Characterization of hot workability of IN617B alloy using activation energy, Zener-Hollomon parameter and hot processing maps
Source abstract
Abstract
In order to predict the hot workability of the material more accurately, this paper takes the hot deformation of IN617B as the example. The activation energy (Q) map, Zener-Hollomon parameter (Z) map, and hot processing map were established based on the hot compression tests conducted at 950-1200 °C and 0.01-5 s-1. It was found that the area with high power dissipation values (denoted by η) in the hot processing map did not match the complete dynamic recrystallization (DRX) region completely. However, the microstructure corresponding to the high η area and low Z and Q area exhibited higher DRX. Therefore, the optimal hot processing region for this alloy was determined to be 1200 °C/0.1 s-1/0.8. Under this parameter, the DRX mechanism of IN617B alloy was dominated by discontinuous dynamic recrystallization (DDRX), supplemented by small amounts of continuous dynamic recrystallization (CDRX) and twinning dynamic recrystallization (TDRX).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Phenomenological model for the effect of strain rate on recrystallization and grain growth kinetics in the 617B alloy10.1016/j.jallcom.2017.11.299 ↗
2. The characteristics of μ phase precipitated during 720°C long-term aging in alloy 617B10.1016/j.jmrt.2018.11.006 ↗
3. Microstructure and mechanical properties of alloy 617B10.1016/S1003-6326(15)63704-9 ↗
4. Effect of precipitation evolution of NiAl and Cu nanoparticles on strengthening mechanism of low carbon ultra-high strength seamless tube steel10.1016/j.msea.2023.144939 ↗
5. Evolution of texture and tensile properties of cold-rotary swaged Ti–6Al–4V alloy seamless tubing after annealing at different temperatures10.1016/j.msea.2022.143003 ↗
6. Microstructure evolution in Alloy 617 B after a long-term creep and thermal aging at 700°C10.1016/j.msea.2017.11.004 ↗
7. Hot deformation behavior of a heat-resistant alloy without γ′-phase10.1007/s42243-019-00350-7 ↗
8. The effect of Mo and Ti elements on long-term microstructure stability of 617B nickel-base superalloy10.1016/j.jallcom.2019.153217 ↗
9. High-temperature deformation behavior and processing map of the as-cast Inconel 625 alloy10.1007/s12598-020-01474-6 ↗
10. Construction of hot deformation processing maps for 9Cr-1 Mo steel through conventional and ANN approach
11. Hot deformation behavior and processing map of Cu-Cr-Nb-Zr alloy10.1007/s11665-021-06268-0 ↗
12. Development of processing map for InX-750 superalloy using hyperbolic sinus equation and ANN model10.1007/s12598-018-1043-9 ↗
13. Processing map and hot deformation behavior of Mo-Nb single crystals10.1016/S1875-5372(18)30093-6 ↗
14. Evolution of hot processing map and microstructure of as-forged nickel-based superalloy during hot deformation10.1016/j.jmrt.2023.05.060 ↗
15. Hot processing performance and microstructure of Inconel 617B for heat exchange tube of the fourth generation nuclear power system
16. Hot deformation behavior and processing map of Mg-2Zn-1Al-0.2 RE alloy10.1016/j.jre.2019.09.007 ↗
17. Characterization of hot deformation behavior of 30Si2MnCrMoVE low-alloying ultra-high-strength steel by constitutive equations and processing maps10.1007/s42243-019-00335-6 ↗
18. Evaluation of hot deformation characteristics in modified AA5052 using processing map and activation energy map under deformation heating10.1016/j.jallcom.2017.12.357 ↗
19. Processing map and hot deformation behavior of Ta-particle reinforced TiAl composite10.1016/S1003-6326(20)65240-2 ↗
20. Hot working behavior of near alpha titanium alloy analyzed by mechanical testing and processing map10.1016/S1003-6326(20)65319-5 ↗
21. Deformation behavior and softening mechanism in ferrite steel during warm deformation10.1016/j.jmrt.2022.04.067 ↗
22. Study on the hot deformation behavior and microstructure evolution of Cu-Cr-in alloy10.1007/s11665-019-03961-z ↗
23. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
24. Hot deformation characteristics and dynamic recrystallization mechanisms of a Co–Ni-based superalloy10.1016/j.msea.2020.139638 ↗
25. Simulation of the flow behavior of AZ91 magnesium alloys at high deformation temperatures using a piecewise function of constitutive equations10.1016/j.mechmat.2018.07.011 ↗
26. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
27. Caillard · 2003
28. Hot workability integrating processing and activation energy maps of Inconel 740 superalloy10.1016/j.mtcomm.2018.01.009 ↗
29. Dynamic microstructural evolution and recrystallization mechanism during hot deformation of intermetallic-hardened duplex lightweight steel10.1016/j.msea.2020.139613 ↗
30. Evolution of activation energy during hot deformation of AA7150 aluminum alloy10.1016/j.msea.2013.01.080 ↗
31. Hot deformation of ultrafine-grained Al6063/Al2O3 nanocomposites10.1007/s10853-011-5418-7 ↗
32. Characterization of hot deformation behavior of a P/M nickel-base superalloy using processing map and activation energy10.1016/j.msea.2010.07.039 ↗
33. Correlation between Zener–Hollomon parameter and necklace DRX during hot deformation of 316 stainless steel10.1016/j.msea.2008.09.073 ↗
34. Investigation on hot deformation behavior of P/M Ni-base superalloy FGH96 by using processing maps10.1016/j.msea.2010.07.040 ↗
35. Separation of dynamic recrystallization parameter domains from a chaotic system for Ti–6Al–4V alloy and its application in parameter loading path design10.1016/j.msea.2019.138745 ↗
36. Deformation behavior and processing map development of AZ91 Mg alloy with and without addition of hybrid in-situ TiC+TiB2 reinforcement10.1016/j.jallcom.2018.10.276 ↗
37. Hot deformation behavior of the post-cogging FGH4096 superalloy with fine equiaxed microstructure10.1016/j.matchar.2011.06.004 ↗
38. Hot deformation characteristics and processing map analysis for Nickel-based corrosion resistant alloy10.1016/j.jallcom.2014.10.034 ↗
39. A comparative study on the hot working behavior of inconel 718 and ALLVAC 718 plus10.1007/s11661-016-3904-x ↗