journal article·2023-07Open access

Selective laser melting of 316L–CuCrZr bimetallic structure via IN718 transition layer

Zhonghua Li, Zezhou Kuai, Bin Liu, Yanlei Chen, Huodong Li, Yanyang Wang, Wenjuan Huo, Min Wei, Huirong Yang, Peikang Bai

Abstract

Steel/copper bimetallic structural materials combine the good strength and corrosion resistance of steel with the high thermal and wear resistance of copper and have been widely used in fusion reactors, conformal cooling channels, and heat transfer devices. Due to the large difference in thermal and physical properties of steel and copper, and the immiscibility of steel and copper, the bonding interface usually produces a large residual stress during the forming process, which leads to the formation of interface cracks. In order to combine CuCrZr with 316L stainless steel by using selective laser melting technology, IN718 was deposited on 316L stainless steel as a transition layer. The effects of the IN718 alloy transition layer on the microstructure, phase composition, and mechanical properties of the interface of 316L–CuCrZr were studied. IN718–316L had no defects such as pores and cracks at the interface and achieved good metallurgical bonding. The IN718–CuCrZr interface area and copper side had round key holes and relatively small pores. In the solidification process, IN718 preferentially solidified in the shape of fine particles, providing a nucleation point for the copper grain, thus forming equiaxed grains because of the high cooling rate of the interface. No macroscopic defects were observed at the bonding position of the 316L–IN718–CuCrZr samples, and the elements at the interface were fully diffused by each other. The tensile strength of the 316L–IN718–CuCrZr samples reached 403 MPa, and the interface strength was significantly improved upon the addition of the transition layer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Interface engineering of additively manufactured maraging steel-H13 bimetallic structures10.1016/j.matchar.2020.110728 ↗
2. Stainless steel to titanium bimetallic structure using LENS
3. Additive manufacturing of Inconel 718 – Ti6Al4V bimetallic structures
4. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
5. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
6. Metal additive manufacturing in aerospace: a review10.1016/j.matdes.2021.110008 ↗
7. On the role of laser in situ re-melting into pore elimination of Ti–6Al–4V components fabricated by selective laser melting10.1016/j.jallcom.2020.156866 ↗
8. Effect of input energy on hardness and surface quality in Ti64 by sputter-less selective laser melting with modulated pulse10.2351/7.0000329 ↗
9. Improved corrosion behavior of ultrafine-grained eutectic Al-12Si alloy produced by selective laser melting10.1016/j.matdes.2018.03.025 ↗
10. Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis10.1016/j.matdes.2018.01.022 ↗
11. The influence of scan length on fabricating thin-walled components in selective laser melting10.1016/j.ijmachtools.2017.11.012 ↗
12. Additive manufacturing of functionally graded materials: a review
13. Recent development in modeling and analysis of functionally graded materials and structures10.1016/j.paerosci.2015.07.001 ↗
14. Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion10.1080/17452759.2022.2028343 ↗
15. Interfacial microstructure and mechanical properties of 316L/CuSn10 multi-material bimetallic structure fabricated by selective laser melting10.1016/j.msea.2019.02.097 ↗
16. Selective laser melting of stainless steel on the copper alloy: an investigation of the interfacial microstructure and mechanical properties10.1016/j.jmapro.2022.06.055 ↗
17. Effects of process parameters on interfacial characterization and mechanical properties of 316L/CuCrZr functionally graded material by selective laser melting10.1016/j.jallcom.2021.163256 ↗
18. 3D printing of multiple metallic materials via modified selective laser melting10.1016/j.cirp.2018.04.096 ↗
19. Cu10Sn to Ti6Al4V bonding mechanisms in laser-based powder bed fusion multiple material additive manufacturing with different build strategies
20. Additive manufacturing of Zr-based metallic glass structures on 304 stainless steel substrates via V/Ti/Zr intermediate layers10.1016/j.msea.2018.05.052 ↗
21. Direct metal deposition (DMD) of H13 tool steel on copper alloy substrate: evaluation of mechanical properties10.1016/j.msea.2010.12.099 ↗
22. Diffusion bonding of 410 stainless steel to copper using a nickel interlayer10.1016/j.matchar.2010.03.006 ↗
23. The microstructure and mechanical properties of deposited-IN718 by selective laser melting10.1016/j.jallcom.2011.10.107 ↗
24. Study on the effect of powder-bed fusion process parameters on the quality of as-built IN718 parts using response surface methodology10.3390/met10091180 ↗
25. Characterization of a continuous CO2 laser-welded Fe-Cu dissimilar couple10.1007/s11661-005-0334-6 ↗
26. Laser additive manufacturing of a 316L/CuSn10 multimaterial coaxial nozzle to alleviate spattering adhesion and burning effect in directed energy deposition10.1016/j.jmapro.2022.07.038 ↗
27. Interfacial characterization and reaction mechanism of Ti/Al multi-material structure during laser powder bed fusion process10.1016/j.matchar.2022.112195 ↗
28. Effects of laser melting+remelting on interfacial macrosegregation and resulting microstructure and microhardness of laser additive manufactured H13/IN625 bimetals10.1016/j.jmapro.2021.09.036 ↗
29. Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing10.1038/s41467-022-28694-x ↗
30. Electrical and thermal properties of the interface at diffusion-bonded and soldered 304 stainless steel and copper bimetal10.1016/S0924-0136(03)00029-3 ↗
31. Characterization of diffusion bonded joint between titanium and 304 stainless steel using a Ni interlayer10.1016/j.matchar.2007.05.015 ↗
32. Investigation of copper/stainless steel multi-metallic materials fabricated by laser metal deposition10.1016/j.msea.2021.141071 ↗
33. Interfacial characteristic and mechanical performance of maraging steel-copper functional bimetal produced by selective laser melting based hybrid manufacture10.1016/j.matdes.2018.05.064 ↗
34. Interfacial characterization and mechanical properties of 316L stainless steel/inconel 718 manufactured by selective laser melting10.1016/j.msea.2019.05.011 ↗
35. Additive manufacturing of stainless steel – copper functionally graded materials via Inconel 718 interlayer10.1016/j.jmrt.2021.09.027 ↗