Investigation of un-calcined coal gangue together with ground granulated blast furnace slag and fly ash to ambient-curing production high-strength geopolymer
Source abstract
Abstract
Aim of this work is to exploit an ambient-curing method to produce high-strength geopolymers by applying un-calcined coal gangue (G). An optimized alkaline activator solution with a mixture proportion of 1.2 Ms, 8% AE, and 0.32 liquid-solid ratio was adopted to stimulate the mixture of G, ground granulated blast furnace slag (S), and fly ash (A). The geopolymer totally composed of S displayed the highest strength, which was more than 70 MPa at 28 d. Compressive strengths dramatically decreased from 55 MPa to 20 MPa when the content of G changed from 25% to 55% in S-G binary geopolymers. The strength of S-A-G ternary geopolymers did not significantly influence by the content of G until 17%, and the strengths decreased with the increasing G content as it exceeded 22%. Appropriate contents of G resulted in aluminosilicate gel formation in the ternary S-A-G geopolymers, and compressive strengths of the ambient-curing ternary geopolymers can reach ∼ 65 MPa at 28 d.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Geopolymers: ceramic-like inorganic polymers
2. Durability of geopolymer materials in sodium and magnesium sulAte solutions10.1016/j.cemconres.2004.09.002 ↗
3. Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing10.1016/j.cemconres.2006.03.022 ↗
4. Geopolymers and geopolymeric materials10.1007/BF01904446 ↗
5. Development of metakaolin based high strength recycled aggregate geopolymer concrete10.1016/j.conbuildmat.2023.131810 ↗
6. Physico-mechanical properties and micromorphological characteristics of graphene oxide reinforced geopolymer foam concrete
7. Assessment of the durability of grout submitted to accelerated carbonation test10.1016/j.conbuildmat.2017.10.111 ↗
8. Engineering properties, sustainability performance and life cycle assessment of high strength self-compacting geopolymer concrete composites10.1016/j.conbuildmat.2023.131613 ↗
9. 29Si and 27Al NMR study of the structural transformation of calcined kaolin residue-based geopolymer using low alkali activator content for sustainable construction materials
10. Influence of sintering temperature of a ceramic substrate in mortar adhesion for civil construction10.1016/j.jobe.2018.05.026 ↗
11. Improvement on pozzolanic reactivity of coal gangue by integrated thermal and chemical activation10.1016/j.fuel.2013.03.010 ↗
12. Study on the release characteristics of chlorine in coal gangue under leaching conditions of different pH values10.1016/j.fuel.2017.12.123 ↗
13. Geopolymer concrete as green building materials: recent applications, sustainable development and circular economy potentials10.1016/j.scitotenv.2022.155577 ↗
14. Experimental study on the characteristics of activated coal gangue and coal gangue-based geopolymer10.3390/en13102504 ↗
15. Preparation and characterization of coal gangue geopolymers10.1016/j.conbuildmat.2018.07.220 ↗
16. Improving strength of calcinated coal gangue geopolymer mortars via increasing calcium content10.1016/j.conbuildmat.2018.02.005 ↗
17. Preparation of coal gangue-slag-fly ash geopolymer grouting materials10.1016/j.conbuildmat.2022.126997 ↗
18. The effect of Na+ and H2O on structural and mechanical properties of coal gangue-based geopolymer: molecular dynamics simulation and experimental study10.1016/j.conbuildmat.2020.121081 ↗
19. The thermal activation process of coal gangue selected from Zhungeer in China10.1007/s10973-016-5711-4 ↗
20. Synthesis of monolithic tobermorite from blast furnace slag and evaluation of its Pb removal ability10.2109/jcersj2.116.500 ↗
21. Development of eco-efficient fly ash–based alkali-activated and geopolymer composites with reduced alkaline activator dosage10.1061/(ASCE)MT.1943-5533.0003017 ↗
22. Synthesis and characterization of geopolymers derived from coal gangue, fly ash and red mud10.1016/j.conbuildmat.2019.02.076 ↗
23. Impact behaviours of engineered geopolymer composite exposed to elevated temperatures10.1016/j.conbuildmat.2021.125421 ↗
24. An experimental study on the properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete10.1016/S0008-8846(00)00250-7 ↗
25. Properties of concrete incorporating fly ash and ground granulated blast-furnace slag10.1016/S0958-9465(02)00058-6 ↗
26. 1999
27. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
28. Effects of pre-setting chemical exchanges on geopolymers cast in saline waters10.1016/j.conbuildmat.2021.125020 ↗
29. Quantitative assessment of carbon dioxide emissions in construction projects: a case study in Shenzhen10.1016/j.jclepro.2016.09.134 ↗
30. Reactivity activation of waste coal gangue and its impact on the properties of cement-based materials – a review10.1016/j.conbuildmat.2019.117424 ↗
31. Research on cementitious behavior and mechanism of pozzolanic cement with coal gangue10.1016/j.cemconres.2004.11.004 ↗
32. Mechanical properties of gangue-containing aluminosilicate based cementitious materials
33. Toward understanding the activation and hydration mechanisms of composite activated coal gangue geopolymer10.1016/j.conbuildmat.2021.125999 ↗
34. Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems10.1007/s10853-012-6353-y ↗
35. 2011
36. Economical studies on sustainable concrete, IOSR journal of mechanical and civil engineering
37. Strength properties of slag/fly ash blends activated with sodium metasilicate and sodium hydroxide+silica fume10.3311/PPci.8270 ↗
38. Fresh and hardened properties of Fly ash–slag blended geopolymer paste and mortar10.1186/s40069-019-0360-1 ↗
39. Geopolymers and related geopolymers10.1146/annurev-matsci-070813-113515 ↗
40. Sustainable fly ash based geopolymer binders: a review on compressive strength and microstructure properties10.3390/su142215062 ↗
41. Effect of process parameters on the performance of fly ash/GGBS blended geopolymer composites
42. Chemical, mineralogical and thermal characterization of a composite alkali-activated binder based on coal gangue and fly ash10.1016/j.matpr.2022.02.477 ↗
43. Road performance analysis of cement stabilized coal gangue mixture10.1088/2053-1591/ac3e97 ↗
44. Friedel's salt formation in sulfoaluminate cements: a combined XRD and 27Al MAS NMR study10.1016/j.cemconres.2014.08.004 ↗
45. Enhancement of coal gangue performance by surAce micro-crystalline glaze derived from mineral powder
46. Effect of particle size and thermal activation on the coal gangue based geopolymer10.1016/j.matchemphys.2021.124657 ↗
47. A fifth OH-stretching band in IR spectra of kaolinites10.1006/jcis.1998.6055 ↗
48. Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide10.1016/j.tca.2012.03.021 ↗
49. Synthesis and strength optimization of one-part geopolymer based on red mud10.1016/j.conbuildmat.2016.02.099 ↗
50. Synthesis and characterization of geopolymer binders based on local materials from Burkina Aso – metakaolin and rice husk ash10.1016/j.conbuildmat.2016.07.102 ↗
51. The effects of calcium content on molecular structure and mechanical properties of sodium aluminosilicate hydrate (NASH) gels by molecular dynamics simulation10.1016/j.jnoncrysol.2020.120411 ↗
52. Study on the drying shrinkage of alkali-activated coal gangue-slag mortar and its mechanisms10.1016/j.conbuildmat.2019.07.258 ↗
53. Optimized preparation of porous coal gangue-based geopolymer and quantitative analysis of pore structure10.3390/buildings12122079 ↗
54. Experimental study on calcium carbide residue as a combined activator for coal gangue geopolymer and feasibility for soil stabilization10.1016/j.conbuildmat.2021.125465 ↗
55. Fractal analysis of relation between strength and pore structure of hardened mortar10.1016/j.conbuildmat.2016.12.152 ↗
56. Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber10.1016/j.conbuildmat.2006.08.006 ↗
57. Study on mechanical properties, freeze–thaw and chlorides penetration resistance of alkali activated granulated blast furnace slag-coal gangue concrete and its mechanism10.1016/j.conbuildmat.2022.130218 ↗