Improving the accuracy of stereolithography 3D printed Al2O3 microcomponents by adding photoabsorber: Fundamentals and experiments
Source abstract
Abstract
Ceramic microcomponents have a wide range of applications in microfluidic, sensors, etc. Stereolithography 3D printing technology provided a shortcut for the preparation of this small-size and complex component. With the development of device miniaturization, the existing stereolithography forms cannot meet the demand. To prepare smaller components, it is necessary to decrease the slice thickness (Cs). But during the stereolithography 3D printing, ceramic is usually easy to over-cure, leading to the key issue in the stereolithography of ceramic microcomponents: the mismatching between the curing thickness (Cp) and the slice thickness (Cs). To solve the problem above, this paper started from the stereolithography mechanism of the ceramic/resin slurry and adjusted the matching relationship between Cp and Cs theoretically by adding a photoabsorber. Then, from the experiments, the influence of different content of photoabsorber (carbon black) on curing thickness, printing accuracy, and sintering accuracy, were studied. Al2O3 ceramic microcomponents that met the design requirements were thus prepared. These results would help in the development of stereolithography 3D printing of ceramic microcomponents.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications · Interactive and Immersive Displays
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Additive manufacturing, quasi-static and dynamic compressive behaviours of ceramic lattice structures10.1016/j.jeurceramsoc.2022.08.018 ↗
2. Preparation of porous SnO2-based ceramics with lattice structure by DLP10.1016/j.ceramint.2022.01.350 ↗
3. 3D printing of ceramic cellular structures for potential nuclear fusion application
4. Fabrication and biological evaluation of 3D-printed calcium phosphate ceramic scaffolds with distinct macroporous geometries through digital light processing technology10.1093/rb/rbac005 ↗
5. Highly porous ZrO2 cellular ceramics with 3D network architecture10.1016/j.ceramint.2019.11.207 ↗
6. Fabrication and deformation of three-dimensional hollow ceramic nanostructures10.1038/nmat3738 ↗
7. Novel silica sand hollow fibre ceramic membrane for oily wastewater treatment10.1016/j.jece.2020.104975 ↗
8. Double-layer ceramic-carbonate hollow fiber membrane with superior mechanical strength for CO2 separation10.1016/j.memsci.2022.120701 ↗
9. Strong, lightweight, and recoverable three-dimensional ceramic nanolattices10.1126/science.1255908 ↗
10. Long-lifetime water-washable ceramic catalyst filter for air purification10.1038/s41467-023-36050-w ↗
11. Additive manufacturing and testing of a ceramic heat exchanger for high-temperature and high-pressure applications for concentrating solar power10.1016/j.solener.2022.03.046 ↗
12. Polymer-derived ceramic thin-film temperature sensor10.1016/j.sna.2021.113038 ↗
13. Recent trends of ceramic humidity sensors development: a review10.1016/j.snb.2016.01.015 ↗
14. Thermal lens effect and laser characteristics of Ho:YAG ceramic laser with a concave-convex cavity10.1016/j.ijleo.2020.165307 ↗
15. Microwave-assisted synthesis of uranium doped Y2Zr2O7 transparent ceramics as potential near-infrared optical lens10.1016/j.scriptamat.2019.11.007 ↗
16. Rare-earth ion doped niobium germanate glasses and glass-ceramics for optical device applications10.1016/j.jlumin.2019.05.012 ↗
17. High temperature ceramic radomes (HTCR) – a review10.1016/j.ceramint.2021.04.203 ↗
18. Thermally stable polymer–ceramic composites for microwave antenna applications10.1007/s40145-016-0199-8 ↗
19. High-quality-factor AlON transparent ceramics for 5 GHz wi-fi aesthetically decorative antennas10.1021/acsami.1c12223 ↗
20. A comprehensive study on high-temperature oxidation behavior of ceramic molds for hot embossing10.3390/ma15228045 ↗
21. Directed fabrication of ceramic nanostructures on fragile substrates using soft-electron beam lithography (soft-eBL)10.1109/TNANO.2008.917793 ↗
22. 3D-Printed micro/nano-scaled mechanical metamaterials: fundamentals, technologies, progress, applications, and challenges10.1002/smll.202206391 ↗
23. 3D printing with cellulose materials10.1007/s10570-018-1888-y ↗
24. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization10.1146/annurev-matsci-070115-031841 ↗
25. 3D-printed bioinspired Al2O3/polyurea dual-phase architecture with high robustness, energy absorption, and cyclic life10.1016/j.cej.2023.142378 ↗
26. Mechanical properties of additively manufactured Al2O3 ceramic plate-lattice structures: experiments & Simulations10.1016/j.compstruct.2023.116792 ↗
27. Ultrahigh strength printed ceramic lattices10.1016/j.jallcom.2019.05.117 ↗
28. Digital light processing 3D printing of ceramic shell for precision casting10.1016/j.matlet.2020.128037 ↗
29. Thermal design, optimization and additive manufacturing of ceramic regular structures to maximize the radiative heat transfer10.1016/j.matdes.2018.107539 ↗
30. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing10.1016/j.ceramint.2018.09.152 ↗
31. Poly(Caprolactone)-Based resin for tissue engineering-synthesis, characterisation and use in stereolithography10.3390/molecules26051199 ↗
32. Carbon nanotubes as light absorbers in digital light processing three-dimensional printing of SiCN ceramics from preceramic polysilazane10.1016/j.ceramint.2020.04.282 ↗
33. High-Precision 3D printing of high-strength polymer-derived ceramics: impact of precursor's molecular structure10.1002/adem.202200269 ↗
34. Photopolymerization and photostructuring of molecularly imprinted polymers10.1021/acsapm.1c00661 ↗
35. Relationship between the adhesion properties of UV-curable alumina suspensions and the functionalities and structures of UV-curable acrylate monomers for DLP-based ceramic stereolithography10.1016/j.ceramint.2021.08.166 ↗
36. The effect of light scattering in stereolithography ceramic manufacturing10.1016/j.jeurceramsoc.2021.07.017 ↗
37. Process parameters appraisal of fabricating ceramic parts based on stereolithography using the Taguchi method10.1177/0954405412442607 ↗
38. Theoretical prediction and experimental validation of the digital light processing (DLP) working curve for photocurable materials
39. Scattering of ultraviolet radiation in turbid suspensions10.1063/1.364311 ↗
40. Modeling and visualization of layered curing conversion profile in ceramic mask projection stereolithography process10.1016/j.ceramint.2020.07.053 ↗
41. The cure performance of modified ZrO2 coated by paraffin via projection based stereolithography10.1016/j.ceramint.2018.10.003 ↗