Variations in microstructure and mechanical properties along thickness direction in a heavy high strength low alloy steel plate
Source abstract
Abstract
A thermal-mechanical control process (TMCP) followed by tempering at 600°C was applied to produce 420 MPa grade high strength low alloy (HSLA) steel heavy plates. The microstructure and mechanical properties through the thickness were analyzed using various techniques including optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron back-scattered diffraction (EBSD), tensile and impact tests. Microscopy analyses showed that a fine-grained structure with an average grain size of 6 ∼ 10 μm could be obtained by TMCP. After subsequent tempering, the microstructure near the surface of the plate was dominated by bainite, while the microstructure of the core was mainly characterized by aggregated carbides and ferrite. In addition, the density of high-angle grain boundaries (HAGB) on the surface was significantly higher than that in the core. Tensile tests showed a decrease in both yield and tensile strengths from 530.1 and 626.9 MPa on the surface to 384.3 and 496.7 MPa in the core, respectively. The contribution of different strengthening mechanisms to the variations in strengths along the thickness was clarified. In addition, the deformation of ferrite and the initiation of micro-voids during tensile tests were also analyzed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. An overview on pipeline steel development for cold climate applications10.1016/j.jpse.2022.01.003 ↗
2. Fatigue crack growth prediction method for offshore platform based on digital twin10.1016/j.oceaneng.2021.110320 ↗
3. Effect of Nb on the microstructure and properties of Ti-Mo microalloyed high-strength ferritic steel10.1016/j.msea.2018.08.092 ↗
4. Effects of carbon content and cooling path on the microstructure and properties of TRIP-aided ultra-high strength steels10.2355/isijinternational.53.337 ↗
5. Effect of composition and thermo-mechanical processing schedule on the microstructure, precipitation, and strengthening of Nb-microalloyed steel10.1016/j.msea.2017.02.101 ↗
6. Optimization of TMCP strategy for microstructure refinement and flow-productivity characteristics enhancement of low carbon steel10.1016/j.jmrt.2019.04.021 ↗
7. Investigating nano-precipitation in a V-containing HSLA steel using small angle neutron scattering10.1016/j.actamat.2017.11.032 ↗
8. Study of the kinetics of austenite grain growth by dynamic Ti-rich and Nb-rich carbonitride dissolution in HSLA steel: in-situ observation and modeling10.1016/j.matchar.2020.110612 ↗
9. A micro-alloyed ferritic steel strengthened by nanoscale precipitates10.1016/j.msea.2011.07.065 ↗
10. Microstructure characteristics and impact fracture mechanisms of Nb and V–Ti micro-alloyed offshore platform steels10.1016/j.vacuum.2021.110709 ↗
11. Quantitative analysis of Mo solute drag effect on ferrite and bainite transformations in Fe-0.4C-0.5Mo alloy10.1016/j.actamat.2019.07.040 ↗
12. Mechanical properties distribution through the thickness of heavy gauge steel plate rolled in intercritical region10.2355/tetsutohagane.100.1097 ↗
13. Unraveling the effects of Nb interface segregation on ferrite transformation kinetics in low carbon steels10.1016/j.actamat.2021.117081 ↗
14. Isothermal holding processes of a reduced activation ferritic/martensitic steel to form a bainitic/martensitic multiphase microstructure and its mechanical properties10.1016/j.msea.2021.141645 ↗
15. Understanding the delamination and its effect on Charpy impact energy in thick wall line pipe steel
16. Influence of roll bending on center segregation in continuously cast slabs10.2355/isijinternational.31.1408 ↗
17. Characterisation of segregation band distributions in hot-rolled alloy steels10.4028/www.scientific.net/KEM.230-232.327 ↗
18. Thickness effect on microstructure, strength, and toughness of a quenched and tempered 178 mm thickness steel plate10.3390/met10050572 ↗
19. Study of the impact properties and microstructure evolution in a high-strength low-alloy heavy steel10.1016/j.msea.2021.141404 ↗
20. Microstructure-property relationship in a high strength-high toughness combination ultra-heavy gauge offshore plate steel: the significance of multiphase microstructure10.1016/j.msea.2017.02.058 ↗
21. Investigation on tempering of granular bainite in an offshore platform steel10.1016/j.msea.2014.12.074 ↗
22. Evolution of microstructure and mechanical properties during quenching and tempering of ultrahigh strength 0.3C Si-Mn-Cr-Mo low alloy steel10.1007/s10853-009-4160-x ↗
23. Automation of intercept method for grain size measurement: a topological skeleton approach10.1016/j.matdes.2022.111358 ↗
24. X-ray evaluation of dislocation density in ODS-Eurofer steel10.1016/j.msea.2011.11.051 ↗
25. Evolution of dislocation density in bainitic steel: modeling and experiments10.1016/j.actamat.2018.02.023 ↗
26. Quantitative phase analysis of martensite-bainite steel using EBSD and its microstructure, tensile and high-cycle fatigue behaviors10.1016/j.msea.2020.139375 ↗
27. The morphology and crystallography of lath martensite in alloy steels10.1016/j.actamat.2006.07.009 ↗
28. Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel10.1016/j.jmst.2020.04.001 ↗
29. Militzer · 2022
30. Microstructural characteristics with various cooling paths and the mechanism of embrittlement and toughening in low-carbon high performance bridge steel10.1016/j.msea.2012.08.091 ↗
31. Influence of primary annealing condition on texture development in grain oriented electrical steels10.1016/S1359-6454(02)00034-4 ↗
32. Formation of bainite as a diffusional-displacive phase transformation10.1016/S1359-6462(02)00127-6 ↗
33. The onset temperatures of gamma to alpha-phase transformation in hot deformed and non-deformed Nb micro-alloyed steels10.2355/isijinternational.46.579 ↗
34. Transformation of M/A constituents during tempering and its effects on impact toughness of weld metals for X80 hot bends10.1155/2019/6429045 ↗
35. Carbide precipitation kinetics in austenite of a Nb–Ti–V microalloyed steel10.1016/j.msea.2011.03.086 ↗
36. Physical metallurgy characteristics of the M/A constituent formation in granular bainite10.1016/S0924-0136(96)02578-2 ↗
37. Tensile deformation mechanism and micro-void nucleation of Ti-55531 alloy with bimodal microstructure10.1016/j.jmrt.2020.11.008 ↗
38. Tensile deformation behavior of ferrite-bainite dual-phase pipeline steel10.1016/j.msea.2021.142230 ↗
39. Relationship between microstructure, mechanical properties and damage mechanisms in high martensite fraction dual phase steels10.2355/isijinternational.ISIJINT-2015-186 ↗
40. Structural hierarchy defeats alloy cracking10.1126/science.abk1671 ↗
41. Yong · 2006
42. Solubility products for titanium-, vanadium-, and niobium-carbides in ferrite10.1016/S0956-716X(99)80002-8 ↗
43. Co-strengthening of dislocations and precipitates in alumina-forming austenitic steel with cold rolling followed by aging10.1016/j.msea.2021.142181 ↗
44. Strengthening mechanisms of a new 700MPa hot rolled Ti-microalloyed steel produced by compact strip production10.1016/j.jmatprotec.2010.05.018 ↗
45. Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides10.2355/isijinternational.44.1945 ↗
46. Effect of hot rolling deformation on microstructure and mechanical properties of a high-Ti wear-resistant steel