journal article·2023-07Open access

High temperature performance of additively manufactured Al 2024 alloy: Constitutive modelling, dynamic recrystallization evolution and kinetics

Saurabh Gairola, Gaurav Singh, R. Jayaganthan, Joe Ajay

Abstract

The current study investigates the high-temperature deformation behaviour, and microstructural evolution of the laser powder bed fused, Ti modified Al 2024 alloy. The high-temperature performance was evaluated using a hot compression test performed in the temperature range of 200–350 °C and strain rate range of 0.1–10 s−1. The flow behaviour at elevated temperatures at different strain rates can provide us insight into the high temperature application and can also be utilized for optimization of deformation-based post processing technique. The deformation-based post processing method utilizes work hardening to improve the mechanical properties and to reduce the inherent defect of additively manufactured parts, such as pores and lack of fusion. The optimal deformation conditions for these processes can be obtained from the processing map. The flow stress during different deformation conditions (strain, strain rate and temperature) was predicted using different phenomenological models such as Johnson-Cook (JC) model, strain compensated Arrhenius equation, and artificial neural network (ANN). The JC model was observed to be the least suited method in the current investigation, whereas the ANN method was observed to be best suited for predicting flow stress with an average absolute relative error of 0.5% and a correlation coefficient of 0.9998. Different deformation mechanisms such as dynamic recovery (DRV) and dynamic recrystallization (DRX) were investigated for different deformation conditions using empirical models, finite element analysis (FEA) and microstructural characterization using TEM, and EBSD. The primary DRX mechanism in the current study was observed to be continuous dynamic recrystallization or CDRX mechanism.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting10.1016/j.msea.2017.11.063 ↗
2. Changing the alloy composition of Al7075 for better processability by selective laser melting10.1016/j.jmatprotec.2016.08.003 ↗
3. Wang P, Li HC, Prashanth KG, Eckert J, Scudino S. Selective laser melting of Al-Zn-Mg-Cu : Heat treatment , microstructure and mechanical properties 2016:10–3. https://doi.org/10.1016/j.jallcom.2016.11.210.10.1016/j.jallcom.2016.11.210 ↗
4. Anisotropic high cycle fatigue property of Sc and Zr-modified Al-Mg alloy fabricated by laser powder bed fusion
5. Laser powder bed fusion of nano-CaB6 decorated 2024 aluminum alloy10.1016/j.jallcom.2021.158714 ↗
6. Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends
7. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
8. Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles10.1016/j.actamat.2020.06.026 ↗
9. High-temperature creep behavior of Al-Cu-Mg alloy10.1016/j.msea.2012.04.044 ↗
10. Hot deformation induced microstructural evolution in local-heterogeneous wire + arc additive manufactured 2219 Al alloy10.1016/j.jallcom.2021.158949 ↗
11. Towards high-temperature applications of aluminium alloys enabled by additive manufacturing10.1080/09506608.2021.1951580 ↗
12. Rollett · 2004
13. Microstructure and corrosion performance of 316L stainless steel fabricated by Selective Laser Melting and processed through high-pressure torsion10.1016/j.jallcom.2018.05.284 ↗
14. Study of the effects of hot forging on the additively manufactured stainless steel preforms10.1016/j.jmapro.2020.07.028 ↗
15. Post-treatment of additively manufactured Fe–Cr–Ni stainless steels by high pressure torsion: TRIP effect10.1016/j.msea.2021.141086 ↗
16. Overcoming the strength-ductility trade-off in additively manufactured AlSi10Mg alloy by ECAP processing
17. Tuning the defects density in additively manufactured fcc aluminium alloy via modifying the cellular structure and post-processing deformation
18. Severe plastic deformation as a processing tool for strengthening of additive manufactured alloys10.1016/j.jmapro.2021.05.070 ↗
19. The influence of severe plastic deformation on the thermal expansion of additively manufactured Ti6Al4V alloy10.1016/j.jmrt.2022.06.097 ↗
20. Optimization of hybrid manufacturing process combining forging and wire-arc additive manufactured Ti-6Al-4V through hot deformation characterization10.1016/j.jallcom.2021.162453 ↗
21. A comparative study on the phenomenological and artificial neural network models to predict hot deformation behavior of AlCuMgPb alloy10.1016/j.jallcom.2016.04.300 ↗
22. On the hot deformation behavior of Ti-6Al-4V made by additive manufacturing10.1016/j.jmatprotec.2020.116840 ↗
23. Additive manufacturing – a review of hot deformation behavior and constitutive modeling of flow stress10.1016/j.cossms.2022.100992 ↗
24. Artificial neural network modified constitutive descriptions for hot deformation and kinetic models for dynamic recrystallization of novel AZE311 and AZX311 alloys10.1016/j.msea.2021.141259 ↗
25. Dynamic recrystallization mechanisms of 2195 aluminum alloy during medium/high temperature compression deformation10.1016/j.msea.2020.140650 ↗
26. Kinetic model for describing continuous and discontinuous dynamic recrystallization behaviors of 2195 aluminum alloy during hot deformation10.1016/j.matchar.2021.111492 ↗
27. Advancement on optical methods in stress dead-zone characterisation and SIF evaluation10.1016/j.engfailanal.2022.106493 ↗
28. A fracture study of slanted cracks using the stress dead-zone hypothesis10.1111/ffe.13305 ↗
29. Stress intensity factor evaluation for central oriented cracks by stress dead-zone concept
30. Inverse finite element modeling of the barreling effect on experimental stress-strain curve for high temperature steel compression test10.1016/j.jmatprotec.2017.01.012 ↗
31. Forging property, processing map, and mesoscale microstructural evolution modeling of a Ti-17 alloy with a lamellar (α+β) starting microstructure10.1080/14686996.2017.1386530 ↗
32. Standard practice for compression tests of metallic materials at elevated temperatures with conventional or rapid heating rates and strain rates
33. Hot deformation and dynamic recrystallization in Al-Mg-Si alloy10.1016/j.matchar.2021.110976 ↗
34. Homogenization timing effect on microstructure and precipitation strengthening of 17–4PH stainless steel fabricated by laser powder bed fusion
35. Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium10.1016/S1359-6454(98)00229-8 ↗
36. A modified Zerilli-Armstrong constitutive model to predict hot deformation behavior of 20CrMo alloy steel10.1016/j.matdes.2013.10.080 ↗
37. Study on hot deformation behavior of carbon structural steel with flow stress10.1016/j.msea.2012.01.097 ↗
38. Hot deformation behaviors and processing maps of 2024 aluminum alloy in as-cast and homogenized states10.1007/s11665-015-1734-4 ↗
39. A physically-based constitutive model for hot deformation of Ti-10-2-3 alloy10.1016/j.jallcom.2016.11.208 ↗
40. Dynamic recrystallization behavior and hot workability of AZ41M magnesium alloy during hot deformation10.1016/j.jallcom.2016.02.033 ↗