Effect of energy parameters on droplet transfer behavior and weld formation in laser-arc hybrid welding with cable-type welding wire
Source abstract
Abstract
This paper describes the droplet transfer behavior and weld formation of laser-arc hybrid welding with cable-type welding wire (CWW). The droplet transfer behavior was photographed in real time by using a high-speed camera. The effects of energy parameters on arc morphology, droplet transfer behavior and weld formation were studied through experimental and theoretical analyses. The results show that the arc is deflected toward the laser direction, and the deflection degree increases with increasing laser power. The interaction between the laser and arc is enhanced by rotating the arc. The rotating arc enhances the interaction between plasma, the arc is more compressed and the arc volume is smaller as the welding current increases. The droplet transfer frequency increased with increasing laser power and decreased after reaching the critical value. The reaction force of metal vapor and electromagnetic force affect the droplet transfer frequency, and the maximum frequency of droplet transfer is 180.8 Hz under a laser power of 2.5 kW. The rotational force promotes molten droplet transfer and maintains the axial transition, and the welding current has a strong effect on increasing the droplet transfer frequency. The influence of laser power on weld penetration is greater than that of welding current, the weld penetration increases significantly with increasing laser power, and the cross section of the weld seam exhibits laser-arc hybrid welding characteristics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Hybrid laser arc welding: state-of-art review10.1016/j.optlastec.2017.09.038 ↗
2. Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting10.1016/j.msea.2018.01.103 ↗
3. Influences of synergy effect between laser and arc on laser-arc hybrid welding of aluminum alloys10.1016/j.optlastec.2019.105766 ↗
4. Improvements of hybrid laser arc welding for shipbuilding T-joints with 2F position of 8 mm thick steel10.1016/j.optlastec.2021.107284 ↗
5. Studies on microstructure and mechanical properties of weldments produced in 12 mm thick naval grade high strength low alloy steel for sub-zero application by single and double pass hybrid laser arc welding
6. Process stability during fiber laser-arc hybrid welding of thick steel plates[J]10.1016/j.optlaseng.2017.10.020 ↗
7. Influence of energy ratio on microstructure and mechanical properties in the transition zone of hybrid laser-MIG welded AH36/316L dissimilar joints10.1016/j.jmrt.2021.10.046 ↗
8. Behavior and stability of droplet transfer under laser-MIG hybrid welding with synchronized pulse modulations10.1016/j.jmapro.2020.02.017 ↗
9. Hybrid laser-arc welding of advanced high-strength steel10.1016/j.jmatprotec.2014.06.018 ↗
10. Experimental investigation on arc characteristic and droplet transfer in CO2 laser–metal arc gas (MAG) hybrid welding10.1016/j.ijheatmasstransfer.2013.03.051 ↗
11. Stability evaluation of laser-MAG hybrid welding process10.1016/j.optlastec.2019.03.036 ↗
12. Study on droplet transfer and weld quality in laser-MIG hybrid welding of 316L stainless steel10.1007/s00170-016-8774-2 ↗
13. Behavior of the plasma characteristic and droplet transfer in CO2 laser–GMAW-P hybrid welding10.1007/s00170-014-5731-9 ↗
14. Analysis of welding process stability and weld quality by droplet transfer and explosion in MAG-laser hybrid welding process10.1016/j.jmapro.2018.03.024 ↗
15. Study on droplet transfer behavior during medium and low power laser assisted pulsed MAG hybrid welding10.1016/j.ijleo.2022.169972 ↗
16. The mechanisms of arc coupling and rotation in cable-type welding wire CO2 welding10.1016/j.jmatprotec.2017.12.032 ↗
17. Arc properties and droplet transfer characteristics in cable-type welding wire electrogas welding10.1016/j.jmapro.2018.03.021 ↗
18. Study on CO2 gas shielded welding process of cable welding wire10.3724/SP.J.1037.2012.00296 ↗
19. Effect of forces on dynamic metal transfer behavior of cable-type welding wire gas metal arc welding
20. Mechanism investigation for the influence of laser power on droplet transfer behaviors in laser-MIG hybrid welding10.1016/j.optlastec.2022.108750 ↗
21. The role of recoil pressure in energy balance during laser materials processing10.1088/0022-3727/30/18/008 ↗
22. The electrical conductivity of an ionized gas10.1103/PhysRev.80.230 ↗