Tribological and oxidation resistance performance of Ti2AlC MAX-phase generated by reactive spark plasma sintering
Source abstract
Abstract
This study explores MAX-phase materials for self-lubricating performance in high-speed turbomachinery, especially for aircraft engines and diverse industries. Ti2AlC was effectively synthesized and sintered using spark plasma sintering (SPS) under vacuum conditions at 30 MPa and 1000 °C, followed by rigorous cyclic oxidation at 1200°C. The microstructure, element distribution, and phase analysis of the sintered and worn surfaces were examined using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). Mechanical properties were evaluated through Vickers hardness and nanoindentation tests, while tribological properties were examined using wear tests. The results indicated that TiO2 and Al2O3 had a self-lubricating or anti-wear effect, significantly decreasing the wear rate. Furthermore, a transition was observed in the wear rate, going from high to low. This change was attributed to the formation of TiC particles, which can deform plastically and further reduce the overall wear rate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Repeated crack healing in MAX-phase ceramics revealed by 4D in situ synchrotron X-ray tomographic microscopy
2. The Mn+ 1AXn phases: materials science and thin-film processing10.1016/j.tsf.2009.07.184 ↗
3. Revisiting the defect structure of MAX phases: the case of Ti4AlN3
4. Elastic and mechanical properties of the MAX phases10.1146/annurev-matsci-062910-100448 ↗
5. The effect of pre-oxidation on the hot corrosion behavior of CoNiCrAlHf alloy in Na2SO4 environment at elevated temperature10.1007/s00339-022-05897-z ↗
6. A critical review of the oxidation of Ti2AlC, Ti3AlC2 and Cr2AlC in air10.1080/21663831.2013.806364 ↗
7. Fully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1 GPa10.1038/nmat814 ↗
8. New phases' discovery in MAX family10.1016/j.ijrmhm.2012.10.011 ↗
9. Kanoun · 2012 · 177
10. Synthesis of Ti3AuC2, Ti3Au2C2 and Ti3IrC2 by noble metal substitution reaction in Ti3SiC2 for high-temperature-stable Ohmic contacts to SiC10.1038/nmat4896 ↗
11. Layered ternary M n+ 1AX n phases and their 2D derivative MXene: an overview from a thin-film perspective10.1088/1361-6463/aa57bc ↗
12. Synthesis of high-purity, isotropic or textured Cr2AlC bulk ceramics by spark plasma sintering of pressure-less sintered powders10.1016/j.jeurceramsoc.2014.11.008 ↗
13. Carbon-dots-initiated photopolymerization: an in situ synthetic approach for MXene/poly (norepinephrine)/copper hybrid and its application for mitigating water pollution10.1021/acsami.1c08111 ↗
14. Mussel-inspired polynorepinephrine/MXene-based magnetic nanohybrid for electromagnetic interference shielding in X-band and strain-sensing performance10.1021/acs.langmuir.2c00278 ↗
15. Recent trends in MXene-based material for biomedical applications
16. Synthesis and oxidation testing of MAX phase composites in the Cr–Ti–Al–C quaternary system10.1111/jace.13962 ↗
17. Poushali · 2023
18. The MN+ 1AXN phases: a new class of solids: thermodynamically stable nanolaminates
19. MXene as emerging material for photocatalytic degradation of environmental pollutants
20. Synthesis protocols of the most common layered carbide and nitride MAX phases
21. Deformation and fracture behavior of ternary compound Ti3SiC2 at 25–1300 C10.1016/S0167-577X(02)00974-6 ↗
22. High-temperature cyclic fatigue-crack growth in monolithic Ti3SiC2 ceramics10.1002/9781118787823.ch9 ↗
23. Rapid synthesis of Ti2AlC by spark plasma sintering technique10.1016/j.matlet.2004.07.052 ↗
24. Synthesis of Ti2AlC by hot pressing and its mechanical and electrical properties10.1016/S1003-6326(07)60215-5 ↗
25. Deformation of polycrystalline Ti2AlC under compression10.1007/s100190100132 ↗
26. A high oxidation resistance Ti2AlC coating on Zirlo substrates for loss-of-coolant accident conditions10.1016/j.ceramint.2019.04.089 ↗
27. Influence of cutting damage on the bending strength of Ti2AlC MAX phase machinable ceramics10.2109/jcersj2.22147 ↗
28. Yousef · 2021 · 270
29. A new method to texture dense Mn+ 1AXn ceramics by spark plasma deformation10.1016/j.scriptamat.2015.08.023 ↗
30. Microstructural evolution and wear mechanism of Ti3AlC2–Ti2AlC dual MAX phase composite consolidated by spark plasma sintering (SPS)
31. On the tribology of the MAX phases and their composites during dry sliding: a review10.1016/j.wear.2011.01.043 ↗
32. Tribological performance and phase transition of MAX-phase/YSZ abradable seal coating produced by air plasma spraying10.1016/j.ceramint.2021.10.210 ↗
33. SHS of high-purity MAX compounds in the Ti-Al-C system10.3103/S1061386208020088 ↗
34. Hot forging of MAX compounds SHS-produced in the Ti-Al-C system10.3103/S1061386209030108 ↗
35. Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC 0.5 N 0.510.1007/s11661-006-0243-3 ↗
36. Multiple crack healing of a Ti2AlC ceramic10.1016/j.jeurceramsoc.2012.01.017 ↗
37. Yang · 2012 · 22 · 8304
38. Oxidation mechanisms in bulk Ti2AlC: influence of the grain size10.1016/j.jeurceramsoc.2020.01.042 ↗
39. Kee · 2023 · 334
40. Oxidation behavior of Ti2AlC in the temperature range of 1400° C–1600° C in steam10.1016/j.jnucmat.2017.03.016 ↗
41. Zhenyu · 2020 · 502
42. Cyclic oxidation and diffusion-controlled performance of Ti2AlC MAX-phase produced by spark plasma sintering
43. J, Kinetic aspects of Ti2AlC MAX phase oxidation10.1007/s11085-015-9526-7 ↗
44. High-temperature oxidation behavior of Ti2AlC in air10.1023/A:1023092027697 ↗
45. Insights into high temperature oxidation of Al2O3-forming Ti3AlC210.1016/j.corsci.2012.01.011 ↗
46. Ultra-high temperature ablation behavior of Ti2AlC ceramics under an oxyacetylene flame10.1016/j.jeurceramsoc.2010.11.035 ↗
47. Oxidation behavior and oxide layers of Ti–50Al intermetallics by preoxidation in high-pressure oxygen
48. Static and cyclic oxidation of Ti–44Al and Ti–44Al–xNb alloys10.1023/A:1010351613733 ↗
49. Interface diffusion and reaction between TiO2 film photocatalyst and aluminium alloy substrate10.1002/sia.1041 ↗
50. Fundamentals of the oxidation of high-temperature intermetallics
51. Thermodynamic aspects of TiAl and TiSi2 oxidation: the Al-Ti-O and Si-Ti-O phase diagrams10.1007/BF00666500 ↗
52. Electronic structure and bonding properties of layered machinable Ti2AlC and Ti2AlN ceramics
53. Dislocations, kink bands, and room-temperature plasticity of Ti3SiC210.1007/s11661-999-0172-z ↗
54. Reinforcement effect of acid modified nanodiamond in epoxy matrix for enhanced mechanical and electromagnetic properties10.1016/j.diamond.2017.08.001 ↗
55. Active sites determination and de-aggregation of detonation nanodiamond particles
56. Synthesis and physiochemical performances of PVC-sodium polyacrylate and PVC-sodium polyacrylate-graphite composite polymer membrane10.1515/zpch-2020-1763 ↗
57. Carbon foam composites containing carbon nanotubes and graphene oxide as additives for enhanced mechanical, thermal, electrical and catalytic properties10.1016/j.jmrt.2023.03.056 ↗
58. Two-step approach of fabrication of interconnected nanoporous 3D reduced graphene oxide-carbon nanotube-polyaniline hybrid as a binder-free supercapacitor electrode10.1016/j.jallcom.2016.10.253 ↗
59. Preparation and structural investigations of the composite containing lead oxide and graphite as reinforcements and its adsorptive and photocatalytic dye-degradation activity10.1016/j.diamond.2023.110170 ↗
60. Recent advances in the structure and biomedical applications of nanodiamonds and their future perspectives10.1016/j.matdes.2023.112179 ↗
61. Review on the hazardous applications and photodegradation mechanisms of chlorophenols over different photocatalysts10.1016/j.envres.2021.110742 ↗
62. Thermal, mechanical, and photocatalytic dye degradation performances of the functionalized GO and TiO2 decorated carbon foam composites10.1016/j.jmrt.2023.08.065 ↗
63. Preparation and structural investigations of the composite containing lead oxide and graphite as reinforcements and its adsorptive and photocatalytic dye-degradation activity
64. First-principles study of color-tunable properties in Eu-doped Mg2SnO4 phosphors
65. Heterogeneous nucleation and growth of interlaced CuO nanosheets on porous nickel foams as binder-free electrode material10.1016/j.jmrt.2023.05.065 ↗
66. Preparation and comparative evaluation of PVC/PbO and PVC/PbO/graphite based conductive nanocomposites