellent material and biological performance, Ti–12Mo–10Zr presents a promising material for bone repair.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Prosthodontic principles in dental implantology: adjustments in a coronavirus disease-19 pandemic-battered economy
2. An overview of recent advances in designing orthopedic and craniofacial implants10.1002/jbm.a.34605 ↗
3. New developments of Ti-based alloys for biomedical applications10.3390/ma7031709 ↗
4. Biocompatibility of Ti-alloys for long-term implantation10.1016/j.jmbbm.2012.11.014 ↗
5. Long-term osseointegration of 3D printed CoCr constructs with an interconnected open-pore architecture prepared by electron beam melting10.1016/j.actbio.2016.03.033 ↗
6. Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model10.1016/j.spinee.2018.02.018 ↗
7. Osteogenesis of 3D printed porous Ti6Al4V implants with different pore sizes10.1016/j.jmbbm.2018.04.010 ↗
8. A review on alloy design, biological response, and strengthening of beta-titanium alloys as biomaterials10.1016/j.msec.2020.111661 ↗
9. Biomedical titanium alloys with Young's moduli close to that of cortical bone10.1093/rb/rbw016 ↗
10. Cytotoxicity of titanium and titanium alloying elements10.1177/0022034510363675 ↗
11. Structure and properties of cast binary Ti-Mo alloys10.1016/S0142-9612(99)00114-3 ↗
12. Study of the corrosion behavior of titanium and some of its alloys for biomedical and dental implant applications10.1016/S0022-0728(99)00260-0 ↗
13. Development of β-type Ti-x at. % Mo alloys by mechanical alloying and powder metallurgy: phase evolution and mechanical properties (10 ≤ x ≤ 35)10.1016/j.jallcom.2018.10.217 ↗
14. Synergistic interactions between wear and corrosion of Ti-16Mo orthopedic alloy10.1016/j.jmrt.2020.06.095 ↗
15. Investigation of the tensile properties of heat treated Ti-Mo alloys10.1016/j.matpr.2020.05.782 ↗
16. Mechanical properties, in vitro corrosion resistance and biocompatibility of metal injection molded Ti-12Mo alloy for dental applications10.1016/j.jmbbm.2018.08.038 ↗
17. A histomorphometric study of tissue interface by laminar implant test in rats
18. Interdiffusion in β-Ti–Zr binary alloys10.1016/j.jallcom.2008.02.082 ↗
19. Evaluation of low-fusing porcelain bonded to dental cast Ti–Zr alloys10.1016/j.jallcom.2008.03.040 ↗
20. Cytocompatibility of Ti-xZr alloys as dental implant materials10.1007/s10856-021-06522-w ↗
21. A review of titanium zirconium (TiZr) alloys for use in endosseous dental implants10.3390/ma5081348 ↗
22. The effect of the solute on the structure, selected mechanical properties, and biocompatibility of Ti-Zr system alloys for dental applications10.1016/j.msec.2013.09.032 ↗
23. Effects of Mo contents on the microstructure, properties and cytocompatibility of the microwave sintered porous Ti-Mo alloys10.1016/j.msec.2018.12.028 ↗
24. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility10.1016/j.scriptamat.2014.09.005 ↗
25. Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging10.1080/21663831.2017.1350211 ↗
26. Microstructural evolution of a ductile metastable β titanium alloy with combined TRIP/TWIP effects10.1016/j.jallcom.2016.12.394 ↗
27. Fabrication and characterization of a novel β metastable Ti-Mo-Zr alloy with large ductility and improved yield strength10.1016/j.matchar.2018.03.031 ↗
28. Strong and ductile beta Ti–18Zr–13Mo alloy with multimodal twinning10.1080/21663831.2019.1595763 ↗
29. Hierarchical {332}<113> twinning in a metastable β Ti-alloy showing tolerance to strain localization10.1080/21663831.2020.1745920 ↗
30. On the transformation pathways in TRIP/TWIP Ti–12Mo alloy10.1016/j.msea.2021.141672 ↗
31. Extraordinary high strength Ti-Zr-Ta alloys through nanoscaled, dual-cubic spinodal reinforcement10.1016/j.actbio.2017.01.085 ↗
32. Effect of molybdenum on structure, microstructure and mechanical properties of biomedical Ti-20Zr-Mo alloys10.1016/j.msec.2016.05.053 ↗
33. Structure, mechanical properties and grindability of dental Ti–10Zr–X alloys10.1016/j.msec.2008.05.004 ↗
34. Controlling the corrosion behavior of Ti-Zr alloy by tuning the α/β phase volume fraction and morphology of β phase10.1016/j.jallcom.2020.154153 ↗
35. Development of Ti-15Zr-Mo alloys for applying as implantable biomedical devices10.1016/j.jallcom.2018.03.308 ↗
36. Mechanical and electrochemical characterization of Ti–12Mo–5Zr alloy for biomedical application10.1016/j.jallcom.2011.05.090 ↗
37. Effect of the substitutional elements on the microstructure of the Ti-15Mo-Zr and Ti-15Zr-Mo systems alloys10.1016/j.jmrt.2015.02.007 ↗
38. A review on alloy design, biological response, and strengthening of beta-titanium alloys as biomaterials10.1016/j.msec.2020.111661 ↗
39. Linear friction welding of Ti60 near-alpha titanium alloy: investigating phase transformations and dynamic recrystallization mechanisms10.1016/j.matchar.2022.112424 ↗
40. Mechanical properties of biomedical titanium alloys
41. Development of binary and ternary titanium alloys for dental implants10.1016/j.dental.2017.07.013 ↗
42. Thermomechanical treatments influence on the phase composition, microstructure, and selected mechanical properties of Ti–20Zr–Mo alloys system for biomedical applications10.1016/j.jallcom.2019.152108 ↗
43. Electrochemical studies on zirconium and its biocompatible alloys Ti-50Zr at.% and Zr-2.5Nb wt.% in simulated physiologic media10.1002/jbm.a.30352 ↗
44. Effect of zirconium content on the microstructure and corrosion behavior of Ti-6Al-4V- x Zr alloys10.1016/j.corsci.2016.09.012 ↗
45. Microstructure, mechanical properties and corrosion behaviors of biomedical Ti-Zr-Mo-xMn alloys for dental application10.1016/j.corsci.2019.108195 ↗
46. Osteoinduction, osteoconduction and osseointegration