Investigation of the dynamic mechanical properties and damage mechanisms of fiber-reinforced cemented tailing backfill under triaxial split-Hopkinson pressure bar testing
Source abstract
Abstract
The filling method is a widely-used mining technique, and the performance of cemented tailings backfill (CTB) determines the quality of filling. However, the mechanical properties of conventional CTB are limited in terms of their crack resistance and toughness under complex stress environments. Polypropylene fiber-reinforced cemented tailing backfill (PFRCTB) is a filling type that is currently receiving significant attention. This paper investigates PFRCTB dynamic mechanical properties and damage mechanisms under different strain rate conditions using a triaxial Hopkinson pressure bar test apparatus at five confining pressures (0∼4 MPa). The results indicate that the strain rate enhancement effect of PFRCTB under dynamic loading is very significant with the enhancement effect of confining pressure, and the presence of confining pressure significantly changes the stress-strain curve. In the absence of confining pressure, the specimens showed outwardly expanding circular table-like damage with increasing strain rate, and the crack volume and surface area increased in a stepwise manner, and the hollow cylindrical polypropylene fibers showed flat damage, at which time the polypropylene fibers were subjected to ultimate strain rates ranging from 206.5s-1 to 232.3s-1 . When the confining pressure gradually increased, the outward expansion of the specimen was gradually curbed until there was no obvious damage inside . At this time the fibers appear to split, bend and pull out.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tailings Management and Properties · Rock Mechanics and Modeling · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Stability and deformation of surrounding rock in pillarless gob-side entry retaining10.1016/j.ssci.2011.09.010 ↗
2. Spatial and temporal variation of vegetation cover in the main mining area of Qibaoshan Town, China: potential impacts from mining damage, solid waste discharge and land reclamation10.1016/j.scitotenv.2022.160392 ↗
3. Solid wastes generation in India and their recycling potential in building materials10.1016/j.buildenv.2006.04.015 ↗
4. Hustrulid · 2001
5. Climate impact of China's promotion of the filling mining method: bottom-up estimation of greenhouse gas emissions in underground metal mines10.3390/en14113273 ↗
6. Study on the strength characteristics and failure characteristics of the composite load-bearing structure in the cemented filling field10.1016/j.conbuildmat.2022.127242 ↗
7. Strength evolution and deformation behaviour of cemented paste backfill at early ages: effect of curing stress, filling strategy and drainage10.1016/j.ijmst.2016.05.039 ↗
8. A review of underground mine backfilling methods with emphasis on cemented paste backfill
9. Cellulosic fiber reinforced cement-based composites: a review of recent research10.1016/j.conbuildmat.2015.01.035 ↗
10. Conductivity of carbon fiber reinforced cement-based composites10.1016/S0958-9465(02)00138-5 ↗
11. Influence of fiber and cement addition on behavior of sandy soil10.1061/(ASCE)1090-0241(1998)124:12(1211) ↗
12. Behavior of cement-stabilized fiber-reinforced fly ash-soil mixtures10.1061/(ASCE)1090-0241(2001)127:7(574) ↗
13. Physical and mechanical properties of durable sisal fiber–cement composites10.1016/j.conbuildmat.2009.10.030 ↗
14. Study on the damage behavior and energy dissipation characteristics of basalt fiber concrete using SHPB device10.1016/j.conbuildmat.2023.130413 ↗
15. Compressive fatigue behavior and failure evolution of additive fiber-reinforced cemented tailings composites10.1007/s12613-021-2351-x ↗
16. Investigation on the flexural strength, failure pattern and microstructural characteristics of combined fibers reinforced cemented tailings backfill10.1016/j.conbuildmat.2021.124005 ↗
17. Fiber type effect on strength, toughness and microstructure of early age cemented tailings backfill10.1016/j.conbuildmat.2019.06.221 ↗
18. Strength, acoustic, and fractal behavior of fiber reinforced cemented tailings backfill subjected to triaxial compression loads10.1016/j.conbuildmat.2022.127667 ↗
19. Reinforcement effect of polypropylene fiber on dynamic properties of cemented tailings backfill under SHPB impact loading10.1016/j.conbuildmat.2021.122417 ↗
20. Fiber length effect on strength properties of polypropylene fiber reinforced cemented tailings backfill specimens with different sizes10.1016/j.conbuildmat.2020.118113 ↗
21. Effect of height to diameter ratio on dynamic characteristics of cemented tailings backfills with fiber reinforcement through impact loading10.1016/j.conbuildmat.2022.126448 ↗
22. The effect of confining pressure on mechanical properties in coal and rock: review and new insights10.1007/s12517-021-08553-7 ↗
23. Progressive damage behaviours of triaxially confined rocks under multiple dynamic loads10.1007/s00603-021-02408-z ↗
24. Investigations of groundwater bursting into coal mine seam floors from fault zones10.1016/j.ijrmms.2003.01.004 ↗
25. Dynamic mechanical properties of an ore rock with varying grade and engineering applications in mines10.1007/s00366-021-01394-8 ↗
26. Study on characteristic stress and energy damage evolution mechanism of cemented tailings backfill under uniaxial compression10.1016/j.conbuildmat.2021.124333 ↗
27. Strength and deformation behaviors of cemented tailings backfill under triaxial compression10.1007/s11771-020-4568-7 ↗
28. Stability analysis of large-scale stope using stage subsequent filling mining method in Sijiaying iron mine10.1016/j.jrmge.2014.11.003 ↗
29. Experimental research on the dynamic mechanical properties and damage characteristics of lightweight foamed concrete under impact loading10.1016/j.ijimpeng.2020.103558 ↗
30. Damage behavior and energy absorption characteristics of foamed concrete under dynamic load10.1016/j.conbuildmat.2022.129340 ↗
31. A review on dynamic mechanical properties of natural fibre reinforced polymer composites10.1016/j.conbuildmat.2015.12.075 ↗
32. Evaluation of classic and 3D glass fiber reinforced polymer laminates through circular support drop weight tests10.1016/j.compositesb.2019.03.078 ↗
33. Experimental research on dynamic mechanical characteristics of layered composite coal-rock10.1590/1679-78256721 ↗
34. Load-carrying capacity of circular recycled aggregate concrete-filled steel tubular stub columns under axial compression: reliability analysis and design factor calibration
35. Fracture characteristics of sustainable crumb rubber concrete under a wide range of loading rates10.1016/j.conbuildmat.2022.129474 ↗
36. Experimental study on dynamic mechanical property of cemented tailings backfill under SHPB impact loading10.1007/s12613-019-1749-1 ↗
37. Dynamical mechanical properties and microstructure characteristics of cemented tailings backfill considering coupled strain rates and confining pressures effects10.1016/j.conbuildmat.2022.126321 ↗
38. CT scanning of internal crack mechanism and strength behavior of cement-fiber-tailings matrix composites10.1016/j.cemconcomp.2020.103865 ↗
39. Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials
40. Strain-rate effects on the strength and fragmentation size of rocks10.1016/j.ijimpeng.2009.04.008 ↗
41. Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete10.1016/j.conbuildmat.2013.05.063 ↗
42. Dynamic behaviour of cement mortars reinforced with glass and basalt fibres10.1016/j.compositesb.2016.02.035 ↗
43. Effect of specimen size on static strength and dynamic increase factor of high-strength concrete from SHPB test10.1520/JTE103370 ↗
44. Dynamic triaxial compression tests on sandstone at high strain rates and low confining pressures with split Hopkinson pressure bar10.1016/j.ijrmms.2018.12.005 ↗
45. Study on mechanical properties and deformation of coal specimens under different confining pressure and strain rate10.1016/j.tafmec.2022.103287 ↗